Jump to content
SAU Community

R32 GTR custom gauge holders

Malachi1364
 Share

Recommended Posts

Malachi1364 Apprentice

Malachi1364

Posted
Posted (edited)

I have recently started making some aftermarket gauge holders that fit 52mm gauges and fit into the stock triple gauge holder location on the r32 GTR. Some slight modification is required to get the unit to fit but once installed it looks just like factory. The only modification required is to cut a small slit in the plastic mounting location to allow the holder to slide up into its stock spot since the front plate is not removable like the stock on is. They are made out of 6061 Aluminum and four M5x.8 mounting bolts will be included with the unit. I am selling them for $120USD shipped to anywhere in the USA. And $130USD shipping to Australia. I currently have 10 units available. I will be making more based on demand.

I have tested this unit with both AEM and Defi gauges and both fit perfectly. If you have a different brand gauge just let me know what size the gauge measures across and I can verify for correct fitment.

I respond to Email quicker than I do a PM on the forum. So if you would like to email me at [email protected] that would be greatly appreciated

 

IMG_2329.JPG

IMG_2330.JPG

IMG_2331.JPG

Edited by Malachi1364
Link to comment
https://www.sau.com.au/forums/topic/473857-r32-gtr-custom-gauge-holders/
Share on other sites
  • 2 weeks later...
  • 2 weeks later...
Milhouse Enthusiast

Milhouse

Posted
Posted

Received my gauge holder which was very well packaged and had good communication from Ben. Looks very professional and well made so look forward to getting some gauges in it and brightening up my centre console! Thanks Ben

IMG_2390.jpgIMG_2391.jpgIMG_2392.jpg

  • 1 month later...
Malachi1364 Apprentice

Malachi1364

Posted
  • Author
Posted

I personally have never tried them on a gtst because I live in the USA and only know people who have imported GTR's. But if the Center console is the same then it should fit just fine. As long as the stock triple gauge holder from the GTR fits into your GTST then my part will also.

Also thanks Milhouse for the positive feedback! I appreciate it!

  • Like 1
  • 10 months later...
  • 9 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      The car revs up through the gears much better/faster now, and fuel consumption doesn't really seem to have be affected either on a Hwy cruise, which wasn't expected  The FAB9 intake manifold has been problematic sourcing though, I've contacted Plasmaman to ask about their intake, which you can get different runner lengths spec'd, and, their different options for throttle bodies  The only real physical drawback with the Plasmaman intake is how to connect it to my current OEM style airbox, as FAB9 make a OEM style back half of the airbox to suit the larger diameter throttle body, and all that is required is a 30°bend silicone pipe to mate the throttle body to the airbox Car also goes in for some exhaust work in a week or so to fit the biggest resonator they can fit clearance wise in the front pipe to help remove some of the drone, there isn't alot of realestate under there, a rough guesstimation is it will only be about 3-400mm long and maybe 90-100mm diameter, and with a 60mm exhaust that doesn't leave alot of space for the internal volume of the resonator to do its thing I'm thinking I may need to bin the "high flow" 100 cell cat for something a bit more substantial, yeah, and restrictive, like a 200-400 cell, to help, but, I have ample room for a really large bodied cat to replace the current one which has around a 4" diameter body I may look around in the recycling bins and see if I can find a massive newish cat that was "replaced" with some new full exhaust system that the local exhaust shop in Western Sydney is doing
    • r32-25t
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By r32-25t · Posted

      www.rollracing.com.au tickets aren’t live yet 
    • Dose Pipe Sutututu
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By Dose Pipe Sutututu · Posted

      Hahah look at that smile 😂 Just like those ones on IG where they compare the husband in family photos vs husband going fishing lol. I don't think I'll participate this time, clutch isn't in and also the last time I went there were too many numpties on the cruise sessions. Nearly caused a few accidents holding up people and a few guys initiating massive kerb to kerb drifts with heaps of cars right behind them. Not to mention, there were guys on the track session using it as a power cruise session.
    • The Bogan
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By The Bogan · Posted

      Is there an actual website thingie for peoples who don't have Facebooks? Cheers
    • soviet_merlin
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By soviet_merlin · Posted

      All Jap Day is coming up again! 13th of July this year. Are you going? Tickets go on sale on Wednesday 6pm. Please let Quang know as well. https://m.facebook.com/photo.php?fbid=1163155775853542   I still get shit from my wife for this photo because it is the happiest she has ever seen me. And it's not with her, it's in someone else's car.   Quang's EVO is sick, but that rotary wagon flying past was absolutely bonkers.  
×
×
  • Create New...