Jump to content
SAU Community

Nolathane or Superpro

Adz2332
 Share

Recommended Posts

Adz2332 Grand Master

Adz2332

Posted
Posted

Im looking to put all new rubbers in the front end of the 32 as it is getting a new engine so thought i would while its all out.

ive looked around and have two options that ive found, nolathane or superpro

Whos has used each?

Recommendations?

Price etc?

 

Link to comment
https://www.sau.com.au/forums/topic/473971-nolathane-or-superpro/
Share on other sites
GTSBoy Grand Master

GTSBoy

Posted
Posted

Well, yeah.  Superpro is pretty much the default choice.

Look up my recentish posts on the topic of the GKTech FUCAs.  Worth a look at, even if they aren't road legal.  Urethane bushes in the stock Nissan 32 FUCAs arre not great.  Same same with using rose joints on the caster rods, rather than urethane bushes in the stockers.  I posted years and years ago about how much better they were.  If you were to do those things, then the only remaining bushes in the front end are the lower control arms and the ARBs.

zoomzoom Mentor

zoomzoom

Posted
Posted

I've been running just about every superpro bush since 2012. Control arms, castor, steering rack etc. While they're fine and have been silent, if you can simply put in a new adjustable item with new bushes, do that. Don't bother replacing the bushes.

hardsteppa Grand Master

hardsteppa

Posted
Posted
2 hours ago, Adz2332 said:

whiteline do just the replacement bushes also?

i'm pretty certain whiteline and nolathane are same company (Redranger Pty Ltd). I have some whiteline, some nolathane, some superpro across the car...can't say I see a difference, just the different design you may prefer between manufacturers, eg, diff bushes. Urethane bushes have been around that long I'd be surprised if either company had some miracle advantageous compound over that of their competitor...but still charge a similar price for their product. I'd use whichever you can get cheapest.

Although as above, might be better to just spend a little more and get whole new adjustable arms, and some bushes are better rosejointed.

Duncan Grand Master

Duncan

Posted
Posted

hmmmm....I saw a pair of gtech upper arms snapped at the welds just last week. the car looked hard to drive after that. I suspect there is no good option for 32 upper arms, maybe the nismo brackets are the best idea.

I did run nolathene bushes back in the day, pretty sure they went broke and got bought our like Andy said. They worked fine but degraded quickly over time, they only lasted 1-2 seasons before needing re-doing which was a PITA to do again.

djr81 Grand Master

djr81

Posted
Posted

Hmm. I flogged out the trailing upper front bush in one track day. It was a white line. Thing that fixes it is moving the pick up point for that link.

Do the super pro bushes have pigtails for grease retention. The photos don't appear to show them. Or are they all the same? The nolathane bushes are dimensionally the same as the Whiteline bushes.

GTSBoy Grand Master

GTSBoy

Posted
Posted
4 hours ago, Duncan said:

hmmmm....I saw a pair of gtech upper arms snapped at the welds just last week. the car looked hard to drive after that. I suspect there is no good option for 32 upper arms, maybe the nismo brackets are the best idea.

I did run nolathene bushes back in the day, pretty sure they went broke and got bought our like Andy said. They worked fine but degraded quickly over time, they only lasted 1-2 seasons before needing re-doing which was a PITA to do again.

That's not really what I wanted to hear about the GK-Tech uppers.  I'm going to have to cross my fingers and hope, because I'm not going back to stock arms.

 

The recommendation for stock arms is all well and good, but if you need to correct camber you're up shit creek with the stockers.  That's the reason that I put (originally) Whiteline and then at least 2 sets of Superpro in the front of my car over the years.  Even with grease nipples added (I added them myself in ~2002) the bushes take a beating.

I might have to modify my spare brackets to Nismo spec and try with new urethanes in my adjustable stockers if I break a GK-Tech arm. 

Duncan Grand Master

Duncan

Posted
Posted

well the good news is my upper arm bushes have been lasting twice as long (you know 3-4 weekends instead of 1-2) since I move the LCA mouting points outwards 20mm. Its definitely a 30 year old geometry issue.

Adz2332 Grand Master

Adz2332

Posted
  • Author
Posted
9 hours ago, Meathead said:

If your OEM ones are flogged out just replace them with OEM or Nismo.

Wouldn't waste my time with short duration cheap plastic stuff unless you like pulling it down a lot.

 

 

Who sells OEM?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Watermouse
      Stock rb25det neo questions

      By Watermouse · Posted

      GTSBoy on your suggestion on another thread I had a look at those injectors and ended up getting them because of the quality.  Got the expensive ones.  
    • PranK
      Happy New Year!

      By PranK · Posted

      Happy new year!
    • eli995
      R32 gtr hood latch support/lock part number search

      By eli995 · Posted

      Hey guys been looking everywhere to try and find the correct gtr hood latch support part number but only found the first half and when I search with that number it sends me to an r34. The first part I found was 62515. If anyone could help me with the rest then I’d really appreciate it. Or if there’s some alternative hood latch support that would work even better cause I can’t find any for sale. (Searched on upgarage, partsouq,buyee,rhdjapan) 
    • GTSBoy
      Stock rb25det neo questions

      By GTSBoy · Posted

      If you've only done the upper control arms on the rear, AND you have changed their length (by more than about 1mm) to set the camber you want, then you will definitely need/want to install traction arms also. Adjusting the camber arms on their own WILL introduce bump steer and make the car unpleasant to drive. Most owners have no idea that their car could behave infinitely better than what they put up with. I'm not entirely sure what the Stageas need, but I am thinking that unless you have massive front spring rates and pretty soft rear springs, you have waaaay too much rear bar. Oversteer city, in my estimation. Combined with possible excessive bump steer from maladjusted arms, that could be a recipe for nastiness. ATR43SS2 is not a highflow. It is an outright replacement turbo. It's a little bit bigger than the largest highflow profile that Tao does. Probably a solid 300rwkW turbo where the bigger highflows will be about 30-40rwkW less. Nevertheless, we're only talking about ~300 rwkW, which is well within the abilities of the stock ECu to run with a Nistune on board. I would do so without hesitation - and I will be doing so when I get my finger out and actually get the injectors and AFM installed. But, if you would prefer to drop a whole lot more money on the ECU side, then I suspect you're looking at Haltech. The Haltech fanbois here will all spout on about all the available engine protection you can have, that you can't have with the Nistune option. And they're right. But it doesn't really come for free either. You will spend more money on extra sensors and the like, plus the work to install them. If the engine was built and therefore represented a big investment to protect, then I'd say definitely do it. If you view the current (and forever into the future) shortage of replacement engines as something to prompt similar protection, then also, do it. If you see a destroyed RB25 as an opportunity to put in a Mercedes or other V12 (like I kinda do)... then your perception of the risk/reward might differ. These are good injectors. You can also get a "better" set of the same with more flow matching, for more $$. 1000cc is where you will want to be. You will need an R35 AFM and adapter tube if you want to stay with Nistuned stock ECU. Otherwise, if going Haltech, you can ignore. As for intercooler. Just about anything will do. You're only talking about ~300rwkW. Just put a big core in there. Be aware that return flows do add significant pressure drop and will cost power and will make the turbo work harder to achieve the same goals. If you can manage a proper crossflow, do it. I'm keeping my very good return flow because I'm only expecting to be in the ~250rwkW range, and will live with whatever outcome I get.
    • Millerman
      Jdm toll card reader talky box

      By Millerman · Posted

      I have a heap that i have collected if you want some authentic ones still. Pm me if your interested!
×
×
  • Create New...