Jump to content
SAU Community

R32 Gtr attesa 4wd randomly doesn’t want to work now...

SiR_RB
 Share

Recommended Posts

SiR_RB Grand Master

SiR_RB

Posted
Posted (edited)

Hi fellas

My cars been off the road for about 4/5weeks as I broke my gearbox selector so gearbox was getting refreshed 

while I was waiting for it to come back I looked into removing and replacing the nitrogen canister, while I was unscrewing it I noticed it unscrewed in half ! I never knew they were a 2 piece item, anyways the other bit that screws into the attesa pump assembly was super tight so I put it back together 

now that the box is back in I went to bleed the attesa system with fresh Nissan matic d, and I can’t get the pump to prime !

ive disconnected the white plug in drivers kick panel, cracked the bleed nipple on both the pump and near transfer case and it basically just dribbles out without the pump working 

no error codes on attesa ecu 

I started the car and jumped under and cracked the nipple still no luck

fuses are good

i by passed the attesa relay in the boot and the pump worked fine for 10 seconds but then started making a different high pitched squeel 

while the pump was going I jumped under and still nothing from bleed nipples

 

can anyone shed some light on what I can do next 

did me separating the nitrogen canister cause this issue as it was working fine before it came off the road ?

i got a known working attesa ecu and relay from a mates Gtr I will try tomorow and report back

 

any help would be much appreciated !!

 

Edited by SiR_RB
SiR_RB Grand Master

SiR_RB

Posted
  • Author
Posted

So I found the issue 

my pressure sensor next to nitrogen canister had a cut wire, that’s why the attesa ecu wouldn’t turn the pump on as it thiught it had max line pressure

all fixed now and also installed a new nitrogen canister, and full bleed with Nissan matic d

all I can say is 4wd has never worked so well before !!

  • Like 2
  • Thanks 1
Gareth Collaborator

Gareth

Posted
Posted

Out of curiosity how did you get the other part of the canister off the car? I also had the unscrewing in half problem (although i realised before I completely unscrewed it) which i thought would be pretty dangerous if the canister actually had pressure in it, why wouldn't you make it a left hand thread if it had to be 2 piece, anyway I machined up a giant socket to remove the whole thing as one piece

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      My BMW 335i

      By GTSBoy · Posted

      f**kin' yikes! That insulation is the shittest stuff I have ever seen. You need to do an insurance job on that f**ker, pronto. WRT to the washer cover, I would have said that there'd have to be some at a wrecker, then remembered that it's a BMW, and reasoned that every single wrecked one would have been tailgating and so the front end would be trashed.
    • PranK
      My BMW 335i

      By PranK · Posted

      Oh and I lost my headlight washer jet cover!
    • PranK
      My BMW 335i

      By PranK · Posted

      Ok, so I got myself some X1 wheels really cheap to try out, they're a bit different and I like them but they're really narrow (18x8) they are available in staggered 18x8/9 also but really hard to find.  I kinda dig them, but not as much as the F10 19's I usually run, so these go into the wheel pile.         As I mentioned in another thread, I got a new exhaust. It's an off-the-shelf stainless one that fits OH-KAY. I don't love the tips size and how far they come out the back, I think I might cut the tips off and replace with some smaller (~3") ones that don't extend as far. It sounds really good though, I'm not sure if its just in my head but the car feels a little quicker, more responsive.      I fitted an eBay special front lip. Surprisingly it fit perfectly and all holes lined up. Its a little rickety but I haven't put any double sided tape on yet, I want to clean the front bar up where it has scraped the road a lot and fil in the number plate holes (or, get body coloured wrap to cover them - is this a thing?  I'm not sure if I'll leave it gloss or pain it matte. I really like it though, I don't particularly like the front bar without it, I don't really like the M-Sport and to get anything else is just too expensive. That said, I might need a new one now anyway as I dropped the car onto the jack after forgetting to put ramps under the front wheels. It bent a lot and while it did go back to normal after I got the car off the jack, I do fear I have not done it any favours.    Lastly, my headlights died. Different problems in each. They have gotten much dimmer over the past year or so, I put new (uber expensive) OSRAM bulbs in them but to no avail. One of them pointed at the ground and the other just kinda did its own thing with light working sometimes. Yeah, check this 18 year old BMW headlight wire. I reckon I know why they were stuffed.            BTW, the yellow and black is the power to the Xenons. Yikes. I hunted around an researched my options here. I would have loved to just get a replacement harness but not a thing. My car has adaptive headlights, that is they rotate left and right with the steering wheel. Good condition used adaptive xenons were over $700 each, non adaptive were around $400 each, but I couldn't help but think that they're all around 18 years old now, surely they'd have the same problems. So I looked at newer LCI headlights but they were even more expensive and I couldn't confirm that they'd be plug and play with lots of people having lots of opinions so not worth the risk.  I ended up getting brand new Chinese headlights from MARS. They're very close to OEM with only the angel eyes being a bit different. I didnt want crazy turn signals or sharp DRL's or anything. Not my bag.  They're not adaptive, I thought thats a feature I wouldn't really miss. So I coded that out.  The lights are awesome, they look so nice and they take so many years off the car. The angel eyes look great and the headlight brightness is ridiculous. I was so used to the old ones, I didn't realise just how bad they were. The new ones use the OEM bulbs, Xenon ballast and leveller motor which I was happier with. The only issue with them is that the rear cover is held on by SEVEN screws. This will be a nightmare to get to and open when I need to change bulbs.   
    • joshuaho96
      Lets play a game - What is causing my oil consumption?

      By joshuaho96 · Posted

      Now that you mention it I can see those too. More subtle. The lighting and low resolution makes it hard to assess super well what's going on but what is visible is bad enough to pull the motor.
    • Lithium
      Welshys 32ZILA and the 8HP.

      By Lithium · Posted

      I feel like this is due an update
×
×
  • Create New...