Need a Clutch Mid North Coast NSW

[Scottyd 240z]

Hi, I have a 240z with a RB30DE and RB20DET gearbox, I believe my clutch is going ( very little peddle, hard to get into first gear and reverse at idle, selects other gears while driving ok with correct revs ) Ive checked clutch fluid, wound the clutch adjuster out with a small improvement but now I need a pro to inspect. Looking for RB experienced or a good clutch mechanic to check and replace if needed between Newcastle to Coffs Harbour.

[GTSBoy]

How much movement are you getting at the slave piston on a full pedal stroke?  Reason I ask is that failing master cylinder or slave cylinder is just as likely to be the cause as anything else.

[Scottyd 240z]

I recently replaced the Master cylinder, as for movement at the slave piston I’m not sure but will jack it up and check tomorrow. Roughly what is an ecceptable amount of movement.

[GTSBoy]

At about 50s in this video you can see a (Toyota) slave stroking.  They all need to do about the same travel to release the clutch.

https://www.youtube.com/watch?v=p77NuzSraUQ

 

[Scottyd 240z]

Thanks mate.