qld Nissan R33 Skyline 1996 S2 GTS-T RB25 - 600HP BEAST - 60K + Spent - M-Spec - VGC

[kleb420]

 PLEASE REQUEST MORE PICS IF GENUINELY INTERESTED I HAVE  OVER 120 PICS OF THE BUILD + FINISHED PRODUCT

I WILL ALSO ANSWER ANY QUESTION ASAP, WILL BE CHECKING EMAIL CONSTANTLY SO DONT HESITATE

THIS CAR IS ALSO LISTED ON ALL COMMON CARSALE WEBSITES WITH MUCH MORE PICS... Carsales listing has about 65 pics

 

Up for sale is my Pride and joy, an E85 Fueled 1996 M-Spec S2 R33 GTS-T with 145,000kms I have owned her for 4 years and have spent the last 12-18 months transforming the already 596hp beast into my ultimate reliable, easy to drive R33

 ASKING $31999 ONO

VIN: 6U9000ECR33113727

 

I Purchased her with 596hp on E85 and absolutely meticulously cared for... a solid build but it needed a few things. Faulting it were the typical hard to drive brass button clutch, grinding 5th gear, sticky throttle body, a few small tune faults and some minor cosmetic details. ( old steering wheel, no floor mats etc.) I wanted it perfect so I decided to strip it down and change a few things to my liking and as you will see below.. i got a bit carried away with my “quick” teardown and rebuild.

 

Reason for regretful sale is I’m wanting to buy a house.. so its time for my labour of love to be passed on.

 

The car has never been smoked in, it has never been parked outside.. Literally not been parked in the sun more than a hour since I’ve owned it. Never parked in shopping center car parks, never parked in the city, never driven to work etc. has been 100% a weekend car and has been only parked in my dry and safe garage hence the great condition paint, headlight lenses, interior and lack of even a tiny speck of rust or corrosion.

 

The car has been cleaned and washed almost every time its driven (once or twice per fortnight). Has always been maintained with high quality products like Mothers and Meguiar’s 

 

The car has just been tuned at PIT’s by Matty Spry 30/5/2018, regarded as one of the best in the industry to work on a skyline. It made a reliable 599.99HP at the wheels @25PSI

 

It would be fair to assume that every fast car has been built to be driven hard.. but not only has this car had very little Kms since rebuild but it has been very well cared for, I understand the stress that every part in the car Is put under at high boost and have always driven accordingly... it has never been skidded, thrashed or even redlined... the highest RPM the car will ever see under my ownership is by my tuner in a controlled environment, with that in mind Rev limiter is set to 7350 for safety but can obviously be raised if you choose

 

My attitude with this car has always been “Do it right- Do it once” hence the 40k+ of parts used to get up to my standards (on a car that already had a lot spent on it by previous owner – (Probably in the order of 30-40k incl car)

 

Everything I have touched is either already perfect or has been replaced with brand new parts. No stone left unturned, no corners cut.

I have used nothing but the best parts and have spent hundreds of hours researching the best part or best method for the job, only Genuine Nissan or top brand Aftermarket parts have been used – eg. Can get an oil cooler for $100 but I got a $650 Japanese top quality unit, which has fluid pass through twice for extra cooling. Many many things on the car where I have spent MUCH more than necessary just for the peace of mind knowing it is built as strong, as reliable, as functional and as fast as it can be. You can rest assured that you are buying a car that isn’t just built to go fast.. its built to do it comfortably for a long time to come, without issue. You can also rest assured knowing that the person who built this car is a perfectionist who spent a lot of time and thought getting everything right, I don’t just bolt things on I look at every aspect of this particular job and how it interacts with every other part of the car to ensure the whole product at the end.

 

I was once told there is 3 things of importance to car owners and you can only have 2… - Cheap, Fast and Reliable – and I have certainly opted for the latter 2

 

Engine has always been serviced every 2000Kms MAX, oil and filter - gearbox and diff were done every 5000kms (like everything else way over done for peace of mind), has just had brand new clutch, brake, diff, engine, gearbox and power steer fluids 30/5/18

 

Where items are marked NEW they have been a part of the recent rebuild and are all BRAND NEW parts – this process was completed on 4/6/2018 so all these parts have JUST been installed will have very minimal use and KM’s – all other parts were installed previously by either myself or previous owner, (the car has done about 7,000kms total since the previous owner built motor prior to me buying it… including the KMs I have done) so even parts that aren’t brand new have low Kms on them

 

Due to the extent of modifications.. this car cannot be sold with a RWC, it will be de-registered on the day of sale, if purchaser is on gold coast or south brisbane im willing to deliver the car to you and remove plates once in your garage, I can provide details of the RWC certifier that I have always used for this car for an easy re-register

 

$42540 in Receipts + $18000 I paid for the car

Well over $42,000 in receipts (a 2” thick folder full of receipts will be supplied with the car aswell as over 125 pics of progress of the build and finished product - BYO USB), and as anybody who has ever built a car like this would know big ticket receipts are only a fraction of the money that’s been spent on her – also keep in mind I am quoting the prices I paid which is generally way below normal retail price

 

 

Engine:

Rebuild done by Troy at Arundel cylinder heads

NEW $9000 Rebuild on a motor that already had $10k+ in it

Block Decked Plateau Hone and bored

Full Engine Balance and Blueprint

NEW CP Forged Pistons 86.5mm 9.0:1 $1000

Kelford cams

Balanced and plugged crank

Nitto oil pump

Forged Rods

HKS cam gears

NEW ACL Race Bearings $240

NEW All seals rubbers gaskets etc.

NEW Japanese water pump $90

NEW Gates timing kit $250

NEW Tomei cam cap studs $325

ARP Studs

NEW ATI Superdamper harmonic balancer $720

Genuine Greddy Intake Manifold $1000+

1000cc ID injectors

Splitfire coil packs

Vipec ECU – $1800 - Just tuned at 599.99HP by Matty Spry at PITS gold coast - tune alone cost $2650… the two runs on the dyno sheet are at wastegate spring pressure @ 10PSI and 2^nd is with elec boost control @ 25PSI

NEW Raceworks 4 Bar Map sensor $180

NEW Clear Timing Cover $90

Custom Stainless catch can and power steer bottle

Stainless vented coil pack cover

K&N pod air filter

 

Head:

Port and polish on inlet and outlet bowl areas $560

Full head service incl adjust valve spring tensions/throat after putting in larger valves $720

NEW Oversized Stainless exhaust valves $280

NEW Oversized Stainless intake valves $306

NEW Seals $130

NEW MLSR 1.3mm head gasket $30

Large oil drain fitting with 5/8” oil/E85 resistant High temp hose to sump

 

Turbo + Exhaust:

NEW Garrett GTX3582 Vband Turbo With ATP Twin Scroll T4 1.06 AR Housing $3000

NEW Custom Twin Scroll T4 CRG Turbo manifold (chose this because of the amazingly unrestrictive merge collector welding) $1300

NEW Custom 3.5" Stainless Dump + Mid Pipe $1777

NEW Basalt Volcano Wrap on dump pipe – this is the best heat wrap around (75% overlap not minimum 25%) $80

NEW Kakimoto Racing Hyper Full Mega N1 3.5" Full Stainless Cat back Exhaust $1500

Twin Tial 40mm Wastegates

Tial Blow Off Valve

NEW Pro flow stainless braided turbo fittings and hoses $500

NEW High quality stainless T-bar Clamps used throughout boost/intercooler piping $300

NEW all silicone hoses used for boost, BOV, wastegates, boost controller etc, all with stainless worm drive clamps not cable ties

NEW Innovate Wideband O2 sensor in dump pipe

NEW MAC 4 port Electronic boost control $100

Spare exhaust bung located at top of dump pipe, to enable much better tuning

Foil backed fiberglas heat wrapping on Turbo water feed as runs close to exhaust

Oil drain from head and turbo run in specialty 250c oil/e85 resistant smooth bore hose to sump, then sleeved with 500c fiberglass and silicone coated sleeve for superb protection from exhaust

 

 

Cooling:

NEW HPC Ceramic coating on turbo manifold $935

NEW HPC Ceramic coating on turbo exhaust housing $282

M-Spec aftermarket alloy radiator

NEW Mushimoto Dual Pass 25 row oil cooler and genuine braided lines + sandwich plate $650 (LIFETIME WARRANTY)

ARE Large Front mount intercooler

NEW All Radiator\Heater hoses replaced with silicone $100

 

Clutch:

NEW 1000HP NPC 225mm Twin Carbonic Sprung center 5 puck Full Billet clutch $2700 - drives almost like a stock clutch, absolutely miles ahead of the brass button that was on the car when I bought it. Very little noise when pedal is pressed compared to other twin plate clutches.

NEW NPC billet Flywheel (slightly lighter and rotational mass reduced by having most of the weight/mass closest to center)

NEW OEM Nissan slave clutch cylinder $100 (consulted with NPC this is the best slave to suit twin plate clutch)

NEW full fluid flush with Motyl RBF600 fluid $35

 

Gearbox:

NEW Brand new OEM Genuine Nissan 5 speed manual gearbox shipped from Japan $3000

NEW genuine NISMO upgraded Gearbox Mount $150

NEW Nissan throw-out bearing supplied with box

 

Fuel:

NEW Speedflow 40 micron Billet + stainless fuel filter $190

Speedflow fuel regulator

NEW Pro-Flow E85 Teflon lined stainless braided Hose and fittings $800

Plumbing from pumps have been done via 2 separate hardlines and are joined into 1 large braided line at the filter in engine bay.

NEW EFLEX sensor installed ready for tuning on 98 octane through to e85 $100

Custom Stainless Surge tank in boot.

Dual Bosch High flow pumps

Chrome Fuel rail

New 90mm Throttle body and cable $200

NEW genuine Nissan TPS $130

 

Brakes:

NEW DBA T3 4000 series slotted rotors all round $652

NEW Remsa brake pads $150

NEW Brand New professional HPC “HSV red” Brake caliper coating $300

Labour to fully rebuild all brake calipers after being coated (new pistons, seals, clips etc) $530

NEW HEL Braided brake lines all round $180

Motul RBF600 full brake system fluid flush $200 (one of the best brake fluids available)

 

Suspension:

NEW Japanese Wheel bearings all round $ 1000 prefessionally installed

NEW Whiteline adjustable Front and rear sway bars (22mm rear 24mm front) $600

NEW Whiteline Adjustable Swaybar links $300

Labour to install sway bars and adjust pre load $400

Driftworks Coil overs

Car height is perfect balance of looks and performance, not so low its uncomfortable or bumpy around corners etc.

 

Wheels and Tyres:

18" Enkei Rajin Wheels $1600 (very light and strong- look great too)

Hankook Ventus RS3 tyre’s, one of the best street tyre’s, Super sticky in the dry and surprisingly good in the wet. $300+ ea

 Rear: 265/35/18 - Front: 235/40/18

 

Interior:

GTR bucket seats – Very comfy and makes you feel one with the car, no sliding around on corners

Custom Airbrushed Red console + dash facia and drivers door panel (smoke and skulls, nice and subtle though)

NEW Genuine MOMO Hand Stitched Leather Steering Wheel $500 Feels very nice in hands, good grip (made in Italy)

NEW MOMO Quick disconnect Steering wheel Boss

NEW genuine Nismo 5 piece floor mat set $300 (very soft for bare foot driving)

Kenwood Speakers 6" splits in front and 6x9"s in parcel shelf + Amp under passenger seat

Sony touchscreen DVD Player/Stereo with AUX cord

Matching black with red Stitching console armrest, handbrake and gearstick boot, black and red gear knob

All white LED interior lights including blue instrument cluster lights

Tinting

 

 

Gauges:

NEW Depo Japanese Stepper Gauge 4 in 1 "boost, Volt, Oil press, Oil temp" $250

NEW Innovate LC-2 Air Fuel Ratio gauge and wideband $320

 

Battery/ Wiring/ Electronics:

Optima red top $375 (great cranking amps makes cold starts much easier)

Blitz Turbo timer

All wiring has been done neatly and properly (I am an electrician) all joins soldered and all cables wired to ECU have been labeled with non-fade printed labels for easy ID, corrugated tube used to protect cables where needed

When motor was removed I wrapped all engine bay wiring/ looms in foil backed fiberglass heat wrap as an extra precaution

Electric mirrors work well

Sunroof works and seals well

All lights, both interior and exterior work perfectly, as well as all wipers etc.

 

Exterior:

Paint is in great condition, just spent 2 entire days thoroughly polishing and waxing using mothers polish and carnauba wax 4/06/18

Panels are very straight, no dents

Headlights and taillight lenses in great condition, also buffed and waxed

NEW Genuine NISMO clear Side Indicators $70

 

 

Other:

New spare Remote and key $80

Hicas Lock

Mongoose Keyless alarm system and central locking

GPS to phone security tracking system – allows you to track the car on a gps map, can even speak to the driver via car speakers or kill ignition all via your phone (never used it - installed by previous owner)

Dashcam behind rearview mirror

 

Fluids:

Only ever used the Very best in fluids

Engine: Joe Gibbs XP6 Racing Oil $35\L

Gearbox: Redline lightweight Shockproof Gear oil

Brakes+Clutch: Motul RBF600 $60/L

Radiator: Wetter water

Diff: Penrite LSD

 

 

I will be completely honest and list every single fault I can think of on this car… NO SURPRISES:

a small scratch in rear bar – nothing major

the bolt on lip on front bar needs repairing on bottom edge, and paint on bottom of front bar isnt perfect – if you feel necessary

a crack in rear of passenger headlight – has been removed, section sanded, cleaned with alcohol and fully sealed with 2 coats of JB weld (worlds strongest adhesive) – already fixed and sealed fully

a small hole about the diameter of a AAA battery in the passenger seat - is not tearing or spreading

there is some blemishing on drivers side mirror under glass – has not gotten worse in the 4 years ive had her

A small bit of gutter rash on front passenger wheel - easy fixed, not very noticeable

There is a small gear in fan box that needs repairing/replacing, causes a intermittent clicking sound for 5-10 secs when starting sometimes..

Tinting on rear windows isn’t perfect

 

 

if I was to keep the car the next unnecessary things I would be looking at doing are:

spend a few hundred on a really nice gear shift knob

and replace suspension arms with upgraded tubular style ones

new diff, although Nissan LSD’s are great already

but as I said its not needed its just all that’s left unreplaced on the car

 

IT IS ALMOST A BRAND NEW 2018 R33 NISSAN SKYLINE   but better than Nissan ever built, it certainly drives like a brand new car with all drivetrain except diff brand spanking new

 

 

All inspections by either yourself or your mechanic are welcome, please don’t hesitate to ask any questions I will answer them all as best I can – Or don’t hesitate to ask for more pics if interested, i have about 125 pics of car finished, as it was built, And motor internals, head etc as the motor was put together and much more

 

[PranK]

Do you mind me changing the order of your images so I can put this on Facebook? 

[kleb420]

hey Prank

sorry for late reply, was out for dinner after work

could you just clarify what you mean? you just want to put some of my pics on facebook for promo? or as a classified?

yeah i was wanting to change the order but i couldnt seem to work out how to. for some reason the engine pic collages ended up first instead of down the bottom with engine bay shots.. and the engine bay shots got a bit mixed up too.. is that what your wanting to change? if so yeah no problems

ive got no problem with it being put on facebook, just no name and phone number please more than happy for you to have the link to this listing though

thanks

caleb

Edited June 7, 2018 by kleb420

[PranK]

Hi Caleb,

When we share to Facebook, the post takes the first pic in the thread. I was just making sure you were ok with me putting a full car shot at the top.

Thanks

 

[kleb420]

Oh ok yeh no worries mate go for gold.

could you do us a favour and move those 2 collages at the start down to the bottom?

Thanks mate! ?

[kleb420]

[kleb420]

PRICE DROP - $29990 ONO

[kleb420]

YOUTUBE VIDEO

walk around and interior

https://youtu.be/iivGQrvJ2Gs

 

[Gymkhana]

1 hour ago, kleb420 said:

YOUTUBE VIDEO

walk around and interior

https://youtu.be/iivGQrvJ2Gs

 

Won't work?

[kleb420]

thanks mate, didnt realise it was on private should work now

[Robzilla32]

Works now. Car looks great!

[kleb420]

thanks mate, will be sad to see her go

[kleb420]

CAR SOLD