Cam wobble after timing belt

[R33gtsdp]

Replaced my timing belt with a gates kit once all back together I noticed my cams wobbling. Belt isn’t over tightend, everything was lined up properly and isn’t out of time. Not really sure what else to check any ideas?

[Ben C34]

I would suggest the pulley isn't seated correctly. It's not like the actual camshaft bent somehow.

Pull it apart and check.

[R33gtsdp]

What do u mean by pulley not seated. To check am I removing the pulley completely and re installing?

[GTSBoy]

Yuh, you've not put it back together right.

[R33gtsdp]

Yeh I’ve figured that but don’t know what’s done wrong nothing noticeable is wrong and it’s pretty straight forward 

[Ben C34]

I can’t see how you will fix it without pulling it apart first 

[R33gtsdp]

Once I pull it back apart what would u like pictures of or for me to be checking 

[GTSBoy]

Pictures likely won't help.  We're talking about you having it put together ever so slightly cocked or with a spacer or something out of place.  Not the sort of thing that we'll be able to see in your typical F2.4 super wide angle phone cam picture.

[R33gtsdp]

Update it’s the bracket not the actual gear. All bolts in bracket are tight not sure what this means 

[Ben C34]

What’s your plan?

mine would be to check if the bracket is installed correctly. The bolts being tight isn’t enough of a check. 

[R33gtsdp]

What I should of said was I removed the bracket and re installed both dowls weren’t damaged and went on and same result... plan  from now is a find a donnor cas and see if that changes anything other then that I’m cluesless 

[R33gtsdp]

What I should of said was I removed the bracket and re installed both dowls weren’t damaged and went on and same result... plan  from now is a find a donnor cas and see if that changes anything other then that I’m cluesless 

[R33gtsdp]

Fixed- replaced CAS seems it was bent