stagea m35 burnout?

[darksould43]

any idea on how to do a burnout in a 300 rx stagea? it doesnt have traction control or anything but every time i try all the engine does is rev to 2000rpm and nothing else, i hold the brakes just enough to stop the car rolling and try to rev the engine but nothing, what am i doing wrong, i can try chaining it to a pole but id rather not atm

[KiwiRS4T]

Drop in an LS7 or put some bald, skinny tyres on the back.

[Ben C34]

Hahahjaja even a v6 commodore can do a burnout! Hahahhaa 

put an ecotec in it mang

[Leroy Peterson]

Too much grip, needs single pegger like the pros

 

 

[Duncan]

take it to a dealer, swap it for a c34 stagea and you should be fine

[Burger]

Needs more space savers

[Hertz Donut]

On 6/21/2018 at 11:25 PM, Ben C34 said:

Hahahjaja even a v6 commodore can do a burnout! Hahahhaa 

put an ecotec in it mang

^Truth. I took mine to the wrecker a couple of weeks ago and engaged in some private road testing along the way. Smoking a 235/40R18 was ridiculously easy, even with 305,000km of abuse on the clock. Instantly regretted getting rid of it.  

PS: My new Leaf loses traction if I nail it from a standstill. What am I doing wrong? Not enough shopping bags in the boot?

[sideburnie]

Just checking, but you all know about the throttle cut out from the ECU with brakes on right?  NM35 all have that problem due to ECU having a throttle restriction when brakes are on and I think for about 3 seconds after brake release. I would assume PM35 is the same?  Solution is the brake wire cut/switch mod (look for it on forums).  I did mine - very easy to do.  Better option is to get a re-flach of the ECU - some on ebay for NM35 - Nm35 stagea vq25det stage 1 ecu reflash its-rom

  

[Caleb_M35]

Foot-on skids are a no go without the above recommendation. Tip it in while in Tip-Tronic 2nd and have some fun

[darksould43]

On 7/7/2018 at 12:19 PM, sideburnie said:

Just checking, but you all know about the throttle cut out from the ECU with brakes on right?  NM35 all have that problem due to ECU having a throttle restriction when brakes are on and I think for about 3 seconds after brake release. I would assume PM35 is the same?  Solution is the brake wire cut/switch mod (look for it on forums).  I did mine - very easy to do.  Better option is to get a re-flach of the ECU - some on ebay for NM35 - Nm35 stagea vq25det stage 1 ecu reflash its-rom

  

awesome ill give that a go cheers