Chris' R34 GTT Series 2

[hoodedreeper]

My current project car is a '92 Supercharged MX5, I've been building it over the past 5 years but sadly its time to move on. Like most, my dream car is an R34, a GTR will always be out of my price range but I would certainly be happy with a GTT. I'd decided the MX5 would be stripped and sold in September when the insurance expires and then start the search for a clean R34.

I wouldnt be a true car enthusiast if i wasn't already looking for cars on the interweb with this decision in mind. My fingers were starting to hurt after refreshing various selling and auction sites here and Japan too often. 

One car I kept being drawn back to was a white Series 2. It ticked all the boxes for what i was looking for, except it was the facelift front bumper that was preventing me from looking deeper into the details. So i messaged the seller and asked for a few more details and photos, very quick responses and the amount of photos asked on request was overwhelming. 

Was it worth the 7hr round trip to go look at it, to potentially not like it? If it was as clean as it was in the photos, something major must have had been up with it if i was to walk away. Luckily this wasn't the case, infact the car was even better in person. After a test drive and a good poke around i really couldnt fault the car except for a knock on the driver side rear. So with an offer made he accepted and I drove away extremely happy! The 170ish mile drive home was faultless and i look forward to digging in and putting my own stamp on it.

It would have been rude to not get some photos, especially with the MX5

Nissan Skyline R34 GTT Series 2
RB25DET NEO 6
Manual Transmission

Imported in 2016 by IBE Cars in Huddersfield,UK
Resprayed in original Pearl White in 2017

Its stock except for a custom turbo back exhaust, HKS mushroom filter and aftermarket stereo

[hoodedreeper]

The car is booked in next week for a full service inc cambelt,waterpump and all fluids changed,along with a set of Meister R coilovers and alignment

Edited June 30, 2018 by hoodedreeper

[GTSBoy]

Very nice.  Please keep it off the salt.

[V28VX37]

Very tidy, nice find! Have you considered a Series 1 front bar? Heaps easier to fit a front mount behind it.

That MX5 looks like great fun too!

[Dose Pipe Sutututu]

Nice! If you're lucky enough it might have a helical centre at the back!

[Jordy32]

Looks like a tidy example mate, enjoy it!

[hoodedreeper]

On 7/1/2018 at 6:13 AM, V28VX37 said:

Very tidy, nice find! Have you considered a Series 1 front bar? Heaps easier to fit a front mount behind it.

That MX5 looks like great fun too!

I've found an Altia bumper which i'm collecting on Saturday. I wasnt too keen on this bumper at first but I'm starting to like it, ironic that i'm now having to change it for a FMIC

[hoodedreeper]

Got the car back from my local garage, who have done an amazing job on the Skyline the past couple of days

Oil Change
Spark Plugs
Fuel Filter
Japspeed Radiator
Thermostat
Drive Belts
Cambelt & Tensioners
Waterpump
Coolant change
Gearbox Oil change
Diff Oil change
Brake Fluid change

Meister R Zeta CRD Coilovers
Shorter front drop links
Wheel arches and suspension turrets undersealed

A-Tech 17" wheels back from powder coaters (done by SW Wheels) tyres swapped over and fitted along with new wheel nuts

Full alignment

Car drives completely different now and looks awesome!

Got some things coming from Japan aswell as another road trip planned for this weekend. Will keep you updated when i receive them

[vxsr33]

Damn that looks great! So clean aswell. I didnt like the front bumper at first, but now i think it actually looks pretty good.

[Dose Pipe Sutututu]

Do a burn out

looking hot, time for a nice and juicy GTX3582 Gen 2 or EFR8374

[PranK]

Looks awesome, well done!

[hoodedreeper]

Why buy aftermarket clear side repeaters when you can just remove the orange lense yourself for free! 

With the purchase of the Blitz FMIC it was time to find an Altia bumper,this seemed abit more tricky than i first though. Luckily i found one only a couple of hours away, and it was en route on my holiday to Cornwall last week! 

While down in Cornwall we took a trip over to Devon and visited the guys and girls at Torque GT. They had the HKS SSQV Blow off Valve on offer, so would have been rude not to grab one while i was there. I also purchased a speedo converter too, which i'll get booked in with my local garage to get it fitted soon.

With the car now serviced and the cambelt changed, i wanted to record the date like they do over in Japan. So i contacted Rajikaru who supply period correct japanese stickers, and they kindly replicated the sticker for me and have now added it to their store! I also purchased some other stickers to go with it.

We also got both cars out for a drive Sunday evening

[hoodedreeper]

It was busy day today for me and the fiance as we cracked on with doing little jobs on the car. Its those simply, low cost mods that make a little difference overall.

The engine cover got prepped and painted in silver. I was originally going to do it red, but thought it might have been too much, so kept with silver to keep it more factory looking. The text was painted red and i started to draw a black border with a sharpie but it decided to dry up, so that needs finishing at some point

The stock strut brace got a lick of paint too

I also gave the larger areas of the engine bay a quick de-grease along with the fitting of some red dress up bolts 

We also gave the calipers a lick of paint, you may have noticed a colour scheme going on...

 

[hoodedreeper]

My second package from Japan had arrived, my replacement OEM steering wheel. This is fantastic condition compared to the one fitted to the car. The only problem was (and i didnt notice until i took the photos) was its actually from an Auto car, i didn't originally see the buttons in the advert on Yahoo Auctions,oops!

Before

After (before fitting)

Replaced the dash cluster bulbs to LED, photos don't do them justice. Just need to get a front interior light bulb to complete the interior

It was my birthday last Wednesday, my fiance very kindly purchased some LED tail lights and also purchased a personalised number plate along with my parents (i knew about the plates as i found it lol)

Last Sunday i organised a photoshoot with some friends who have japanese cars, here are some of the solo photos i got of the GTT

[Vodkashotx]

Nice to see some GTT love!

Have you slapped that front bar on yet?

[hoodedreeper]

Its been fitted for a couple of weeks, but waiting on some other things to make a worth while update

[hoodedreeper]

Not much has been happening and i didn't want to just post single photos.

Finally got the Altia bumper painted and fitted, along with some clear indicator units and chrome bulbs. Its transformed the front end and looks alot better! I'm glad i decided to colour code the centre bar and not left it black.

The factory ceramic turbo doesn't like a bar of boost, most say around 11-12psi max is safe. After some research i decided to go for a Greddy Profec OLED boost controller to up the current boost a tad. Also hoping it'll come into boost smoother as its a little bit 'choppy'.

I didn't like the mount that's supplied so decided to make something. I started off with making a blank for the ash tray 

I wanted a flush look and have it removable if there was ever a problem or i didn't like it. We recently had some new magnetic phone holders come in at work so I decided to use one for the mount. I cut the ball & socket mounting off and was left with just the magnetic pad.

And stuck the other half of the magnet on the back of the controller

With the hole drilled for the wiring it was ready to be 'test fitted'. I originally fitted a wiring grommet but I didn't take into consideration that it protruded above the surface, so scrapped that idea

To make it secure onto the trim i used two small screws in the top corners. Double sided tape would have made it look cleaner, but I didn't want it coming off while i'm driving.

With it refitted it doesn't look too out of place in the cabin, quite pleased with the result! I've also fitted and wired up the AEM gauges from the MX5. I just need to fit the oil sandwich plate and sensor along with getting a boss welded into the exhaust for the AFR gauge.

[hoodedreeper]

In August I ordered a new set of wheels, I wanted a set of these for the MX5 but they don't make them wide enough in a 15. So i'm very happy to be able to have a set on the Skyline

Choosing a wheel design was difficult enough, let alone deciding which fitment to get. I decided on 18x8.5 ET30 and 18x9.5 ET30, playing it safe due to the arches are original and mint, would be a shame to ruin them because of the offset being lower.

I believe Nismo recommend this fitment for the GTT, so that was some reassurance

Colour choice was also another challenge, the current bronze wheels look awesome against the pearl white and I had my head set on that. But then i saw the GT Silver was an option and well....you can see from the photos that i made the right decision (or did i?)

This is one of the rear wheels to help show the concave, the fronts are alot more straight spoked due to the width

I wont be getting tyres for a couple of months, show seaon is over here in the UK and the car won't be driven much when the salt starts to be spread in the coming months.

[hoodedreeper]

With the bodywork being in mint condition (except the difference in colour on some panels due to the pearl) my attention would be under the bonnet. I can't afford a full forge build,top mount turbo etc so went for a cheaper route. I've been collecting parts for a couple of months and now I'm at a stage where i can post about it.

Stock Turbo Stage 3 Hybrid (spec below) (Rebuilt by Universal Turbos)
Genuine Gasket Set
Apexi Power FC
Z32 MAF
R35 GTR 570cc Injectors
Walbro 255 Fuel Pump
Blitz FMIC
NGK BKR7E Plugs
Splitfire Coilpacks
Competition Clutch Stage 2 (supplied by Conceptua Tuning)
Lightened Flywheel
Braided Clutch line

Re-Profiled Compressor Cover
T38 Compressor Wheel
360 Degree Thrust Bearing
T3 Billet Backplate Modified
T3 Bearing Housing Modified
Hi-Temp Turbine End Piston Ring Seal
T38 Turbine Wheel
Re-Profiled Turbine Housing
Ported Wastegate and Larger Poppet Valve
1 Bar Actuator
Up-Rated Actuator Bracket

My aim is 400hp,would be over the moon if it was more

I also have a Tomei turbo elbow on order through Nengun Performance

[ComTruise]

Looks great man! keen to see the results. One question where did you get the dash LED kit? was it a kit or did you get them separately yourself? keen to know as it looks fantastic.

Edited October 22, 2018 by ComTruise