Jump to content
SAU Community

Recommended Posts

I have a problem that I don't even know where to start diagnosing it.  My R34 GT-Four experiences a strange sensation in the steering where at the same point mid corner when completing > 70 degree turn at speeds higher than 15km\h the steering suddenly gets heavier for half a second and the steering wheel jolts slightly (easily reproduced on smaller roundabouts).  I have read a heap of posts on the effects of hicas problems and power steering assist but the fact I can reproduce the problem consistently I thought it was more a mechanical issue rather than an electrical issue.  The vehicle is insanely low (thanks to the previous owner) does this play havoc with the AWD system and steering?  The vehicle has the standard factory steering wheel.

 

 

Low will not affect anything.

The simple answer is just to disable HICAS* (because of its love of the cawk) and if the problem persists then it is mechanical, in a steering joint.

The longer answer is that it could be either a HICAS problem or a problem with a steering joint (ie, tie rod end, most likely) and I can't see how it could be diagnosed over the 'net unless someone has had and solved the exact same issue.

*By "disable HICAS" I mean a complete HICAS delete kit.

I honestly hoped someone had a similar issue ?.  I have little faith the in local shops diagnosing the issue, due to my past experiences.  I'll give the Hicas removal a go and go on from there.  Thanks for your reply.

Have you ruled out a slipping ps belt? Dry steer it on concrete back and forth in a fast motion to see if you can get it to slip. It will feel like jolting through the wheel accompanied with a heavy steering wheel.

I had the same issue on my R32 GT-R, the power steering would 'kick' randomly, especially while going around roundabouts, fun times. I guess the computer couldn't decide whether to put it in low speed or high speed mode.
I disconnected the smaller plug on the HICAS computer, problem solved. I believe it's a voltage issue with the computer and/or somewhere else.

R34 GT Fours do not come with HICAS. I’d guess it occurs when 4wd gets engaged.
I have a sedan GT4, and my steering changes course pretty weirdly under similar circumstances, I have split radius rod bushes to fix, and I’m replacing the front lower ball joints, to see if that helps. I don’t get any kick or heavy steering in mine though.

I managed to get some time check out the car over the weekend, yes you are correct @dr phil... no Hicas!!  But piddley little S13 size driveshatfs ?.   The PS belt did squeal when I tested by dry steering, so I replaced the PS belt as it did look old and worn.  Dry steering again results in no belt squeal or slip but the random pulling or jerking remains when cornering.

I probably should have looked at the car myself before posting.  TBH this is the first time I've personally had the car in the air and I think it has every adjustable suspension arm that has a pillowball Nengun has to offer - so the problem could be anywhere.  I have ordered some new Tierod ends (had to buy genuine) so  I'll post again once I make some progress.  Thanks for all of your advice.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It's excellent but I'm still breaking it in so I'm not 100% sure where it'll end up. I would say it's about 15% heavier than stock and the smoothness of the slip zone is quite progressive but you need to be a little patient compared to stock or it'll bite hard and stall. Stock I got away with absolutely horrid clutch control. Like I said before I couldn't even tell where the clutch would grab when it was stock so releasing way too quickly without enough revs it would just slip and the revs would drop lower than ideal but that would be the end of it. Currently there's a bit of a nasty clutch judder if I don't apply enough revs + find the exact wrong point of the slip point in the clutch pedal but it feels like it's slowly resolving as I drive it more. I would not recommend the competition clutch unless you really need the extra clamp force. I think this clutch combined with the Nismo operating cylinder is going to be exactly what I want. Enough bite that you need to remember the release point to avoid stalling or rough shifts, but progressive enough that it's not hard to drive by any means and not heavy at all. I tried a "super single" clutch on my friend's 997.2 Turbo 6MT and that was absolutely horrid. It runs an electrohydraulic power steering pump for the clutch power boost so there's zero feedback in the clutch pedal and there was a horrific clutch shudder well after break-in due to the lack of marcel springs or hub springs in the friction disk. It felt like the slip zone was the thickness of a single toe twitch as well so it was almost impossible to avoid stalling it unless you gave it a ton of revs and just dumped the clutch instead of trying to be smooth with it. I was terrified of pulling out in front of traffic. I have also tried some kind of "super single" on an EK9 and that makes this twin plate Coppermix look like a stock clutch. Releasing the clutch pedal even slightly too quickly feels like you're getting rear-ended. The pedal is extremely heavy as well and there's no vacuum assist like the GTR.
    • Yeah, well I was probably way underguessing the $300 figure anyway. Just multiplied a "normal" by 4 for the purposes of pointing out it's not cheap, particularly if it has to be repeated.
    • We have an alignment shop out here that does what you're talking about but he wants like 800 AUD a pop. DIY is "cheaper" but once you start accounting for the value of your time I'm not sure it's worth it.
    • The main catch phrase for any car is "the eye of the beholder", and "personal tastes and preferences" And as for the plastic "flares", I honestly think they look cheap and tacky, and I cannot see them aging well, maybe if they were body colour they might look better to my eyes, but, I would still prefer it the were more like the older WRX STI models that had the wider body metal panels In saying all this 5hit, I wouldn't buy a new WRX again, even if it had the wide body metal panels    
×
×
  • Create New...