Jump to content
SAU Community

Recommended Posts

Hey I own a skyline R34 2000 sedan and i have recently been having trouble with my steering wheel shaking when I reach 100kph.

The car as had 1 alignment done and been balanced twice...neither fixed the problem :/

The left tie rod has been replaced also as that was on its last legs but still didn't fix the problem.

i don't believe it is the tyres as it drives pretty straight without dramatic pull to either side of the road and no obvious wear is noticeable but due to me not being a mechanic in any way, I could be wrong. 

any suggestions on how to fix this problem would be highly appreciated as I am puzzled to what the problem could be.

thank you. 

 

Link to comment
https://www.sau.com.au/forums/topic/474529-steering-wheel-shake-at-100kph/
Share on other sites

Usually when you feel the shake in the wheel, its an unsprung issue (as in, wheel side of the springs, not car side)

sprung weight issues are usually felt through the floor seat and pedals.

So the first thing you need to do is take the car for a drive on a nice smooth road with the radio off, and pay close attention to what you can actually feel, so you can tell an expert clearly.

In my experience what you describe sounds like a wheel or tyre out of balance, possibly  even a wheel bearing (although you would see this immediately when doing an alignment)

Stick your head into the back of the wheel, and see if you can find any evidence of wheel weights not being where they should be.

I would just jack up the car, spin and wobble the wheel. 

All 4 shouldn't take more than 10 minutes.

As for "techs" picking up a issue during a alignment, that's not something I would lay a bet on.

I have lost wheel weights when cleaning the rims, usually because the "techs" just stick it on without any cleaning or prepping the surface.

2 hours ago, mlr said:

 

I have lost wheel weights when cleaning the rims, usually because the "techs" just stick it on without any cleaning or prepping the surface.

Damn right. New wheels, took it back to shop, got rebalanced. Witnessed new weight on there...had fallen off by time i drove home.

On 7/18/2018 at 10:30 AM, mlr said:

I have lost wheel weights when cleaning the rims, usually because the "techs" just stick it on without any cleaning or prepping the surface.

I always remove my wheels and clean them the day before my appointment with the tyre shop... they do notice things like that.

 

 

I paid a tyre shop $200 to adjust the front end of my car to the specs I wanted.

After two hours, the "tech" absolutely fked the front up. I took it home and adjusted it by eye in 10 minutes to bring it to a more driveable state.

Can't pay anyone to do anything any more, unless proven otherwise.

3 hours ago, niZmO_Man said:

I paid a tyre shop $200 to adjust the front end of my car to the specs I wanted.

After two hours, the "tech" absolutely fked the front up. I took it home and adjusted it by eye in 10 minutes to bring it to a more driveable state.

Can't pay anyone to do anything any more, unless proven otherwise.

I use JAX at Liverpool, usually $60 for full alignment to my specs.

Only issue I ever had was the steering wheel was off center once, they fixed it straight away. 

With the laser gear it makes doing an alignment (EDIT: should be) idiot proof.

Hell, I've watched the guys do it so many times I reckon I could give it a crack, it ain't rocket science.

Did you get the problem sorted?

9 times out of 10 a wheel wobble is wheel and tyre related, some tyre shops will be good and tell you if there is a problem, others won't.

Causes can include (but are not limited to)
- Wheels bent
- Old tyres
- Tyres not round (also see: cheap tyres)
- Tyres unevenly worn

Do you have half decent tyres on the car? How old are your tyres? Have you tried rotating wheels front to back? (if a wheel is slightly bent, it's better to have it on the back).

The other 10% of the time as Ravi said it could be related to other parts of the steering/suspension.

On 7/20/2018 at 2:11 PM, mlr said:

I use JAX at Liverpool, usually $60 for full alignment to my specs.

Only issue I ever had was the steering wheel was off center once, they fixed it straight away. 

With the laser gear it makes doing an alignment (EDIT: should be) idiot proof.

Hell, I've watched the guys do it so many times I reckon I could give it a crack, it ain't rocket science.

One day I'll wake up early on Saturday and take my car there. I had a mate get alignment on two of his cars there so good reviews there.
I guess I was ill-informed when I handed over my cash. Lesson learnt.

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sadly I can confirm if you are actually seeking to drift, you will quite easily spin up one wheel. Even if you're going in a straight line. I am not entirely sure of the metrics/terminology here but there's only a certain amount that the helical will actually spin both wheels. I've seen it on video with my own car where two lines of smoke switch over to just one after you really get in to it. Unlike with a clutch diff where you can keep your foot planted until the car regains grip, in my experience with the helical you want to be utilizing traction control allowing LIMITED slip or lifting (partially) when you start to spin up both tyres with a Nissan helical. Which makes them pretty sub optimal for drifting duty. That said... this is probably a helical on numbers alone. Just put the Kazz in
    • Let's just fix the problem by f**king the rest of the gearbox.
    • Unlikely, as per Greg's post. This is not helical diff behaviour unless one wheel is up off the ground. Shimming what? You don't "shim" a mechanical LSD. Probably not in the sense that you have heard of people "shimming" a diff. And the process that Nissan f**kwits call "shimming" a diff involves super-preloading a VLSD cartridge against the side of the diff to create a friction/wear point (in a place that it wasn't supposed to have one) to make the sloppy, useless, viscous diff into a hybrid viscous/mech abortion. In case it isn't clear, I consider the process to be stupid. Nike.
    • How much does the shifter move when the car is in gear with the engine off? If it is more than about 1cm you need to replace your shifter bush. Your shifts will just get crunchier, not faster, with a short shifter unless you also rebuild the whole box
    • I should video mine, will prob do it tomorrow    Between 1st and 3rd, you could fit another two gears. That is how loose and wobbly it is   horrible:(
×
×
  • Create New...