Jump to content
SAU Community

R34 na+turbo conversion

R34 rocket bunny sedan
 Share

Recommended Posts

R34 rocket bunny sedan Rookie

R34 rocket bunny sedan

Posted
Posted (edited)

OK so need some help please people just turbod my na r34 and am checking if what it's doing is OK before my tune on Thursday OK so I'll start with parts I'm running... And post problem last

Rb25de neo 

R33 5speed gearbox conversion 

Was using rb25 one but think was near dead New rb25turbo hasn't arrived yet 

R33 turbo manifold

Gtt injectors 

R32gtst4det fuel pump

Power FC ecu stock gtt base tune atm

Big front mount cooler

Turbo smart bleed valve 

New 3"pipe decat and r32 custom dump

R34na 02sensor

R32gtst4det afm I wired in also tried 34 na one OK so my problem is it misses bad under boost only.. disconnect turbo runs sweet can this be my ign timing when boosting?  Just want it all good and ready for my first tune as never had one what should I get done in the tune and what boost 5? And just get fuel/air and some timing pulled/retard etc...also haven't tried yet as my new turbo is on its way but the one I was using was blowing smoke and whining and no matter what it was stuck on 7-8 psi my hand controller wouldn't turn it down so waste gate? Over boost could've been the problem? 

FB_IMG_1532856222471.jpg

Edited by R34 rocket bunny sedan
Link to comment
https://www.sau.com.au/forums/topic/474642-r34-naturbo-conversion/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • r32-25t
      2025 Osaka Auto Messe

      By r32-25t · Posted

      I’d love to find some where that can recover the dashes to look brand new and original. Mine has a very slight bubble, nothing compared to some I’ve seen though 
    • Rezz
      2025 Osaka Auto Messe

      By Rezz · Posted

      $170K. I asked one of the guys there as a joke if that price was just for the passenger seat as it was where the price sheet was... he tried really hard to crack a smile 😄 He also mentioned that every single part of the car was inspected and either restored or replaced with a new or as new part, or made from scratch. The interior was incredible, every inch like a new car.
    • Dose Pipe Sutututu
      R32gtr sputtering and stalling

      By Dose Pipe Sutututu · Posted

      Time for a modernisation, throw out the AFM, stock O2s, ECU into the e-waste bin. Rip out the cable throttle, IACV, pedal, etc. into the scrap metal bin. DBW, e-throttle, modern ECU, CANbus wideband, and the thing will drive better than when it left the factory.
    • MBS206
      R32gtr sputtering and stalling

      By MBS206 · Posted

      I agree, don't go trusting those trims. As I said, first step is to put the logger away, and do the basics in diagnosis.   I spend plenty of time with data loggers. I also spend plenty of time teaching "technicians" why they need to stop using their data loggers, and learn real diagnostics.   The amount of data logs I play with would probably blow most people away. I don't just use it to diagnose. I log raw CAN data too, as a nice chunk of my job is reverse engineering what automotive manufacturers are doing.
    • joshuaho96
      R32gtr sputtering and stalling

      By joshuaho96 · Posted

      I'm aware, but unless you're actually seeing the voltage the ECU is seeing and you're able to verify the sensors are actually working I find it hard to just trust STFT/LTFT. I will say, logging the ECU comes naturally to me because it's one of the lowest effort methods of diagnosis and I do similar things in my day job all the time. Staring at 20+ charts looking for something that isn't quite right isn't for everyone. NDS1 allows you to log almost everything so that's normally what I do and then sort out the data later. 
×
×
  • Create New...