Jump to content
SAU Community

Recommended Posts

Hello Genies,
I need help,

I have an r33 RB25det series 2 Manual.
After driving for 30 minutes the car begins to stutter hard unless i feather the throttle real soft will feel like it's missing.
If I floor it in neutral it bounces from 3k revs up to 4k and won't hit redline. Feels like the engine is rocking a bit but that's probably because I am trying to rev the balls off it 
When driving once it hits 3 k revs the car will start bouncing back and forwards hard and a popping noise will come from the exhaust like it's running rich. This will happen under any moderate or hard acceleration.

If I turn the car off and turn it back on a few minutes later the problem is fixed and the car will run great for the next couple of minutes then the popping and stuttering will resume.

The car drives great when it hasn't been driving for over 30 minutes will hit redline.

I have new NGK iridium plugs -11
And New Osaka Coil Packs which has helped it stutter less
I have re soldered and cleaned the MAF
I ran the ECU got code 33, Heated Oxygen Sensor, I cleaned it put back in. Code hasn't come back also running without o2 still won't rev up

Rescanned got code 44 for ECCS working correctly.


 

Link to comment
https://www.sau.com.au/forums/topic/474647-rb25det-popping-and-shaking/
Share on other sites

Hey thanks for ur guys replys i tried check fuel pump pressure but couldn't figure out how to do it, 

Car is fully stock pulled out the sparkplugs have yellow on the tips and the metal screw in part it black, gave them all a clean with break cleaner the stutter persists 

They only have about 1500 kms on them 

 

57 minutes ago, NzPeasant said:

Hey am going for a car scan on Friday to diagnose the problem, I will get back and let everyone know what the problem is in case anyone else has this problem thx

Do that ! Where are you taking it as a matter of interest?

Not a bad idea will tee in a fuel pressure guage Ty

Also taking it to a random mechanic shop in Auckland that said they could scan obd1 lol 

Will let u guys know the results 

Vid attached is me flooring car in neutral revved to 4k the first time I did it 

i have a feeling i have a similar issue...with my case my sound just turns into a gruggling sound after 30minutes but the car idle's at perfect 1.1k rpm. The meters are still find, the whiteband reading fine. I don't know...
Some say that i am using water and no antifreeze coolant, causing things to become hot in the radiator and cause bubble. Some say its the thermostat and some say its a blown headgasket.
I know it's not the sparkplugs because i gave the car a service 10days ago with fresh v-power 7 sparkplugs, oil and oilfilter

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...