Jump to content
SAU Community

FS: Link Plus Ecu - Unused

Spressy
 Share

Recommended Posts

Spressy Apprentice

Spressy

Posted
Posted

note: I am advertising this on behalf of someone else

FOR SALE: Link Plus ECU in unused condition

This ECU suits twin cam RB heads and is plug-in.

What you will receive:

  • USB data cable
  • Wiring Loom
  • MAP Sensor
  • Water temp sensor
  • Adapter box
  • Air temp sensor
  • Installation manual
  • The ECU itself

Some capabilities of this ECU:

  • Variable fuel pump speed and relay control
  • Interfaces with engine coolant temperature, fuel temperature and intake air temperature
  • Boost control solenoid compatibility
  • Variable Valve Timing control
  • A/C fan control
  • Launch Control
  • Advanced fuel injector control
  • Intercooler water spray, vehicle speed and shift light capability, there are too many features to list here!

$2,500 Or Best Offer, Located in Bendigo, Victoria

Please don't hesitate to enquire for more information or pictures, the seller can be reached on the following phone number: 0417 513 871

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      R34 GTT air noise?

      By joshuaho96 · Posted

      Wastegate stuck open will make the exhaust louder because the turbine is being bypassed but it will not make a sucking noise. It will affect idle but not enough to cause issues. Only way for that to be an issue is if the wastegate actuator rod is so loose that exhaust is leaking out from it. Exhaust leaks are usually not that complicated to spot otherwise. Any leak will be magnified by exhaust visibly leaving soot or heat damage to gaskets, external surfaces of cracks, etc. Make sure the BOV is not stuck open. If this is running stock ECU/your tune is not speed density get rid of the atmospheric vent and do 100% recirculation. A boost leak test would show if you had a problem there. You can also try capping the throttle body and only pressurizing the intake manifold to see where pressure is leaking out. With the engine off the only path for it to leak out should be the intake valves.   
    • JC71
      R34 GTT air noise?

      By JC71 · Posted

      I will go over it again, a leak would make the most sense and also explain why I have a high idle issue if I plug the iacv in...I have had everything off, inspected, and replaced every coupler and hose in question, new clamps, reinstalled and basically soaked the entire system with soapy water and find nothing... could there possible be an issue with the wastegate rusted open?? from sitting so long? again the air sound literally sounds like a 3 inch open pipe blowing or sucking air, not just a small passage, very strange. it does sound like the turbo is creating massive air flow but like its not being diverted or flowing into the intake/cylinders, it seems to have very low and delayed power. do appreciate the help
    • GTSBoy
      R34 GTT air noise?

      By GTSBoy · Posted

      Boost leak or exhaust leak. Boost could be from anywhere, including manifold/plenum gaskets. Exhaust is frequently head to manifold gasket or from manifold to turbo gasket. Often caused by missing nuts or broken studs.
    • GTSBoy
      Wheel offset has me confused.

      By GTSBoy · Posted

      Check for spacers on the front, in case they've been pushed out a little to try to match he rears better.
    • IXMandalorianXI
      Wheel offset has me confused.

      By IXMandalorianXI · Posted

      I should clarify that the previous owner put the wheels on, so Im not entirely sure what he bought. I was searching the Rota page and found these two as the only matches. It did not occur to me that perhaps they sell these wheels with different offsets. I guess the best way to solve this is to take the wheels off and measure them from the inside to be sure.
×
×
  • Create New...