Jump to content
SAU Community

BBS RS 261

caynemoar

By caynemoar,
in Wanted to Buy

 Share

Recommended Posts

caynemoar Rookie

caynemoar

Posted
Posted

Hello all,

I am chasing bbs rs 261 (9 x 17 - 20). I have one that i have purchased and am now looking for another 3. Hoping someone has one two or three laying around so i can complete my set. Condition does not have to be great as they will be restored. So long as there is no damage to the faces themselves. Gutter rash shouldn't be an issue. Waffle plates and hex caps are not a must. Just the basic rim. Of course ill pay for shipping, preference to the rims being located eastern side of Australia.  Im located Regional NSW.. have searched the auctions, gummie and everything else consistently for the last few months.

Thanks

bbs rs 2.jpg

bbs rs.jpg

Link to comment
https://www.sau.com.au/forums/topic/474878-bbs-rs-261/
Share on other sites
chalon Rising Star

chalon

Posted
Posted

I have a set of 4 with one that's cracked and needs repair, but other 3 are good.  Some light gutter rash.

 

PM me your phone number and I'll send some pics.

 

Located in Adelaide.

 

Thanks

Link to comment
https://www.sau.com.au/forums/topic/474878-bbs-rs-261/#findComment-7885042
Share on other sites
  • 7 months later...
  • 2 weeks later...
  • 7 months later...
  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Dose Pipe Sutututu
      RB25 S2 Idles but doesn't want to rev

      By Dose Pipe Sutututu · Posted

      I would sell those side feeds before you hydra-lock a motor. I won't say too much about Yellow Jackets because I'll hurt people's feelings, however ask those that tune RBs day in/out what they think of them.
    • Trilbyte
      RB25 S2 Idles but doesn't want to rev

      By Trilbyte · Posted

      The 1000ccs are side feeds but they're not currently installed, had my old factory ones in for leak testing purposes, only decided on them because front facing plenums and good top feed rail kits are out of my budget at the moment, are they really that problematic? Had a set of yellow jackets that lasted me 5 years, no real issues, only replaced them chasing this misfire issue that ended up not being ignition related 😄  
    • Dose Pipe Sutututu
      RB25 S2 Idles but doesn't want to rev

      By Dose Pipe Sutututu · Posted

      Are those 1000cc side feeds? If so, that's part of your problem. I have 1480cc and they idle at stoich on 98RON, and all the way to E85. Also your coil packs.....
    • Trilbyte
      RB25 S2 Idles but doesn't want to rev

      By Trilbyte · Posted

      Update for the sake of closure   Ended up getting the intercooler piping all sorted, new plugs and yellow jacket coils, and she was idling mint until it warmed up while I was bleeding the cooling system. Found the misfire to be localised to cyl 3 by unplugging coilpacks, ran a compression test, that checked out, then decided to get a mate to check if that spark plug was firing out of the motor. Upon cranking it over, with the injectors disconnected, the car actually fired and ran on a couple cylinders and heaps of fuel came out the top of cyl 3 I'd say that injector's either spraying incorrectly or spraying far too much, which is fine as I'm planning on replacing them anyway I'm planning on making about 250kW on flex fuel, and have a set of 1000cc injectors from ozautosport, obviously overkill but I'm planning on building the motor and running more boost further down the line, do you reckon they'd be too big for a smooth idle on 98? Thanks for the replies gents, much appreciated
    • Dose Pipe Sutututu
      Any feedback on GReddy Turbine Kit T620Z in r33 GTST/RB25DET?

      By Dose Pipe Sutututu · Posted

      Nice modern Hypergear high flow would be perfect.
×
×
  • Create New...