ABS ecu consult software

[Ljbyrne98]

So I have a 1998 Nissan with a 14 pin consult port. 

I have a problem with my ABS system and wanted to do a diagnosis to find out what the issue is but I cant find a software that supports it. I know NDSII supports ABS but this is the the 16 pin rather than the 14 pin that I require. 

If anyone could point me in the right direction that would be super duper helpful

TIA

[GTSBoy]

I don't think anyone has done anything for any CU other than the ECU.  Your best bet is just to take it to a mechanic who has a proper scan tool.  Snap-on and all the other good brands can see these other CUs and interrogate them.  I've done it on R32 TCU, HICAS.

[niZmO_Man]

That Snap On tool is very good, but also very pricey

[GTSBoy]

Hence why I tell people to go to a real workshop when they need to do these things - because workshops who rely on interrogating CUs to find out what is wrong are the only ones that can afford the kit to do it.

[dr phil]

Off topic but I wrote some software to connect to the ABS/ETS computer in my R34 GT4, via consult port.

Are you sure you can’t put the ABS in diagnosis mode by connecting some pins? You need a workshop manual for details. You can do this on R34 for example, it flashes error codes on the brake warning light on the dash, similar to engine ecu diagnostic mode.