Jump to content
SAU Community

Recommended Posts

23 minutes ago, ERO54N said:

Hello Raefalot,

Mine flash when I lock or unlock using remote.

How come?

Mine are not flashing but no idea why and I wasn’t sure if they were meant to or not.

what model is yours and do you have any alarm or aftermarket central locking installed that might be doing the flashing or is it stock?

It's how your remote has been programmed. Are you using a stock remote or aftermarket? 

Most remotes will change how the lights/sounds are triggered by programming the remote. 

Try holding the lock and unlock buttons together for 3 seconds to trigger lights off and on again during unlocking/locking. 

Let us know how you go.

Cheers.

 

12 hours ago, Robocop2310 said:

It's how your remote has been programmed. Are you using a stock remote or aftermarket? 

Most remotes will change how the lights/sounds are triggered by programming the remote. 

Try holding the lock and unlock buttons together for 3 seconds to trigger lights off and on again during unlocking/locking. 

Let us know how you go.

Cheers.

 

Hey thanks,

its stock remote, no alarm or anything aftermarket.

i think I did try that but nothing changed.

ill try it again, just waiting for the car to get back from the workshop.

cheers

Edited by Raefalot
3 hours ago, Raefalot said:

Hey thanks,

its stock remote, no alarm or anything aftermarket.

i think I did try that but nothing changed.

ill try it again, just waiting for the car to get back from the workshop.

cheers

No worries mate. Try a few combos with the buttons like holding lock/unlock together for 5 seconds then just lock and then separately just unlock for 5 seconds and then try unlocking to see if it's turned back on. 

Otherwise, try resetting the remote. Besides that call Nissan and get them check it out. 

Good luck.

On 10/8/2018 at 6:33 PM, Raefalot said:

Hmm, tried all the combos and resetting the remote using the instructions in the workshop manual but still no flas haha.

any other ideas?

Hey mate, tried this - unplug your battery and leave it off for 30 minutes or so to reset the car. May act as a hard reboot and the central locking resets back to stock settings. Probably won't do anything but nothing to lose. 

Good luck.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey, yeah I really like the color. Only paint I'd rather have is KN6, but those are expensive. Right now I'm trying to get the car to the point where I can get it tuned to 370hp so the whole setup can be driven legally, and pass the next inspection that is already due anyway. Beyond that lots of rust fixing I'm afraid, winter project is most likely going to be a front end teardown and fixing the strut tower rust. I know these can be driven daily but I don't think I will do so anytime soon. Will post a build thread soon with a list of issues and futute plans.   Cheers
    • Wanted to reply to this topic. I'm in the somewhat same boat with our Stagea. I'm trying to install a different rear diff. The Stagea/Skyline uses mounts on top of the rear diff for the ATTESA pump. Any way you can relocate the pump? I did find this kit https://theskylineshed.com/products/nissan-oem-attesa-mounting-kit-to-suit-r32-r33-r34
    • So here's the deal, my wife picked up an S2 AWD Stagea. Super cool, clean car. Looks like the owner in Japan went track spec as it's got some heavy modifications including Exedy twin disk, tension rods, coilovers, GTR brakes, oil cooler & a Nismo 2 way rear diff. Now, cool mods for sure. But, she is just using this as a casual daily driver. The 2 way rear is AGGRESSIVE. It also has solid subframe bushings & poly diff bushings. So that doesn't help either. So far I've tried changing the diff fluid to the correct fluid. Even tried a little friction modifier. No help. This thing clunks, skips the tires & has some slight whine/NVH when driving. Might sound like I'm being picky, but just trying to find a better solution. Here in the states, it's impossible to find a Stagea rear diff. No luck. I do have a 300zx non-turbo diff. Same ratio, 5 bolt axles. On the Stagea, you need both front & rear diff ratios to match. This car is a 4.083. I'd like to just swap a normal rear diff into this thing. Nothing fancy. Even open diff is fine. She's not tracking the car LOL The difference is that the ATTESA pump mounts to the top of the rear diff. There are 3 total mounting points for the pump on top of the diff. With all this being said, what would be the best way to go about this? I could remove the Stagea diff & see if I could get somebody to possibly weld the 3 tabs/mounting points onto the 300zx diff so we could mount the pump on the 300zx diff. I could swap the internals from the 300zx into the Stagea diff but this is not in my comfort zone. Is it possible to mount the ATTESA pump to the underside of the car? Sorry for the paragraph. Just trying to figure out how to go about this. Any help is much appreciated! Stagea Differential - Note two top tabs, one bolt hole for ATTESA pump mounting   300zx Diff - No mounting tabs Also found this mounting kit ?? https://theskylineshed.com/products/nissan-oem-attesa-mounting-kit-to-suit-r32-r33-r34  
    • Not ready yet, but maybe later in the year?
×
×
  • Create New...