Jump to content
SAU Community

Help! R34 gtt manual converted running rough

TaylorS

By TaylorS,
in General Maintenance

 Share

Recommended Posts

TaylorS Contributor

TaylorS

Posted
Posted

Hey everyone. I just got a manual conversion done on my 1998 r34 gtt and now it is running funny. It revs very slow and goes slower then my na r34 now. It is still running the auto ecu. Im thinking that might be the problem? Or maybe the coils? Please anyone that has had this kind of problem let me know.

Ps. Sorry if this is in the wrong part of the forums 

GTSBoy Grand Master

GTSBoy

Posted
Posted

Auto ECU will not be the problem.  The only difference between auto and manual ECUs (apart from slight differences in mapping) are that the auto ECU also contains the TCU.  Oh, and the idle ignition timing is 20° in autos, not 15° like in manuals.

There could be the usual million explanations.  From coils, to dirty AFM or faulty wiring.  Perhaps you need to do a diagnostic on the ECU and looks for codes.

  • Thanks 1
TaylorS Contributor

TaylorS

Posted
  • Author
Posted (edited)
1 hour ago, GTSBoy said:

Auto ECU will not be the problem.  The only difference between auto and manual ECUs (apart from slight differences in mapping) are that the auto ECU also contains the TCU.  Oh, and the idle ignition timing is 20° in autos, not 15° like in manuals.

There could be the usual million explanations.  From coils, to dirty AFM or faulty wiring.  Perhaps you need to do a diagnostic on the ECU and looks for codes.

Ok thanks mate i will give the diagnostic tool ago and see what it finds when i get home. The car seemed to run fine before it was converted. If the car was running fine before could it still be the coils? 

Also the car has no aftermarket mods except a hks catback

Edited by TaylorS
GTSBoy Grand Master

GTSBoy

Posted
Posted

The logical source of problems would be wiring that was f**ked up during the conversion.  The driver's side engine bay loom that services the plugs on the transmission is an example of a place that you need to make changes.

Coils much less likely to die except by pure coincidence.  AFM wiring, oxy sensor, knock sensors are all more likely to be abused during work in the engine bay.

  • Thanks 1
TaylorS Contributor

TaylorS

Posted
  • Author
Posted
10 minutes ago, GTSBoy said:

The logical source of problems would be wiring that was f**ked up during the conversion.  The driver's side engine bay loom that services the plugs on the transmission is an example of a place that you need to make changes.

Coils much less likely to die except by pure coincidence.  AFM wiring, oxy sensor, knock sensors are all more likely to be abused during work in the engine bay.

Ok thanks for the tip mate. It wasn't me who did the conversion, i got it done from a shop so i really hope its not the wiring because i wouldn't know what to do then because the shop isnt sure why its like that either.

I will charge the coils anyway and will put some spitfires in. 

I should also add that at random points in the higher rpm it seems to kick in and then drops back out again.

Sorry for all the questions and stuff

Robocop2310 Experienced

Robocop2310

Posted
Posted
3 minutes ago, TaylorS said:

Thanks for the tips mate, i will check that out too 

All good mate.

Also as some have suggested plug in a cable and run some diagnostics if possible.

Could also be the exhaust too check piping.

  • Thanks 1
Robocop2310 Experienced

Robocop2310

Posted
Posted
4 hours ago, TaylorS said:

Ok definitely will try that tomorrow. Do you think it could be a boost leak causing all this?

Yes definitely a possibility but jack the car up and check exhaust piping ang turbo gasket first followed by hoses and blow off valve leakage.

  • Thanks 1
DatsunBanana Enthusiast

DatsunBanana

Posted
Posted

Couple of times I've had the circlip on the turbo actuator arm fall off and the actuator disconnect. First time it was on a CA18DET and ran absolutely gutless. It's also happened on my RB25DE (with turbo conversion) but wasn't as bad cos the compression is higher so just felt like it was running non-turbo again.

  • Thanks 1
TaylorS Contributor

TaylorS

Posted
  • Author
Posted
12 minutes ago, DatsunBanana said:

Couple of times I've had the circlip on the turbo actuator arm fall off and the actuator disconnect. First time it was on a CA18DET and ran absolutely gutless. It's also happened on my RB25DE (with turbo conversion) but wasn't as bad cos the compression is higher so just felt like it was running non-turbo again.

Thank you for that, i will check that out as well. It could be anything at thid point haha. It does run guttless so it could be that

TaylorS Contributor

TaylorS

Posted
  • Author
Posted

Update: hey everyone i was playing around with the car and i think i have narrowed the problem down to a turbo issue. it seems like i am getting no boost. the boost gauge reads all the way up the top of the gauge at max and i can hear the turbo spalling  but it feels like im getting none of it?
does anyone know what could be wrong from that kind of an issue? is the bov broken?

thank you

  • 2 weeks later...
TaylorS Contributor

TaylorS

Posted
  • Author
Posted

hey everyone i have a few updates.
To begin with i totally forgot to mention that the A/T light has been since the conversion. is this normal? 
i also checked for error codes and it came up with error 34 which is knock sensors. does this have to do with the A/T light?
thank you in advance  

iruvyouskyrine Grand Master

iruvyouskyrine

Posted
Posted

knock sensors have nothing to do with the AT light.

If you arent making any boost but your turbo is still making all the woosh sounds them im going to say you have a massive air leak or there is a rag in your intercooler piping.

  • Thanks 1
TaylorS Contributor

TaylorS

Posted
  • Author
Posted
1 hour ago, iruvyouskyrine said:

knock sensors have nothing to do with the AT light.

If you arent making any boost but your turbo is still making all the woosh sounds them im going to say you have a massive air leak or there is a rag in your intercooler piping.

Ok thank you mate, i didnt think the knock sensors have anything to do with the AT light. 

Yes your right the turbo is still making all of its noises but it doesnt want to boost.  I will have to check out the intercooler next.

Also can the knock sensors casue the car to get no boost? Maybe trigger a safe mode or something?

Robocop2310 Experienced

Robocop2310

Posted
Posted
6 hours ago, TaylorS said:

Ok thank you mate, i didnt think the knock sensors have anything to do with the AT light. 

Yes your right the turbo is still making all of its noises but it doesnt want to boost.  I will have to check out the intercooler next.

Also can the knock sensors casue the car to get no boost? Maybe trigger a safe mode or something?

Whilst you’re get it check your AFM and wiring/tubing to your air intake and intercooler.

  • Thanks 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      MLR's Bogan cruise ship

      By MBS206 · Posted

      So you're now accepting offers of 10% more than the cost of the turbo kit fitted?
    • The Bogan
      MLR's Bogan cruise ship

      By The Bogan · Posted

      No......not yet Minister for War and Finances has stated that the Commodore has to go first Not that I am going to modify the NC any more than what it is already modified now.....
    • drifter17a
      Alpha omega racing bracket

      By drifter17a · Posted

      Thanks again, really helpful chap from alpha omega wanted to speak to me, little concerned if this is meant to he aero alloy/ airospace quality and car sitting on drive has caused this.  Airplane are subject to much more changing temp and conditions than road salts! My caliper, many other components much older have surface rust but never eating part of the metal   Had I not seen it , could have been a disaster! specifically on rear part of bracket coming off like biscuit will update on what they say, helpful people so far
    • MBS206
      MLR's Bogan cruise ship

      By MBS206 · Posted

      January or Feb is it booked in for turbo fitment?
    • The Bogan
      MLR's Bogan cruise ship

      By The Bogan · Posted

      The MX5 has had some annoying rattles in both front doors over bumps So I installed fancy pants door bushings, which stopped all of the rattles with the windows up, but........with the windows down there was still rattles, so after some googling,  and a chat with MX5 Mania, I got some new door to glass weather seals, all the rattles, windows up, or down, are gone now Shout out to MX5 Mania, the weather seals were on sale, and when I head to Dural to pick the up they even fitted them for me for free I did see a "really" nice Blue NA sitting out front   and this Black NC PRHT that looked like it has sat in the sun for its whole life and never had a wash, the clear coat was non-existent, an it looked horrible, really horrible, but, it had a nice turbo kit with over 200kw, the thing went like a cut snake, bagging the rears through the gears and dosing like a champ 😍 But, as I've always stated, I am keeping my NC na, I'm happy with the current power the car makes In other news: MX5 Mania do a drive in drive out turbo kit, the only minor additional part recommended for boosting my car, as it sits now, is a oil cooler, and that bonnet vents are definitely required for track use Aftermarket version look a bit to "racecar" spec I wonder how Focus RS bonnet vents would look?????
×
×
  • Create New...