Jump to content
SAU Community

Recommended Posts

My r33 has been playing up over the last month will sometimes be extremely distorted when driving gets worse going over bumps sometimes but plays up whether I’m driving or not then goes away and is perfectly clear sounding. Not sure where to start in diagnosing but I’ve made sure everything is plugged in to the amp and back of head unit but yeh any ideas where to start or what to test?

 

has pioneer head unit and amp 

Link to comment
https://www.sau.com.au/forums/topic/475242-distorted-sound-sometimes/
Share on other sites

58 minutes ago, R33gtsdp said:

My r33 has been playing up over the last month will sometimes be extremely distorted when driving gets worse going over bumps sometimes but plays up whether I’m driving or not then goes away and is perfectly clear sounding. Not sure where to start in diagnosing but I’ve made sure everything is plugged in to the amp and back of head unit but yeh any ideas where to start or what to test?

 

has pioneer head unit and amp 

Check for voltage leaks or your positive and earth wiring not being properly connected due to a worn out wire or something become loose.

I had a similar property webt to Jaycar to buy proper end clamps and securely reconnected my speaker/sub/amp wiring and it now works perfectly.

Another possible cause is one of your speakers have been damaged or worn out causing extra load on other speakers hence the distortion.

Suggest you set aside some time to check everything then reconnect properly.

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'd argue the F50 kit I got is very good value. For ~2k I got the calipers (refurbed condition), adapters, pads, brake lines, rotors, and top hats. I think you'd be pretty hard to get Evo/GTR/350z brembos + the additional hardware for similar money. Used market for a pair of front calipers alone I've seen tend to run anywhere from $1500-2000 depending on condition.    That said, something like a GTR or 350z brembo is a lot easier to adapt to the Silvia. 
    • Is there a significant price difference between the Evo/gtr/350z brembos vs the F50? Looks amazing.
    • I was actually being a tightarse at the time LOL... My OCD is tickling me into running a 2nd 8AN Teflon hose all the way down and removing the 2x OEM hardlines. My other side of my brain is telling me to run 2x hardlines front to back (also acts as a fuel cooler, so win win).
    • As I mentioned in an earlier post, I had some trouble with the Silvia's brakes dragging back in 2023. I managed to sort it out then, but the same problem came back to bite me late last year. Just take a look at the picture – I had a feeling the handbrake was acting up again, and I was right. Anyway, I'd been wanting to upgrade to bigger brakes for a while. Not that the Silvia's brakes were bad, but it was more of a "want" than a "need", you know? It was funny, though – at the time, I couldn't find any Evo Brembos, 350Z Brembos, or GTR Brembos for a decent price (of course, tons of them popped up online after I already bought my kit!). I ended up going with an F50 Brembo kit, which came with adapters, brake lines, 330mm rotors, and top hats. The F50 Brembo caliper was used in a few other cars too, like the FPV. I also decided this was the perfect opportunity to ditch the Silvia's ridiculous rear brakes and that awful handbrake (some of you were definitely right about that!). I picked up some R33 calipers and all the necessary bits – rear drums, backing plates, and new hardware to refurbish the calipers. Of course, it wouldn't be a project without a few hiccups. Turns out the brake master cylinder was playing up and basically (to put it simply) keeping the brakes engaged. I had it overhauled, and after some adjustments, everything was working again. The whole process took a while, as you can imagine. To top it off, the front right wheel bearings were shot and needed replacing too. This is a rare occasion where I'm posting an update while it's all still fresh! These pictures were taken just this afternoon.
    • I was just going to say that it's good to see you picking up the pace again. Hope the surgery goes well. More downtime just means more time to come up with new ways of digging a deeper rabbithole  
×
×
  • Create New...