Jump to content
SAU Community

Recommended Posts

  On 21/11/2018 at 11:14 PM, niZmO_Man said:
Hey there are a couple of different part numbers between the two [emoji14]
Wheels and decals.
  On 21/11/2018 at 12:35 AM, Steve85 said:

I read good things about the original TRD Avalons, and I thought they looked pretty good too. These ones... i'm not a fan. This type of tuning seems to be the new entry level norm. I'm thinking C43 AMG etc. 

Also I think we are entering another phase of overdone styling. The amount of plastic manufacturers are putting on their cars is starting to bug me. I think 18 year old me would have liked these, 30 year old me says no.

And I'm still angry they slapped an RZ badge on a Camry. ?

Expand  

35 year old me hates both! ?

  On 24/11/2018 at 7:38 AM, Robocop2310 said:
35 year old me hates both! ?
What is your money no object car? I can't pick you... [emoji23]
  On 24/11/2018 at 7:40 AM, Steve85 said:

What is your money no object car? I can't pick you... emoji23.png

Expand  

My money is...it’s a freaken Camry. Mums and grannies drove them and they last forever so stop trying to make them race spec cars! 

That’s what I meant. The Camry never was and never will turn into a race car. My uncle has a Camry Sportivo that he thinks is a special race version Camry! 

  On 21/11/2018 at 11:14 PM, PranK said:
  On 21/11/2018 at 11:14 PM, niZmO_Man said:
Hey there are a couple of different part numbers between the two emoji14.png
Expand  

Wheels and decals.

Expand  

Like my 86, or is it a BRZ, there's more Subi named bits than the couple of Toyota ones.

On topic

I would rather the Totota to any Holden or Ford if I was looking for a family sedan.

They are roomy, comfy and reliable, not bad on fuel either, and after sales service is brilliant compared to most manufacturers.

What other 4 door family hacks are people comparing it to?

As for the TRD badge, who cares, alot of manufacturers are doing it, Subaru throw on STI badges on non wrx cars for some rims and some...badges, BMW do the same with M, hell, even Mercedes are throwing on AMG badges on their big arse 4wd's.

NISMO > https://www.caranddriver.com/nissan/sentra-nismo

18tdigb-helios310c.jpg.ximg.s_12_h.smart.jpg

Car sales have been slumping hard since the mid 2000's...a lot of auto makers such as Nissan and Mitsubishi just to name a few have come close to bankruptcy in recent times so it's no wonder they are desperate to do whatever it takes to sell more cars...if slapping their Tuning House's badge on a car with some minor mods does it!



  On 25/11/2018 at 7:54 AM, Robocop2310 said:
Car sales have been slumping hard since the mid 2000's...


Which car manufacturers? All of them? In what country?
  • Haha 1
  On 25/11/2018 at 9:30 PM, Leroy Peterson said:


Which car manufacturers? All of them? In what country?

 

Expand  

Good question!

Australian Annual New Car Sales, 2008-2017

Top sales by manufacture:

Top 10 Manufacturers by year, 2014-2017

https://www.carsguide.com.au/car-advice/australian-car-market-car-sales-statistics-and-figures-70982

  • Like 1
  • Thanks 1
  • Haha 1
  On 25/11/2018 at 9:30 PM, Leroy Peterson said:


 

 


Which car manufacturers? All of them? In what country?

 

Expand  

As mentioned Nissan and Mitsubishi etc in the mid 2000’s globally.

 

  On 25/11/2018 at 9:57 PM, Robocop2310 said:

As mentioned Nissan and Mitsubishi etc in the mid 2000’s globally.

 

Expand  

mid 2000's were a tough period for lots of industry but its looking pretty healthy these days.

  • Like 1
  On 25/11/2018 at 11:43 PM, PranK said:

mid 2000's were a tough period for lots of industry but its looking pretty healthy these days.

Expand  

Yep for sure much better than the mid 2000's.

Toyota/Lexus design language has been getting progressively more stupid.  Same with Honda (Civic in particular).  Massive wafflebox black plastic that looks like air flow path but is actually closed.  Ugly Predator mouths on the front and rear.  I scraped a hire Camry's front bumper on the lower left side because it is at least 150mm wider down there than it needs to be.  But having made that complaint, the rest of the car's design isn't vile.  The shapes involved in the bonnet, wheel openings, the style lines (such as they are) down the sides, are a whole lot less immature and stupid than most Korean an Euro-trash models at the moment.  And when I say "less immature and stupid" - that Camry actually looks good in all those areas.

  • Like 1
  On 30/11/2018 at 12:12 AM, GTSBoy said:

Toyota/Lexus design language has been getting progressively more stupid.  Same with Honda (Civic in particular).  Massive wafflebox black plastic that looks like air flow path but is actually closed.  Ugly Predator mouths on the front and rear.  I scraped a hire Camry's front bumper on the lower left side because it is at least 150mm wider down there than it needs to be.  But having made that complaint, the rest of the car's design isn't vile.  The shapes involved in the bonnet, wheel openings, the style lines (such as they are) down the sides, are a whole lot less immature and stupid than most Korean an Euro-trash models at the moment.  And when I say "less immature and stupid" - that Camry actually looks good in all those areas.

Expand  

We agree for once but I support your view.

Styling in the Hondas, Toyotas and KIAs have in recent times become too "space-shippy" and round for my taste. Like the most recent Honda Civic Type-R, like what the fark? At least this Camry "looks OK" and hasn't gone off the rails too much. Performance wise, as the guys from TRD said themselves in the video - "it's really racey" without mentioning the specs. Fark, my Kluger is "racey" too my wife picking up the kids from school too...

  On 29/11/2018 at 11:42 PM, niZmO_Man said:

That front bumper, so rubbish. Who signed it off? Looks worse than Mirai.

Expand  

It's not pretty true, but there's much worst out there. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
    • Turn up your speakers https://youtu.be/5_GK5ChNjOs?feature=shared
    • This thing did a 1:20.88 at Winton on the weekend which is f**king rapid.  Well done mate, your driving has really gone up a few notches not much left on the table now! Good luck at WTAC.   https://www.facebook.com/share/r/1MHyZQBqZ2/  
    • Are you guys meeting up with the Sydney SAU guys at Lambton Pool Carpark or heading straight in?
×
×
  • Create New...