Jump to content
SAU Community

Recommended Posts

I'm in the market for an RS260 and hoping you guys could shed some light on general upkeep costs just to make sure I haven't made some crazy underestimation.  No track work or anything for me, just driving around normally.  Wasn't expecting major issues but sounds like everybody on here is blowing their engines, are you guys doing this on purpose?

Link to comment
https://www.sau.com.au/forums/topic/475537-upkeep-costs/
Share on other sites

I'm in the market for an RS260 and hoping you guys could shed some light on general upkeep costs just to make sure I haven't made some crazy underestimation.  No track work or anything for me, just driving around normally.  Wasn't expecting major issues but sounds like everybody on here is blowing their engines, are you guys doing this on purpose?
Not everyone blows up their engines...

If you keep them stock ish and don't drive like a lunatic, you shouldn't have too much trouble.

Fluids, minor repairs/issues, tires etc aren't all that expensive.
It's when you turn them up or abusing them, that's when things can get expensive.

What are you budgeting for exactly?
Link to comment
https://www.sau.com.au/forums/topic/475537-upkeep-costs/#findComment-7893082
Share on other sites

14 hours ago, Steve85 said:

Not everyone blows up their engines...

If you keep them stock ish and don't drive like a lunatic, you shouldn't have too much trouble.

Fluids, minor repairs/issues, tires etc aren't all that expensive.
It's when you turn them up or abusing them, that's when things can get expensive.

What are you budgeting for exactly?

Well just on the lookout for if I would expect many major issues running as stock.  It's for a weekender sort of thing but I need to keep it running, can put aside a bit of money for this on top of 'normal' maintenance but I also don't want it constantly holding me hostage.  I'd always thought these were reasonably reliable if cared for, but they are getting pretty old now.

Link to comment
https://www.sau.com.au/forums/topic/475537-upkeep-costs/#findComment-7893145
Share on other sites

8 minutes ago, motoring said:

Well just on the lookout for if I would expect many major issues running as stock.  It's for a weekender sort of thing but I need to keep it running, can put aside a bit of money for this on top of 'normal' maintenance but I also don't want it constantly holding me hostage.  I'd always thought these were reasonably reliable if cared for, but they are getting pretty old now.

If your keeping it stock, i think you'll be ok. 
It's going to be dependent on the quality of the car you buy, and how you treat it, but realistically a good example won't need any crazy repairs. (Very dependent).

Some of the electronics that are in the car can fail (G-Sensor for example), but a Skyline/GTR workshop should know about some of the more likely culprits should anything go wrong. 

As with all "Enthusiast" vehicles there are things that will cost a little more than your average, but you shouldn't be looking at any serious trouble. Just be prepared for any failure to be slightly complex and for the workshop to potentially charge you a little more in labour than your average corolla to repair things. 

Link to comment
https://www.sau.com.au/forums/topic/475537-upkeep-costs/#findComment-7893147
Share on other sites

17 minutes ago, Steve85 said:

If your keeping it stock, i think you'll be ok. 
It's going to be dependent on the quality of the car you buy, and how you treat it, but realistically a good example won't need any crazy repairs. (Very dependent).

Some of the electronics that are in the car can fail (G-Sensor for example), but a Skyline/GTR workshop should know about some of the more likely culprits should anything go wrong. 

As with all "Enthusiast" vehicles there are things that will cost a little more than your average, but you shouldn't be looking at any serious trouble. Just be prepared for any failure to be slightly complex and for the workshop to potentially charge you a little more in labour than your average corolla to repair things. 

Yeah nice all sounds relatively standard.  Would only be buying a quality example and can absorb a bit of bad luck, worth a go, will just have to see if I can actually find one.

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/475537-upkeep-costs/#findComment-7893157
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I just got to work and skimmed through 61508 and 61511. I was surprised the CSA adopted both, but neither are enforced. To recap what I read, it states that in a perfect world, they should be segregated but they acknowledge that this is not industry standard and clearly mention that they allow mixing of safety and non-safety. 61511 also mentions software segregation like AB does in their safety PLC's.   Now if only I could go back to control, let alone safety over comms. In my current line of work, we're only allowed monitoring and basic control over comms. Everything critical must still be hard wired as much as possible. 
    • I've unfortunately never been as they're on the complete other side of the continent and another country that isn't currently letting us in as easily as they use to. I even heard their stop signs over there actually say "Stop" instead of "Arret". If I decided to trek the 48h drive, I wouldn't know when or where to stop haha. Whenever I order parts from UP Garage, I order from Japan as it's cheaper. Same with GKTech... oddly enough, it's cheaper shipped from Australia then it is the US.  UP Garage Japan operates their US leg though, unlike Tomei. If Tomei JPN had the power to close down Tomei USA, I'm sure it would be done in a day. They're two completely separate entities. Tomei JPN messed up somewhere originally agreeing to its creation and got sacked big time. 
    • I asked someone about this and he told me about the Audi 1.8T engine. But I think it would be difficult to swap
    • I don't know that machine specifically, but I'd personally go for something with a little more kick than 130amp. Around up to 180 would be good. At the 6mm range, you're really pushing the machine hard and don't have a long period you can run for with out needing to give it a rest. Lots of MIG machines come with a regulator and hose. A lot will come with a starter roll of wire too, but it isn't too expensive to buy. I'd recommend NOT buying a massive roll too, as you don't want it sitting around FOREVER in the machine between uses and potentially going to shit. For thin sheet metal, get a roll of 0.6mm if you're doing over 3mm and above, switch over to 0.8mm wire. Even by 2mm you'd probably really want to switch. As for gas battle, it's all swap and go style now. You'll pay a bottle deposit, and then X amount to swap for a full one. I think it's like $200 or $300 for a D Size bottle upfront as "deposit", and like $110 to $150 per swap. My D size CO2/argon bottle lasts a fair bit of welding on the MIG. And I run an E size bottle on the TIG. For DIY MIG, stick with a D size bottle. If you really start to get into a LOT of welding and doing it really regularly, then upgrade. If you're like most DIY car guys, one D bottle will last you 2 or 3 years easily. I think I've been on my current bottle about 5 years. It is starting to get low, but I've been smashing it a lot more the last 6 months.
    • SR20s came with cars like the Bluebird and Primera, but the RB20 never came. The ones in Turkey were either brought in specially or from abroad. That's why RBs aren't as common as SRs. And if a part breaks or I need to replace it when doing maintenance, it's harder to find parts for RBs.
×
×
  • Create New...