Jump to content
SAU Community

Recommended Posts

Ok so I'll attach the video I just took and see what you all think it is. It's started probably about a week ago. My 34 currently has 216,000 km on it, fully stock apart from pod filter and boost controller running 12 psi, and yeah it's just an annoying ticking sound. Not super noticeable when driving unless you really listen for it, but when near something parked up, or next to a car, the noise echoes against it, and it's really blood annoying. In the vid just listen for the constant tick noise that goes up with the RPMs. Just trying to figure out what it is, how to fix it, and if it's urgent. So far with a little bit of research on YouTube trying to match the sound, I've found it could be lifters or timing belt pulley/ idler

 

https://youtu.be/w_6_NSCjT4I

Link to comment
https://www.sau.com.au/forums/topic/475550-r34-ticking-noise-neo-engine/
Share on other sites

Can't tell if it's mechanical or an exhaust manifold leak from the video.  Use a hose as a stethoscope to listen around the exhaust manifold and turbo gaskets.  If not there, use same hose, or a screwdriver as stethoscope to listen around cam covers, timing cover, etc, to see if you can localise it.  It could be worn tappets causing valve noise, or it could be your VCT solenoid or belt tensioner up the shit, or a number of other random possibilities.

So just got a screw driver and went on the vct solenoid and all that good stuff, couldn't hear the noise. Went on the right side rocker cover, could hear it, left side slightly but not a lot at all. The closer to the front of the engine I went, the louder it was. The cas was the loudest I could get it. So I'm guessing it's something timing related? Perhaps could be one of the timing pulleys? Not sure if tightening it would do anything though. Another possibility if it's internal, could be oil viscosity maybe? With the KM's its got, I'm running 10W50, did the service last weekend

Taking it off, it needs to be back in the exact same location doesn't it? If it's put back slightly different, what would the outcome be? Would the cams just smack against the rocker cover? 

Cams can't smack on the rocker cover.  That's not possible.  They rotate through 360° in there as normal business.  The actual risk of taking the timing arrangement apart and not putting it back together correctly is that you will strike open valves with rising pistons and trash at least part of the motor.  This is not to be contemplated if you do not know how to keep it all together in the right places as you take it apart and put it back together.

I wasn't talking about thoroughly dismantling the timing arrangement though.  Just about pulling the CAS off (and then maybe the upper timing cover too for a better look).  And yes, the CAS needs to go back exactly where it came from, or you need a timing light to be able to reset it.

I recently took the CAS off, marked my timing cover, got the new one, marked that up (It is a clear one), and put it in. The timing belt looked in pretty good condition, so I decided not to change it. The ticking didn't start anywhere near after doing any of that, so couldn't have been that. If I were to take it off, what would I be looking for?

Ok, I took off the CAS. The bearing is making a noise when spinning it. louder than most bearings that I've heard. I took it off, lubricated and cleaned it, and the noise actually stopped for a bit. Then it started up again after about 20 mins of driving. Might try take it off again and properly lubricate it and give it another clean, see if that does anything. Not willing to buy another CAS as they're going for around $800

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Major thread necro but how bad of a job is it to DIY? Looking at it online it looks like if you reuse your ring and pinion as long as those are in good condition it should be fine to just pull the axles/front cover and replace the diff that way? Or should I be replacing everything and doing preload measurements/gear mesh testing like the factory service manual mentions for the rear diff?
    • in my list I had the R33 GTR as the best Skyline. Infact I had all GTR's (33>34=32), the NSX, the GTO, the 300ZX, the 180SX, the S15 better than the FD RX7. I had the MR2 and the A80 as 'just' better. I also think the DC5R Integra looks better but this is an 01 onwards car. I also think the FC>FD. It's almost like aesthetics are individual! The elements @GTSBoy likes about the FD and dislikes about the 180 are inverse in my eyes. I hate the rear end of the FD and it's weird tail lights that are bulbous and remind me of early hyundai excels. They are not striking, nor iconic, nor retro cool. The GTO has supercar proportions. I maintain these look much better in person (like the NSX) especially with nice wheels and suspension which is mandatory for all cars pretty much. Some (or all) of these you have to see in person to appreciate. You can't write a car off until you see one in the flesh IMO. Like most people we probably just like/dislike cars which represent certain eras of design or design styles in general. I also think the 60's Jag E type looks HORRIBLE, literally disgusting, and the 2000GT is nothing to write home about. FWIW I don't think the Dodge Viper Gen1's have aged very well either. You can probably see where I rate bubbly coupes like the FD. I know we're straying now but the C4 and C5 absolutely murder the Viper in the looks department as time goes on, for my eyes. Wouldn't surprise me if people who love the FD, also love the MX5, Dodge Viper, Jag E Type, etc etc.
    • I used to hate R31s, and any of the other Nissans that led up to it, and any of the Toyotas with similar styling, because of the boxiness. They were, and remain, childish, simplistic, and generally awful. I appreciate R31s a lot more now, but only the JDM 2 door. The ADM 4 door (and any other 4 door, even if they are unique compared to our local one) can eat a bowl of dicks. The Aussie R31 is also forever tarnished by their association with stereotypical bong clutching Aussie R31 owners of the 90s and early 2000s. I think the Nissans of the 70s (other than 120Y/180B/200B) are far superior looking to the 80s cars. The 240K era Skylines are boss. The same is broadly true of Toyotas. Hondas don't ever register in my thinking, from any era. Mitsus are all horrid shitboxen in any era, and so also don't register. Subarus are always awful, ditto. Daihatsus and Suzukis also don't generally register. They are all invisible. I think the SW20 MR2 looks fiddly. The 3000GT/GTO is like that but way worse. Too many silly plastic barnacles and fiddly gimmicks ruined what could have been a really nice base shape. Kinda-sorta looks like a big heavy ST165 Celica coupe (and I'm not sure if that's a good thing or a bad thing). I think the 180SX is dreadfully bland. It's not bad looking. But it has no excitement to it at all. It's just a liftback coupe thing with no interest in its lines, and bad graphical elements (ie wide expanses of taillight plastic on the rear garnish). The S13 Silvia is a little better - getting closer to R32 shapes. But still....bland. S14? Nope. Don't love it. S15...a little better. Probably a lot better, actually. Benefits from not being like a shrunk in the wash R34 (where the S13 was a shrunk in the wash R32 and the S14 looked like a Pulsar or something else from the stable on Nissan mid 90s horrors). The Z32 was hot as f**k when it came out but hasn't aged as well as the A80. Keep in mind that I think the R33 is the most disgusting looking thing - and out of all the previous cars mentioned is objectively closest to my precious R32. It's just....real bad, almost everywhere you look. And that is down to the majority of what was designed in the 90s being shit. All Nissans from that era look like shit. Most other brands ditto. In that context, the FD absolutely stands out as being by far the best looking car, for reasons already discussed. Going behind the aesthetics, the suspension alone makes it better than almost any other car.  
    • If they just called it the "Mazda Tiffany", it would have been spot on.
    • Yup but for me its the HR ! Cut my teeth on the old holden 6s in the day ! And here's me thinking in the day it was also the 300ZX and the Mitsubishi GT3000 ! All, as well had good lines, but always seemed to need finishing off, style wise.
×
×
  • Create New...