Jump to content
SAU Community

How to clean carbon build up on rear bar?

alex182

By alex182,
in Exterior & Interior Styling

 Share

Recommended Posts

alex182 Mentor

alex182

Posted
Posted (edited)

Car has been running rich since previous owner, and had to gap the spark plugs down further to try and iron out a slight misfire.

Possibly compounded by an ancient muffler, car gets a visible carbon build up on the rear bar after a single drive. I do my best to get as much off as possible in every wash but it's slowly built up pretty bad.

Clay bar is marginal at best, but the soot does come off if I (lightly and carefully) scratch it with my nail.

Can anyone recommend anything that might help get it off easily with some elbow grease?

Would like to avoid anything abrasive as I'm pretty precious about my paint.

Thanks in advance :)

48091486_2227591944175968_7881115394449080320_n.thumb.jpg.5dd4a9c5aed18828b9a3dd02a905a6db.jpg

Edited by alex182
alex182 Mentor

alex182

Posted
  • Author
Posted

Cheers @GTSBoy

Never used Kerosene on the car, so might be a silly question: would you mix Kero in with the wash bucket, or just straight onto a rag? 

Yeah, it's probably due for another wax, didn't even think that might be cause for the recent build up, thanks!

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • mtopxsecret6
      Drivers R32 GTR seat

      By mtopxsecret6 · Posted

      Hi everyone, just looking to see what's available in the GTR seat options, testing the waters on what's available. Wanting a driver's seat to replace my old school OG jap race seat, going to re-register the car so need a factory seat. Prices currently seem to go from $300 to $2k for a driver's seat. What's options are there, that's good condition and actually a realistic price? Located Brisbane. Thanks
    • mtopxsecret6
      AP Engineering Power Fc for RB20DET

      By mtopxsecret6 · Posted

      Are these a plug and play setup, and do they need a tune, like a haltech ecu etc? Thanks
    • Milkmun
      MLR's Bogan cruise ship

      By Milkmun · Posted

      Nice work on the paint. Those 3 studs are long as. 
    • mtopxsecret6
      WTB R32 2door interior parts

      By mtopxsecret6 · Posted

      Hi everyone, still chasing a bunch of this stuff. Thanks
    • robbo_rb180
      Rob's S Chassis track cars. Now with more s15 and less 180sx

      By robbo_rb180 · Posted

      Been over 2 months since I have done anything on the S15 and had a day off today so got stuck into mounting the radiator and intercooler. I ended up using factory bottom mounts as bolted in and I did order some gktech top brackets but didn't work with the PWR radiator so made up some with aluminium flat bar. Spent way to long on them but pretty happy how they are. Next job was the intercooler. Used some more aluminium flat bar and did the bottom mounts first. Top was easy as just one long piece and 2 90 degree coming off rad support and welded them on. The bumper support required some notching to let the outlets sit where I want so will add some reinforcement later to strengthen it. I have also bought ecu and waiting for it to arrive. Went with a Link g4x Xtreme but will be adding a ptmotorsport expander to add a few extra inputs over CAN. Went through a few different configurations on pclink to get what I want to allow future expansion for sensors and gearbox upgrades. Ordered gktech rear arms but looking at the hardrace lower control arms to have some extra adjustment too will see how the alignment looks after first setup. Got 2 more weeks of work before shut down and will have almost 4 weeks to work on this so planning on hopefully firing up mid January.   Also bought a 2015 brz with a heap of good gear, did noosa hill climb a month back. Owned it for 3 days changed alignment and sent it. Finished the weekend 2nd in class and only .3 off the 180sx best time last year. MCA Red coilovers, gktech rear lca, bolt on lock kit and tie rods, whiteline toe arms, cusco 1.5way diff and 4.5 ratio, endless brake pads, headers, exhaust, perrin intake and e85 tune. Electronic steering adjustment, nankang crs with koya wheels 17x9 +35. Have bought rear traction arm and relocation kit, extended studs and v3 tie rod kit. Planning on also getting flex tune as lucky to get 300km a tank with e85 and short ratio. Car is a heap of fun to drive and super easy to work on. AC in the line up at Noosa was mint in 35degree weather.
×
×
  • Create New...