R34 idle control motor hose help!

[34-GOKU]

Hi everyone,

 

My r34 gt-t ended up with a crack in one of the hoses that comes off the idle control motor. (has previously been braised)

Is there any chance someone out there has any info on where i can source this part?

The mechanic told me none available australia and 6-8 week wait from Japan (if instock)

 

If there is any help, would be greatly appreciated.

[GTSBoy]

A little more clarity is required.

1. When you say "braised", I assume you don't mean "cooked in its own juices".  I assume you mean "brazed", as in "welded".

2. When you say "brazed", I assume you don't mean that a hose has been welded.  Are you talking about a metal pipe?  (ie, not a hose).

If you need to replace it, but can't find one, then another repair is almost inevitable.  Just get it welded up by someone who knows what they're doing.

If you need to try to find one brand new....good luck.  Perhaps Amayama or Kudos or one of the other stockists of NOS have one or can find one for you.  Wouldn't hold my breath though.

Otherwise......2nd hand from a wreckers.  There have to be plenty of Neo inlet manifolds sitting on shelves from busted motors.