Jump to content
SAU Community

What's this little box??

Tailz94

By Tailz94,
in Car Audio & Electrical

 Share

Recommended Posts

Tailz94 Apprentice

Tailz94

Posted
Posted

So I found a blown tube fuse under the dash , hooked the wires together and heard sizzling so I disconnected it before finding out what it does, do I just pull the wiring and leave this box out or what ? I don't know what it does and these wires lead to under the centre console and behind the fuse box which mean hell of a mission to pull out all the wiring , I pulled back blue tape in first photo and found these switches, any ideas?? Car is not turboIMG_20181215_170832.jpegIMG_20181215_170315.jpeg

Link to comment
https://www.sau.com.au/forums/topic/475627-whats-this-little-box/
Share on other sites
Tailz94 Apprentice

Tailz94

Posted
  • Author
Posted
Is it clipped onto the under dash trim?  If it were an R32, I would say it was the beeper.
hey mate , nah she was screwed in , checked my black one and it didn't have it so I've pulled it out, was hooked up to horn, and aerial control switch , and also tapped into a couple of fuses behind the fuse box, have removed it and seem to not have any issues so far
GTofuS-T Grand Master

GTofuS-T

Posted
Posted

Those switches are usually linked to some sort of transponder, the switch arrangement being the code set on both the receiver and sender, could it be part of an immobilizer system? which admittedly it doesn't seem secure enough for... my reference is seeing these on RC toys and their remotes.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • PLYNX
      Short shifter r34

      By PLYNX · Posted

      Don't do it if your gearbox box has already having syncro issues. The short hifter will put a greater load on them. If you must I remember Nismo did a shorter shifter, with the top part being physically shorter and the part that went into the gearbox was the same as stock. In saying that I've had a C's short shifter (I think) in mine for many years, which was given to me as the previous owner was not sympathetic to the gearbox. Thus forwarned I was careful and had to modify my normal changing style. You have to be super accurate with your clutch and shifts
    • CRSKmD
      R32 Sedan - Grip and Drift (have my cake and eat it too build)

      By CRSKmD · Posted

      Well, after a week of daily driving and having to crawl out between the wheel and the side intrusion bars. I got myself a quick release setup. I went with an NRG short hub and Quick Release with some cute heart cutouts on the pull tabs. Nice and matchy matchy with the rest of the interior accents I have going on.  The only downside is the total stack height even with the short adapter is longer than the old HKB boss kit. Luckily I had some adjustment left on the column so move the wheel away.
    • robbo_rb180
      Short shifter r34

      By robbo_rb180 · Posted

      stock shifter with new bushes, springs and cup will improve it. Gktech do all the bits. The opinion as the years have gone on is the redline is not great in old gearboxes.
    • drifter17a
      Short shifter r34

      By drifter17a · Posted

      Hi all   what short shifter do you use on your skykine r34?   my synchronous does have a problem and i was getting huge delay and grinding sound between 2nd and 3rd, did put shockproof red heavy stuff and it is great now/ no issues   would in your view short shifter screw this up?   people seems to suggest/ use cube short shifter and there is standard and premium. Seen review of premium as much better and less play. Thoughts?
    • GTSBoy
      R34 oil and timing belt change

      By GTSBoy · Posted

      Yeah, there's a bit of a density and friability difference between pebbles and any of those other things. Silicone will definitely float in oil and so will be mobile enough to move around. Although, again, if it is upstream of the filter it really shouldn't go any further. I would only ever worry about silicone when it is in places downstream of the filter. Upstream of the pickup is a whole 'nother matter. We've all seen what that does. I have seen the most abominable crap settled out in industrial gearboxes, trunnion lube systems and the like, without any sign that any of it has touched anything in the machine. Just chilling in the bottom, waiting for the inevitable operator error that causes the whole machine to need to be dismantled for repairs.
×
×
  • Create New...