Jump to content
SAU Community

Recommended Posts

I have done a fair bit of research on this topic, I just want to ask a few questions because it wasn't clear in the threads I read. 

Basic options for a R33 is to: 

  • Weld/Shim the VLSD (both making the diff 100% locked, the shims don't act the same way as they do in clutch type LSD as they space the spider gears closer together locking them up).
  • Swap R34/S15 helical diff centre into my R33 GTST housing, question being do the half shafts have the same spline as the 5x1? As I know the s15 have 3x2 half shafts. 
  • Spend big dollars on a aftermarket locker, about $1800 at least. Is there any cheaper option, I've heard the ATS LSD diff is cheaper about $800 clutch type but can only find it for front diff on r33 gtr.
  • Swap 350z lsd diff in - Would the 5x1 v35 diff go straight in with the conversion spacers from gktech or do you need to change out the axles?

Is there any other options I am missing? I don't really want to spend $1800 on a aftermarket looker, I have a s15 helical lined up for $300 that looks to be in good condition. Not sure if r33 half shafts with fit s15 helical centre though. Is there much involved with fitting a 350z diff in with the axle shafts?

Link to comment
https://www.sau.com.au/forums/topic/475723-r33-skyline-diff-options/
Share on other sites

I have fitted a S15 hlsd diff centre into my R34 vlsd, everything fits internally but as mentioned the S15 has 3x2 output shafts and the R34 viscous lsd 5x1 shafts do not fit. I had to buy new output shafts for a R34 helical diff which was fitted on later models for the 5x1 output shafts. I used the S15 crown and pinion gears as well for the 3.69 ratio so I had to re-shim to get the pre-load and backlash set correctly. In the end it all worked out but was costly and time consuming.

  On 05/01/2019 at 7:27 PM, NZ-GTT said:

I have fitted a S15 hlsd diff centre into my R34 vlsd, everything fits internally but as mentioned the S15 has 3x2 output shafts and the R34 viscous lsd 5x1 shafts do not fit. I had to buy new output shafts for a R34 helical diff which was fitted on later models for the 5x1 output shafts. I used the S15 crown and pinion gears as well for the 3.69 ratio so I had to re-shim to get the pre-load and backlash set correctly. In the end it all worked out but was costly and time consuming.

Expand  

I would have thought the slightly taller final drive a bonus...does it suit your needs?

Why are you looking at changing the diff?

Nismo do a sweet 2way diff, 4.08 ratio and no stress, just take yours out and put the new one in and your done. Never have to worry about your diff again. 

 

PS it even comes in ABS model

Edited by WR33KD
Can’t spell to save my life
  On 08/01/2019 at 8:57 AM, steve200b said:

I have the 350z diff in my car the inner cv’s from the 350z will fit your r33 driveshafts. That way you get the 6x1 stub axels and the std vlsd has not pegged up at all.

Expand  

That's cool.  I didn't know the CVs would transfer to the older shafts.  Opens up a whole world of possibilities.

  On 17/01/2019 at 6:11 AM, iruvyouskyrine said:

The 350Z has 6x1 stub axles yeah? You would still need GTR 6x1 driveshafts though wouldn't you? Or am i confusing something here?

Expand  

Yuh, you are confusing it/yourself.  I initially read Steve's post the same way you have.  Stop and read it again.  Imagine pulling the inner CV joint off your R3x axle and throwing it over your shoulder.  Do the same to a 350Z driveshaft but toss the shaft and keep the CV joint, and then jam the 350Z CV onto the end of the R3x axle shaft.  Et voila, you have gotten rid of a CV that has 5x1 bolts and replaced it with a CV that has 6x1 bolts, on the same axle shaft that you always had in the car.  Now this axle will connect to a diff that has 6x1 flanges.

  • Like 2

396A_004.png

 

Is it 39654+A or 39600DA? This is relevant to my interests as i have a 350Z diff at home and was considering changing to a CD009 gearbox that i also have and R200's are hard to get in good ratios to suit the 6 speed.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nice. I'm looking forward to the updates!
    • Ayooo, been a while mates. I have a s2 r33 gtst and air stopped coming out of all the top vents.   My car has always made an actuator gear noise when turning the car on but that's a different issue I think? Did searches and am at process of thinking it's an actuator or some type of motor? I see a few different actuators and don't know which one. Would be nice to know if it was the one that's under the steering wheel so the dash doesn't need to come out.
    • Hi, just checking. Did you get this stuff made by Vspec Performance and at what price roughly? Looking into (sometime later) also getting such a intake kit, and Trust as well as HKS don't make a full set like this anymore.
    • 2025 Update PRP RB30 Black and Crank Shipped from Austrailia made it and was sent off to the machine shop. -700 to 800hp Service was done to the Block, which included: Inspection Prep and Black Brace to convert engine to 4wd oil Pan  Crank Fully prepped for 1000hp PRP RB30 timing belt kit w/ ALL options Nitto Pistons Nitto I-Beam Rods Nitto Oil Pump New OEM Nissan RB26 Cylinder Head Shipped Supertech intake and exhaust Valves over-sized Kelford 272 cams Mild Lift Nitto Headgasket All of the machine work is completed and next step is assembly and dropping in the new motor.   Upgrades (Changes) from the previous build: Engine Management - no longer using ECUMasters. Haltech Platinum Pro Turbo - Went from twin HKS 2530s with upgraded wheels to BW362SX-E Fuel - 1000cc injectors to ID1430x Single in tank Walbro 450 to Radium External Surge Tank w/ 2x Walbro 450s     I am looking to be back on the road by the end of summer. Wish me luck! monthly updates should be coming!    
    • Realised I never posted this , also I never got a price 
×
×
  • Create New...