qld R33/R34 performance items, some brand new! GkTech, Tein, Apexi, Nismo

[hardsteppa]

Welcome. Welcome one welcome all - to partz for sells. Can post auswide, pm for costs.

First - Nismo adjustable fuel pressure regulator. Fairly new, and in good working order. I know this for fact, cos i'm still currently using it, but won't fit my new fuel rail so...

$100. 

 

GK Tech poly subframe bushes. These are BRAND NEW - didn't even make it to the garage, and are still in the box. Bought them to address roll centre correction but achieved the same by cutting the top off the whiteline bushes I already had installed so didn't use these. My loss, yo gain. Fits a number of vehicles; details here on the GK Tech website - https://au.gktech.com/polyurethane-rear-subframe-bushes

$110.

 

Apexi SAFC NEO. In excellent working order and worked well for me, but now have a standalone ecu. In good working order as pics show. Has a strip of thermotape across the top (protect it from being roasted when parked in sun) - not an issue, but to mention it for detail of condition. Other than that, bloody choice bruv.

$200.

 

 

 

 

[hardsteppa]

Tein S-Tech springs, full set of front and rear- for R33 gtst plus others. Bought when I thought my coilovers has developed a knock but they hadn't, so these are test-fitted only - otherwise brand new still in box. These are the firmer type around 4.5kg from memory? so halfway between usual aftermarket springs and hard coilover springs. Possibly the best lowering spring for a street car that you can get.....possibly. Saw a post about counterfeits going around - check the logo and part number printing in the pics; they're genuine Tein. 

$300

 

[hardsteppa]

also have

- r33 gtst auto non abs tailshaft - R$30

- set of 6 r33 stock injectors - $20

- R33 gtst front LCA's, welded braces/boxed with Hardrace rubber bushes, VGC. $50

- R33 gtst stock front and rear camber arms, rear traction arms - $20 a set.

- GkTech hubcentric wheel spacers for R33/34, S14/14 etc - in 10mm, 13mm and 15mm thickness - $25 a set

[hardsteppa]

also - ARP main stud set for RB25DET - BRAND NEW still in box...although as you will know, these come in a plain white box as not an 'official" ARP product in their usual logo'ed box (put together by their dealers? - genuine ARP though). Bought for the engine rebuild I never got around to rebuilding. Only thing is I used the lube sachet for my head studs, so no lube but otherwise complete. 

Think they're around $350? steal then at $250.

[hardsteppa]

no we're not done yet - B&M oil cooler - multipurpose, but I used it as a auto trans cooler. Thick solid construction, laughs off flying road pebbles with ease. Comes with ducting and custom hardlines and mounting brackets - is 100% bolt on to your existing factory mounting points and rubber lines, for R33 gtst, in drivers side front of wheel arch.

$100

 

Stainless steel intake pipe and silicone joiners for r33/r34 gtst. Has the fitting for BOV return (2 in fact, if you're running aftermarket instead) and PCV return line. Also thermotape-wrapped for your pleasure.

$50

 

[Milkmun]

Hey chief, where are you located? 

[hardsteppa]

Brisbane, near airport

[Rusty Nuts]

Hey Hardsteppa i'll take the oil cooler and s/s intake pipe off your hands just what I need.

[Rusty Nuts]

p/m me when and where for pick up.

[iruvyouskyrine]

Are you able to measure the length of the R33 LCA's? Need new ones for my s15 if they are the same (think they are)

Bushing to balljoint would be great, cheers.

[Pattey21]

Hey mate sent you a PM

[hardsteppa]

6 hours ago, iruvyouskyrine said:

Are you able to measure the length of the R33 LCA's? Need new ones for my s15 if they are the same (think they are)

Bushing to balljoint would be great, cheers.

ehhy for sure my friend for sure, i do for you. It measure 395mm from tip to tip shown 'ere.

 

[iruvyouskyrine]

Sweet i will measure mine tonight and get back to you, cheers

[iruvyouskyrine]

Yep same same, I will take them

[hardsteppa]

B&m trans cooler and intake pipe now sold. Cheers to Rustynuts for a very smooth transaction.

Pm replied Josh.

[hardsteppa]

price drop on Tein springs, $250, and further info

SPECIFICATIONS
- Front Spring Rate: 4.1 kgf/mm
- Rear Spring Rate: 4.4 kgf/mm
Ride Height Drop (ECR33)
- Front: 32mm
- Rear: 30mm

[Arkhaeon]

On 1/4/2019 at 7:45 AM, iruvyouskyrine said:

Sweet i will measure mine tonight and get back to you, cheers

FYI, R33 arms don’t have the hole w/cup for the S15 swaybar link. Bump stop is also slightly different. 

[hardsteppa]

SAFC NEO now sold.

[hardsteppa]

Nismo FPR now off vehicle, ready to go.

Also have - BrakeWest s/steel braided lines. These are ADR compliant/stamped, and a very high quality line - same layout as stock with the mounting blocks built into the lines. Think Nismo but a little more heavy duty construction. Used but in extremely good condition. Front only sorry, I still use the rear lines. 

$40, or add $15 postage anywhere in Oz.

[hardsteppa]

Another 3in stainless intake pipe. Has ports for BOV and PCV return, and is thermowrapped. This is the lower section only this time. You need to use a 2.3in>3in reducer from turbo to the pipe, and the reducer pictured is 3in>3.5 (I have now gone 3.5in all the way so this section not needed). So use either another bit of 3in routed to your afm/filter/whatever, or go 3.5 (gave me a little better throttle response).

$50, or add $18 posted anywhere in Oz.