Jump to content
SAU Community

Recommended Posts

I know ther is a million posts about this but every singel post i read havent helped me yet.

I have the "standard" isue about the car strugeling/cuting at 4500rpm, after a wile it wil boost/fule cut if i keep holding the throtle, if i let go a bit i migth get it past 4500, but usaly dont. Turbo gets glowing hot, but car is running rich, dont have a afr but car spits flames.

Mods:

- 3" exhaust

- Pod filter

I have tried: 

- Changing plugs and gaping them

- new coils (yellow jacket)

- tried 2 difrent AFM's and mesured them

- cheked fule presure,, 36psi with vacume, 41psi wirout

- tryed to take out cat

- tryed to discobekt boost selinoid

- timing is 15° at 650-700rpm

Link to comment
https://www.sau.com.au/forums/topic/475734-rb25det-s2-isues-at-4500rpm/
Share on other sites

  • 2 weeks later...
On 1/8/2019 at 4:18 AM, tridentt150v said:

Yellow jacket coils are prone to failure, OEM or blue Splitfire are best...…..set your gap to 0.8.  But without a programmable ECU or SAFC etc it will go R+R.

What is wrong with the Yellow jacket? If they are so bad why are they stil sold? Shoud work fine on a stock car as far as i know

4 hours ago, TheKenso said:

What is wrong with the Yellow jacket? If they are so bad why are they stil sold? Shoud work fine on a stock car as far as i know

They are sold to unsuspecting people.

Seen any high powered RBs with them? Nope.

I ran then before, brand new set. 2 died, then a 3rd. Had 2x coils replaced then gave up. Money better spent on strippers and cocaine. Mind you it was breaking up at 1 bar boost, pathetic. Bought brand new Splitfires and put 1.7bar through it no worries.

A poor man pays twice.

Also try stock boost.

I run Yellowjackets, no issues (1.1mm spark plug gap). Although my engine is standard everything.

Once you start leaning on them, you'll run into problems. There's a reason they're cheap, and a replacement for standard engine/turbo/boost level (it gets you going at the very least).

If you're planning on more power, do what the others above said.

11 hours ago, Dose Pipe Sutututu said:

They are sold to unsuspecting people.

Seen any high powered RBs with them? Nope.

I ran then before, brand new set. 2 died, then a 3rd. Had 2x coils replaced then gave up. Money better spent on strippers and cocaine. Mind you it was breaking up at 1 bar boost, pathetic. Bought brand new Splitfires and put 1.7bar through it no worries.

A poor man pays twice.

Also try stock boost.

you guys need to read what im writing, car is STOCK exept for Exhaust, filter and coils, rest is completly stock, stock boost, stock fule, stock pistons, i baugth yellow jacket becasue it seamed like an OK change from originals on a STOCK car that is not gonne be tuned

Also if you have a thing against Asians, maybe go through your belongings and throw everything out that's made in China, Taiwan, Vietnam, Thailand, Philippines, Japan into the bin - that includes your car too.

Looked at your profile, I think you meant Nissans not Nissan's. Plural vs. Possessive.

20 hours ago, Leroy Peterson said:

I used to run yellow jackets on my stock engine and after less than 5000kms one of them died. Never again.

I'm surprised mine are still going even after track days. But they'll probably start failing after I post this.

In saying that, I drove my car once last year so it's not like it's used a lot.

19 hours ago, Dose Pipe Sutututu said:

Not sure what that was suppose to mean, but judging from your responses you're not a very receptive person.

i have tons of respeckt, but when he tels me a Australien firma is chinese somthing dosent make sens to me

 

7 hours ago, GTSBoy said:

What sort of dumb shit statement is that?

I wrote, "4 out of every 6 are usually f**ked in the box."

 

On 1/16/2019 at 10:36 PM, GTSBoy said:

They are unreliable cheap arse copy factory #876 Chinese crap.  4 out of every 6 are usually f**ked in the box.

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • They see me rollin' they hatin'....... Took me most of the day to make the necessary mods to the mounts to make them fit the car.  Fortunately I was able to just use the mounts that came with the rotisserie. The rear ones are really secure, the front I feel i might reinforce a bit more as it doesn't seem like enough attachment to the vehicle. I'm sure it's fine but better to be safe than (extremely...) sorry.  I drilled and tapped thread into additional M12 holes to each car mount where it attaches to the rotisserie as an extra fail-safe. Without them the side to side movement is just restricted by the allen head pinch bolts, nothing actually goes though the beam. Does now! I still need to adjust the rotisserie to get the car centred in terms of centre of gravity. If it's too high or too low relative to the rotational centre line of the car, it will be like a turtle and roll onto its back or as it currently sits, I dont think I'd be able to rotate it as it sits as it needs to lift the whole car up as it rotates. Ain't happening... I'm going to be nervous as hell the first time I go to spin it on its side...    
    • Oh yes done this when the window started flopping around.  Turns out the guides that run along the rail chanel had crumbed way. Took off the door card and pulled out the window mech, then the window, which you have to pull out through the top. As said unbolt the guide rail and don't spend 30 minutes getting frustrated trying to find a way to slide it out upwards cause that don't frigging work. Drop it down and out through the door hole. All I did to repair it was slice some 10mm clear plastic tube, vertically, then screw it to the guide rail both sides. This tubing rolls inward on both sides and leaves a gap wide enough to hold the window. To finish all I did was lube the plastic tube with olive oil and Bob's your uncle . . . well if he has the operation he can be your Aunt ! !  10 bucks in plastic tube and another 5 minute job done again . . . . YEH BULLSH#T ! My love for Skylines knows no bounds !
    • So was there a solution to this problem? I’m having this issue now. 
    • not expensive, just irreplaceable if you don't go sub 60 at wakie in that thing people will start talking
    • I haven't replaced that, but I have had the doors apart on the r32 a couple of times The door skin will be held on by a combination of clips and bolts, just take it slowly and make sure all the sneaky hidden bolts are out Once the skin is off you should be able to pop that piece off pretty easily, looks like there are only 2 bolts holding it on
×
×
  • Create New...