Jump to content
SAU Community

Recommended Posts

EFR 8374, IWG 0.92 A/R.  (slight damage to turbine wheel at edge)

6Boost T4 Divided Manifold to suit IWG.  Ceramic Coated.

Turbosmart IWG75

The lot for $2000ono.  (not looking to sell in parts at this point - it is cheap enough as is).

Guys, be aware that the reason for the cheap price is that the 8374 turbine wheel has sustained some damage.  I have provided a close up of the edge of the fins.  As you can see,  a small piece of something must have gone through it and it has taken 1 to 2mm off the outer edge (on all fins).  This was installed on an RB26/30 as per photos below.

I can say hand on heart that we did not 'know' about this damage. The car has been making the same outright power and I did not notice any lag etc.  The only reason we found it at all was that we removed the exhaust housing to get it ceramic coated and then saw it.   Believing this was a problem (and having some contacts at BW) we sourced a new one anyway and I have held onto this unit as a legitimate spare to throw on if we ever had an issue with the replacement turbo.   We never have, so its been in the cupboard for about 2years now.    We are now also going to bigger setup hence not needing this manifold and it made sense to move the lot as a kit.

For someone looking at upgrading from twins to a single and on a budget, this is good way to net you 600rwhp @1.4bar    (as this one did, even with this damage).  And then you're setup for upgrades later if you feel the need.

Parts 'missing' from it:   

  1. You will either need to block the blow-off valve if you are using externals - or source a replacement one. (edit: I might have sourced one, so will confirm).
  2. I have kept the speed sensor, so you can either fit your own or block off.  

I'm not in a big hurry to move this - its just clean up time.   I could still use it as a spare, so while I'm open to some negotiation please don't super low ball me.  Its very cheap buying as it is..

IMG_4641.jpg

IMG_4642.jpg

IMG_4636.jpg

IMG_4639.jpg

IMG_4632 (1).jpg

Closeup fins.PNG

18836706_10154734212972756_2530618631699502221_o.jpg

Link to comment
https://www.sau.com.au/forums/topic/475990-efr8374-more/
Share on other sites

  • 2 months later...

Back up FOR SALE!

Unfortunately - sadly - I've been stuffed around by a fairly active member on here who wanted it - We had several emails and phone calls - even gave me his address to send it to.     Then put me off for a while due to some other bills. (which was fine) . 

I held it for him as he said he was still keen - but would need a month or so -  what do you know - now he doesn't return emails or PM's.  Nice.

I even went and found a replacement BOV for it for him - so the only 'missing thing' now is a speed sensor.

I wish people would just man up - if your circumstances have changed - just let me know - I'm not going to bite your head off.

 

 

Price drop to $1900 

 

  • Sad 1
Link to comment
https://www.sau.com.au/forums/topic/475990-efr8374-more/#findComment-7903932
Share on other sites

  • 3 weeks later...

@GTScotT

Yep - recent Dyno attached.  Yes we wondered about EGT at the time as well - but the general consensus was something small had gone through it. Can't be 100% sure -  Was making around 620 at wheels at the time - didn't have EGT sensors, but wasn't on the bleeding edge or anything.

Do have 6xEGTs now though!  And knocking out 684 on a hub dyno.   

(Note we are rolling on boost down low deliberately.)

Matt JW GTR.JPG

Link to comment
https://www.sau.com.au/forums/topic/475990-efr8374-more/#findComment-7906727
Share on other sites

  • 9 months later...
Just now, bri73y said:

Did you end up selling the front diff gears ??

 

The 4.375?

Nope - still got front and rears (the rear includes a full GT-R diff housing, but no diff).   

Link to comment
https://www.sau.com.au/forums/topic/475990-efr8374-more/#findComment-7926186
Share on other sites

  • 1 year later...

 

On 09/03/2020 at 12:21 PM, R32 TT said:

The 4.375?

Nope - still got front and rears (the rear includes a full GT-R diff housing, but no diff).   

Might be a long shot but would you happen to still have the rear 4.375 gears you mentioned above?

Link to comment
https://www.sau.com.au/forums/topic/475990-efr8374-more/#findComment-7954203
Share on other sites

On 25/07/2021 at 3:40 AM, Bazil_1 said:

 

Might be a long shot but would you happen to still have the rear 4.375 gears you mentioned above?

If you’re chasing diff gears, Neat gearboxes manufactures diff gears for the R200 diff in a heap of ratios. 

  • Thanks 1
Link to comment
https://www.sau.com.au/forums/topic/475990-efr8374-more/#findComment-7954205
Share on other sites

  • 1 year later...
  • 3 months later...
On 27/04/2019 at 5:38 AM, R32 TT said:

Back up FOR SALE!

Unfortunately - sadly - I've been stuffed around by a fairly active member on here who wanted it - We had several emails and phone calls - even gave me his address to send it to.     Then put me off for a while due to some other bills. (which was fine) . 

I held it for him as he said he was still keen - but would need a month or so -  what do you know - now he doesn't return emails or PM's.  Nice.

I even went and found a replacement BOV for it for him - so the only 'missing thing' now is a speed sensor.

I wish people would just man up - if your circumstances have changed - just let me know - I'm not going to bite your head off.

 

 

Price drop to $1900 

 

Might be a long shot, but do you still have this? I'm interested.

Link to comment
https://www.sau.com.au/forums/topic/475990-efr8374-more/#findComment-7973405
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Major thread necro but how bad of a job is it to DIY? Looking at it online it looks like if you reuse your ring and pinion as long as those are in good condition it should be fine to just pull the axles/front cover and replace the diff that way? Or should I be replacing everything and doing preload measurements/gear mesh testing like the factory service manual mentions for the rear diff?
    • in my list I had the R33 GTR as the best Skyline. Infact I had all GTR's (33>34=32), the NSX, the GTO, the 300ZX, the 180SX, the S15 better than the FD RX7. I had the MR2 and the A80 as 'just' better. I also think the DC5R Integra looks better but this is an 01 onwards car. I also think the FC>FD. It's almost like aesthetics are individual! The elements @GTSBoy likes about the FD and dislikes about the 180 are inverse in my eyes. I hate the rear end of the FD and it's weird tail lights that are bulbous and remind me of early hyundai excels. They are not striking, nor iconic, nor retro cool. The GTO has supercar proportions. I maintain these look much better in person (like the NSX) especially with nice wheels and suspension which is mandatory for all cars pretty much. Some (or all) of these you have to see in person to appreciate. You can't write a car off until you see one in the flesh IMO. Like most people we probably just like/dislike cars which represent certain eras of design or design styles in general. I also think the 60's Jag E type looks HORRIBLE, literally disgusting, and the 2000GT is nothing to write home about. FWIW I don't think the Dodge Viper Gen1's have aged very well either. You can probably see where I rate bubbly coupes like the FD. I know we're straying now but the C4 and C5 absolutely murder the Viper in the looks department as time goes on, for my eyes. Wouldn't surprise me if people who love the FD, also love the MX5, Dodge Viper, Jag E Type, etc etc.
    • I used to hate R31s, and any of the other Nissans that led up to it, and any of the Toyotas with similar styling, because of the boxiness. They were, and remain, childish, simplistic, and generally awful. I appreciate R31s a lot more now, but only the JDM 2 door. The ADM 4 door (and any other 4 door, even if they are unique compared to our local one) can eat a bowl of dicks. The Aussie R31 is also forever tarnished by their association with stereotypical bong clutching Aussie R31 owners of the 90s and early 2000s. I think the Nissans of the 70s (other than 120Y/180B/200B) are far superior looking to the 80s cars. The 240K era Skylines are boss. The same is broadly true of Toyotas. Hondas don't ever register in my thinking, from any era. Mitsus are all horrid shitboxen in any era, and so also don't register. Subarus are always awful, ditto. Daihatsus and Suzukis also don't generally register. They are all invisible. I think the SW20 MR2 looks fiddly. The 3000GT/GTO is like that but way worse. Too many silly plastic barnacles and fiddly gimmicks ruined what could have been a really nice base shape. Kinda-sorta looks like a big heavy ST165 Celica coupe (and I'm not sure if that's a good thing or a bad thing). I think the 180SX is dreadfully bland. It's not bad looking. But it has no excitement to it at all. It's just a liftback coupe thing with no interest in its lines, and bad graphical elements (ie wide expanses of taillight plastic on the rear garnish). The S13 Silvia is a little better - getting closer to R32 shapes. But still....bland. S14? Nope. Don't love it. S15...a little better. Probably a lot better, actually. Benefits from not being like a shrunk in the wash R34 (where the S13 was a shrunk in the wash R32 and the S14 looked like a Pulsar or something else from the stable on Nissan mid 90s horrors). The Z32 was hot as f**k when it came out but hasn't aged as well as the A80. Keep in mind that I think the R33 is the most disgusting looking thing - and out of all the previous cars mentioned is objectively closest to my precious R32. It's just....real bad, almost everywhere you look. And that is down to the majority of what was designed in the 90s being shit. All Nissans from that era look like shit. Most other brands ditto. In that context, the FD absolutely stands out as being by far the best looking car, for reasons already discussed. Going behind the aesthetics, the suspension alone makes it better than almost any other car.  
    • If they just called it the "Mazda Tiffany", it would have been spot on.
    • Yup but for me its the HR ! Cut my teeth on the old holden 6s in the day ! And here's me thinking in the day it was also the 300ZX and the Mitsubishi GT3000 ! All, as well had good lines, but always seemed to need finishing off, style wise.
×
×
  • Create New...