Jump to content
SAU Community

Recommended Posts

I did have a tune back when i first got it and it was like 156.4. not all that great but it keeps up with my mates r33 and his is running about 180. I guess thats power to weight comming in.

So figures dont mean everything.

I did chip it after i had it dynoed.

adam

Hi All.

Very proud now to be posting as a Skyline owner..(R33 GTS-t)

I just bought Hawkies car (NSW) and I noticed your previous posts Bullet, I might require some rego assistance advice as I need to get it changed from NSW to ACT rego in the next few weeks.

I will be going over it this weekend.

MODS ARE: (just cut and paste)

ECU/Engine/Exhaust

APEXi power FC with H/C

Garrett T04Z 800HP twin ball bearing turbo.

Turbo smart 45mm waste gate with dump to atmosphere.

6 boost high flow exhaust manafold

Trust type-R BOV

Tomei 264 in/ex camshafts

Tomei 280L/H Fuel pump

NISMO 660cc injectors

NISMO Fuel regulator

NISMO Oil cap

Fujitsubo 3.1/2in exhaust with high flow cat

3 1/2in custom dump

Greddy Exhaust Adjustable Cam Gear.

Greddy Engine Oil Cooler

Greddy Oil Catch Can

Greddy Intake Plenum

Greddy Profec B boost controller

Port and polished RB25DET head

Q45 Throttle Boddy 90mm

Q45 AFM 90mm

Suction and cooling

APEXI power Intake

TRUST V-SPL Intercooler kit

Drivetrain

C's Quickshift kit

OS Giken Twin Plate Cllutch with lighten Flywheel

NISMO Oversixe slave clutch cylinder

Handling

Tomi Brake Master Cylinder Brace

FET Strut Tower Brace(f)

CUSCO Strut Tower Braces ®

DBA Drill and Slotted Roters (F&R)

Bilstein Strut and Whinelint Spring

Section HICAPS Lock Bar

Whiteline Handling Pack

Whiteline Urethene suspension bushes (F&R)

Whiteline anti-roll bars (F&R)

Exterior

R33 GT-R Front Bar with indicators

R33 GT-R style Rear Wing

R33 GT-R Style side skirt

I look forward to being able to finish this machine off and yarning to all you mob.

Edited by Cpt. Rock

Nice looking car and a decent power figure. However you should probably look at getting it engineered before you take it to dickson (and you will have to take it to dickson its too heavily modified for a normal inspection), they will bend you over backward and have their way with you so fast its not funny otherwise.

Hi All.

Very proud now to be posting as a Skyline owner..(R33 GTS-t)

I just bought Hawkies car (NSW) and I noticed your previous posts Bullet, I might require some rego assistance advice as I need to get it changed from NSW to ACT rego in the next few weeks.

I will be going over it this weekend.

MODS ARE: (just cut and paste)

ECU/Engine/Exhaust

APEXi power FC with H/C

Garrett T04Z 800HP twin ball bearing turbo.

Turbo smart 45mm waste gate with dump to atmosphere.

6 boost high flow exhaust manafold

Trust type-R BOV

Tomei 264 in/ex camshafts

Tomei 280L/H Fuel pump

NISMO 660cc injectors

NISMO Fuel regulator

NISMO Oil cap

Fujitsubo 3.1/2in exhaust with high flow cat

3 1/2in custom dump

Greddy Exhaust Adjustable Cam Gear.

Greddy Engine Oil Cooler

Greddy Oil Catch Can

Greddy Intake Plenum

Greddy Profec B boost controller

Port and polished RB25DET head

Q45 Throttle Boddy 90mm

Q45 AFM 90mm

Suction and cooling

APEXI power Intake

TRUST V-SPL Intercooler kit

Drivetrain

C's Quickshift kit

OS Giken Twin Plate Cllutch with lighten Flywheel

NISMO Oversixe slave clutch cylinder

Handling

Tomi Brake Master Cylinder Brace

FET Strut Tower Brace(f)

CUSCO Strut Tower Braces ®

DBA Drill and Slotted Roters (F&R)

Bilstein Strut and Whinelint Spring

Section HICAPS Lock Bar

Whiteline Handling Pack

Whiteline Urethene suspension bushes (F&R)

Whiteline anti-roll bars (F&R)

Exterior

R33 GT-R Front Bar with indicators

R33 GT-R style Rear Wing

R33 GT-R Style side skirt

I look forward to being able to finish this machine off and yarning to all you mob.

Welcome - That sounds like one SERIOUS R33, must make a sh!tload of power...

You will definitely have issues with ACT rego, most of your modifications wont even be accepted with an engineers certificate, such as: "Turbo smart 45mm waste gate with dump to atmosphere." - You will have to plumb this back into the exhaust as ANY atmospheric exhaust that doesnt pass through a catalytic converter is illegal.

APEXi power FC with H/C - For this to pass you will have to go Sydney and have an emissions test done, this means you will probably need to replace the exhaust with something A LOT more restrictive as the emissions standards are very very tight, not many cars pass this first time.

Everything esle will have to be engineered, I hope you have deep pockets because it will cost at least $1000 - $1500 to engineer all of those mods.

Call Canberra Motor Works in Mitchell and speak to Ray Spence - He is the only engineer that I recommend.

Good luck.

Thanks very all for the info, greatly appreciated.

Syds no probs as I'm up there 4 days a week...and I'll have a yarn with Ray.

Will get all this sorted first before I even look at anything else...so if you see a plain, no mags, dirty maroon 33...(its been sittin in a barn)....thats me :yes:

Thanks again

  • 3 weeks later...

Hi guys,

I'm a Supra owner, but with the ongoing discussions about combined Skyline/Supra events in the ACT I thought I'd take a look over here :-)

I drive a 1995 Toyota Supra. It's fairly stock, just a few little things - FMIC, Pod filter, Microtech ECU, front and rear strut-braces, AVCR boost controller, parallel twin mode for (as opposed to the factory sequential setup) and some small cosmetic stuff. It was a bit of a lemon when I bought it, so I was fairly bitter about the whole thing for a while, but I've sorted out most of the issues and am starting to enjoy it a lot more lately.

I damaged the front bumper recently, so my short-term goals are to replace the front bumper, replace the clutch (it's slipping), fix some details in the interior, and finish my stereo installation. Down the track I'll either go for a single turbo or sell it and buy a 2nd hand Lotus Elise and a daily - will cross that bridge in a year or so :down:

Currently makes 234rwKw on 14psi

Some photos:

2280989605_8a248ba6da.jpg

1340566697_8c4cfc4ad5.jpg

2295832832_e1642bba29.jpg

and a video from a recent skid day with FifthGear (you can see the tape where I damaged the front bar) - I met one of you there, but I can't remember your name sorry! Blue R32 GTR from memory?

Anyway, nice to meet you all :P

Well its about time i get into the community properly. Howdy! im Alex or Burnsie which ever, i was originally a Geelong boy, i have a R33gts25t S1, i love her to death, a recent purchase so im still discoving some of her mods, bits and pieces. best ride out. living in canberra for uni. I am also a memeber of MELBS15, shes running 195kw. :thumbsup:

Braided brake lines *goodbridge+

Tein type hr dampners (lowered)

Microtech ecu lt12

Front strut brace

Brakre cylinder stopper

Turbosmart dual boost controller, (in cabin missle switch)

Hks pod filter, 4 inch air flow metre

4 inch turbo back exhaust with 5 inch canon

Apec apache shadow rims, 18''

Kumoh ku31s

6000k HIDs

Aftermarket fuel regulator

Larger hybrid FMIC,

Melbs15 stickers (represent) woop woop

Jvc kd5785 head unit

Fusion splits

Megavox stormer 4/3/2/1 channle amp

Boss audio sub in box

Exide high performance battery

Carbon style auto meter boost gauge

Full body kit, front bar, skirts and rear

Tinted windows

Apexi turbo timer

Full steath alarm, hard core imobilisation and senors, fitter went to

town with this girl

im sure theres more to find but ay tis a start, have a good 1 guys

alex

post-48902-1206497745_thumb.jpg

  • 2 weeks later...

R34 RB25 Neo

FMIC

Oil Cooler

Engine Earthing

Pod Filter

Blitz DSBC

Type 3 BOV

Apexi AX75F82 turbo

Stainless steel exhaust manifold

3" turbo back exhaust

Z32 Afm

480cc Injectors

Bigger Fuel Pump - Unknown

Apexi PFC

100 Octane

261.3rwkw - 1bar(14.7psi) - 350rwhp

243rwkw - 0.8bar(11.5psi) - 327rwhp

234rwkw - 0.6bar(8psi) - 313.7rwhp

It's the only pic i have at the moment will get more soon.

post-39528-1207324875_thumb.jpg

post-39528-1207324893_thumb.jpg

post-39528-1207324905_thumb.jpg

  • 4 weeks later...

I see you every morning on my way to/from work. I am in the silver 32 with the mad panel damage on the side.

hey, i've been on here for a while now but haven't put up anything about my car yet so here it is!

4973510a5391558833m-1.jpg

4973510a5391559220m-1.jpg

4973510a5391558833m-1.jpg

4973510a5391730750s-1.jpg

4973510a5391643469m-1.jpg

4973510a5391680758s-1.jpg

4973510a5391595063m-1.jpg

4973510a5391643796m-1.jpg

4973510a5391681168l.jpg

Mods are:

18x8 and 18x9.5" starcorp racing impul wheels

JIC front and KYB rear adjustable coilovers

new discs all round with EBC green stuff pads

front strut brace

Front mount

3" turbo back exhaust with split dump pipe and high flow cat,

k&n pod filter

R33 turbo on 13psi

turbotech adjustable boost controller

bosch 040 fuel pump

Haltech E6K ECU

And a stereo that i dont want to post up here.

plans for the future:

new front bumper (most likely GTR style)

highflow the turbo

Buy bigger injectors

adjustable camber and caster arms/rods

1.5 or 2 way diff (haven't decided yet)

new coilovers

fabricate a mdf/fibreglass boot setup for the stereo

buy an interior re-trim kit in dark grey and sandy/tan color

and then drive the thing once its all done pretty much!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • S2/3 GT-R is the same as S2 GTS-t The SRS airbags module in under the centre console. The S1/S1.5 GTS-t and S1 GT-R had the module built into the steering wheel. FWIW, I have a S3 GT-R wheel in my S2 GTS-t shit box. Same airbag plug, airbag light goes on then off, meaning all systems are go. S3 GT-R has red stitching, that's about it.
    • Dumb question, but why would it matter if the wheel came off a car with hicas or not?
    • Hey to anyone that reads this, long time lurker first time posting, sorry if it’s been answered before but I’ve been looking for nearly a year now for answers. ive got a 25det neo in an r32 that works awesome when it works (made 500whp on 21psi) but works 45% of the time, 1st issue there’s a harness that runs under the passengers side front fender that my tire keeps rubbing through and one wire seems to power the fuel pump even though I’ve done the relay “mod” some people like to call it, and when it does rub through it kills the car, yes next time I’m with the car I want to take the fender off and try tuck the harness well out of the way but I’d also like to try and by pass this mysterious wire as well lol, also wouldn’t mind getting power from the alternator as I’ve read it supplies the pump with 13v ? But no idea where to run the power wire too. 2nd issue, when replacing my fuel pump and fuel hanger I managed to break the factory fuel level sender leaving me with no fuel gauge, I’d like to buy the fpg fuel level sender for r32/s13 but the plug it comes with confuses me, I’ve got a detschwerks x1 fuel hanger which has light + pump - level + pump + and a ground, I’m no auto sparky but I’m wondering if I can cut the plug off the fuel level sender and wire the negative to the pump negative and wire the positive to the level positive to get a fuel gauge back ?🥴 3rd and final issue, the reason I want a fuel gauge is because whenever it’s below half a tank, it fuel starves like crazy and runs like a bag of shit even without doing a pull or sloshing the fuel round in the tank, I’d also like to fix this but have no idea what’s causing it, I’ve got a dw420 and a dead head fuel setup meaning the fuel is regulated before it gets to the engine, my only theory is that the return line is to close to the pickup on the pump and when it’s at half a tank the return line is causing the pump to cavitate enough to cause fuel pressure issues, that or the pump isn’t low enough in the tank which I would find strange considering I can’t find a single thing online about it, also if ya wondering how I figured out it happens at half a tank without a fuel gauge, I waited until it started happening and went and filled up and the car took exactly 30 litres every time I tested it, if ya managed to read through this mess I appreciate that and any recommendations , cheers
    • ChatGPT is trash and lies about things I would not expect it to lie about considering many things it's wrong about are very easily verified with google. The S3 R33 GTR shares its steering wheel with R33 GTSTs of the same production year. Part number is 48430-26U17. I'm guessing you have to get it from a car that came with HICAS though, the ER33 is 48430-26U18, but the HR33 diagrams note that part number is still leather vs 48430-26U13 which is not leather-wrapped. They all use the same airbags, so if you need another one you can get it off basically any same year R33 or Stagea.
    • I'm going to run hard lines front to back in the future. That should help dissipate a bit more heat. If not, a fuel cooler might be next 
×
×
  • Create New...