Jump to content
SAU Community

Members Rides


Recommended Posts

A few on SAU know I bought this GTR32 in late 2004 and it's hardly been on the road due to a fair few events I would have rather done without.

Last weekend I pretty much finished and driving her was a real pleasure. Only a few more very minor things I want to do.

My GTR feels very strong and I'm excited and proud. So I'd like to share a picture or two I took off my phone on the weekend.

Oh and a shameless plug for the Paint shop - Rate highly :thumbsup:

Link to comment
Share on other sites

Looking awesome Richard! Can't wait to see her driving around!!!

Was good enough just being at CRD and seeing your face light up when you heard her start for the first time in a long time :thumbsup:

Link to comment
Share on other sites

Thanks Kat - yeah I was very excited the day it cranked over. It was good to share the experience. I Looked like this all that weekend :D

Ta Andrew - No dyno yet.

Running the build in. 1000kms down and 2000kms to go. Trip to Shep should get it up there and then back to Jim at CRD for the Performance tune.

She's limited down to about a 3rd of RPM/Boost :(

Expecting 300 - 340 awks on the -7's

Link to comment
Share on other sites

I'd put my hand up but I'm not really that good, but on the other hand I probably wouldn't say no if you offered it, that's after getting out of a car that has 160rwkw and getting into a car that's expecting 300 - 340 awks lol

Link to comment
Share on other sites

  • 2 weeks later...

Hi everybody,

I've had my 32 GT-R which I bought stock for a couple of years now. Decided to do a few mods recently.

I now run

ENGINE:

HKS 2.8L stroker kit

APR Main And head studs

Nitto Metal Head Gasket

2xGarrett GT2860R-5

Nismo Plenum

Tomei Expreem Manifold (Ceramic heat coated)

GReddy 264°/9.10mm Cams

N1 oil pump

Trust R-SPL Intercooler + Piping

Apexi Super Suction Kit

Z32 AMFs

GReddy Y piece inlet Pipe

Blitz BOV

Power Enterprise 700cc Injectors

Tomei Fuel pressure regulator

Nismo Fuel pump

Tomei Fuel rail

XForce 3.5 in Turbo back exhaust + Varex cannon.

Jim Berry Race Clutch.

Haltech Platinum Pro

Tein Super street coilovers

Cosmetic:

Carbon Fiber Bonnet

Nismo Floor mats

Recaro seats. (Not installed yet)

Veilside Body Kit. - Ugly as sin in my opinion.

Built and Tuned By Gas Motorsport.

Currently only running low boost. 275kw at all four on 16psi.

Pics to follow. Car is way too dirty atm to take photos.

Finally got around to ditching my ugly body kit and got a respray. I also got new wheels and got the high boost tuned.

I now have N1 front bar, stock sideskirts, and BBS LM's. (Knock offs). Colour is House of Kolor Matte Black.

Low boost is 18 PSI. I make 320kw @all4 on Pump fuel. High boost is 32 Psi and I make 380kw @all4 on VP MS- 109.

post-45839-0-83908000-1320304233_thumb.jpg

post-45839-0-98117900-1320304275_thumb.jpg

post-45839-0-80402700-1320304323_thumb.jpg

Edited by Jamtime
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • As far as I know, Infiniti stopped importing vehicles before 2020, even though they were still selling their stock for at least a year or 2 after that, they were older build years, therefore, you can import a 2020 400R, because you couldn't buy an AuDM 2020 built Q50 RS. As for insurance, you might need to go through one of the enthusiast insurance companies, they tend to insure a lot more grey import models than the mainstream insurers as Duncan mentioned.
    • loved seeing the zenvo on the a1 just after the hatfield tunnel i was the guy in the white van trying to egg you on it sounded awesome and those exhausts glowing red inside insane cheers for the thumbs up tim and tom.
    • So.... when I'm finally getting around to having my power steering leak sorted, now it looks like I've got the same issue most A/T Skylines are having. My A/T light will randomly come on and I'm stuck in 3rd gear until I turn the car off and on again. Only 3 weeks ago I did a complete transmission service: Oil flush + new gasket + new filter. This came out of nowhere!! It wasn't like the car was driven hard. I drove about 3 mins down the road to get fuel and boom!!!  Anyway, I have a few questions and hope you fine people can help me out here. All questions are in red. 1. The solenoids: I was looking at the parts catalogue in Amayama and I could only find the Solenoids as an assembly. https://www.amayama.com/en/part/nissan/319404ax05 I read in another thread that Solenoid A = 31940-4AX02 & Solenoid B = 31940-4AX05 but the Amayama product has only the code of B. Is this the right part? Can anyone who has done the Solenoid changes or seen them confirm if this is the complete set of A & B?   2. Gasket and Filter: I'm not going to try change the solenoids myself because it seems difficult to do in a home garage with just 2 jack stands. I plan to take it to a shop and get it changed. I was also going to buy the transmission sump gasket at the same time so I don't reuse the same gasket. Should I just use the existing gasket as it has only been on the car since OCT 19th? (~3 weeks) Should I be buying a brand-new gasket and a filter? Does this job involve taking the filter out?   Thanks in advance to everyone. It's hard to find a video of someone doing a solenoid change on a R34 so any help you can give answering my remaining questions would make me less stressed.
    • Yea - From what I have seen from the video, the car idles like any R34 lol 50PSI of fuel pressure is hardly super abnormal, the regulator is working because the pressure remains static when the throttle gets revved, i.e pressure remains the same when manifold vaccuum changes. Bigger pumps on stock rails always bumped the pressure in the rail without using an aftermarket regulator to change that. Do you know what your IAC is actually doing? Has there been any data showing the stepper motor % etc? There's no way your idle is actually moving around the way the cluster(s) are indicating. You would hear the difference with the engine RPM flying to 3k and 1k in mere seconds. I'd be checking the wiring to the tacho. What the tacho is telling you and what the engine/ecu is telling you are different things. I assume your ECU doesn't display the spike. So whatever is telling the tacho to be at X rpm is doing something weird. When the going gets insane, you're on the wrong path. You've ruled out plenty of things that are working correctly/aren't the issue. Your idle isn't doing what the tacho is indicating. You have two seperate issues, I don't think they are linked, and the idle seems reasonably okay unless it's stalling which.. well, it hasn't. Troubleshoot the stall if it occurs by figuring out what your IAC is doing vs what it is being told to do.
    • So awesome! I love the RB with the exhaust on display.
×
×
  • Create New...