Jump to content
SAU Community

Recommended Posts

Just installed my mates system for him, sub 6x9's and head unit. Didnt notice it before I put the amp and sub in but when we took it for a "fully sik test cruise" every 10 seconds or so the sound cuts out for a split second, the song keeps going but just for the split second there is nothing, no idea what could be causing it ... I would give you specs of the system but all I know is he has my old JBL GTO400 600watt amp and a 12 inch Pioneer sub. dont remember the model of the deck or anything, so anyone shed some light on this for me

cheers

Sam

Link to comment
https://www.sau.com.au/forums/topic/47611-sound-cutting-out/
Share on other sites

12 inch pioneer amp??? lol

Whats the rating for the sub?? maybe your amp is playing up on ya... might be cutting out coz of hign voltage or bad signal...

The problem is most likely the amp im guessing. Are all the speakers cutting out or just the sub??

If it is all then the amp is your culprit. I suggest temporarily fitting another amp to test and see...

Link to comment
https://www.sau.com.au/forums/topic/47611-sound-cutting-out/#findComment-972031
Share on other sites

I just had to give back my 1200 w S amp :) so im also looking for another one.. so I have no bass in the car.. and the amp my mate is iusing he bought off me about a week before I had to get rid of my good one, so I wasnt to happy about that one :D

but oh well...

looks liek i need to go shopping :)

Link to comment
https://www.sau.com.au/forums/topic/47611-sound-cutting-out/#findComment-972051
Share on other sites

If all the speakers are hooked up to the amp try to plug some directly into the HU.

If all speakers/woofers cut out-

Check all the wires to each speaker/driver. If they short it will cut-out from the HU.

If it's just speakers connected to the amp that cut out-

Make sure your groundwire isn't jumping around and it's in securely attached. Also make sure it's the same guage as your power cable.

Make sure your 'remote" (usually blue) is connected properly and getting current. If it's falling out or jumping around your amp might be being told the HU is off.

Also - if your HU lights cut out (ie. the power to your HU cuts out as well) then you may not have enough current to your HU in which case it's the incorrect power cable you're hooked into or ground wire is lose.

Other than that if all your speakers are hooked up to the amp and you can't be bothered hooking up some speakers to the HU I would put the amp in the car where you can keep an eye on the light and see if it's cutting out.

Hope that helps. Let us know how it goes.

Link to comment
https://www.sau.com.au/forums/topic/47611-sound-cutting-out/#findComment-972218
Share on other sites

Well if only the sub is hooked up to the amp and yet all other speakers (I'm assuming they'd be then hooked up to the HU) are cutting out then theres no reason to think it's the sub thats busted.

If all the speakers cut out, but the sub stays on (even though the driver cuts out) AND the head unit stays on I'd find that quite strange.

I would say it's quite strange if the HU stays on but doesn't produce any output. I wonder if it's possible the current is dropping enough for the HU to be unable to produce output but not enough for it to turn off. I've never seen that happen and don't know if it's possible. When your mate gets back see if it happens above a certain volume. This might give you a clue to this fact.

Good luck - let us know how it goes slash when he gets back.

Link to comment
https://www.sau.com.au/forums/topic/47611-sound-cutting-out/#findComment-972683
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Been over 2 months since I have done anything on the S15 and had a day off today so got stuck into mounting the radiator and intercooler. I ended up using factory bottom mounts as bolted in and I did order some gktech top brackets but didn't work with the PWR radiator so made up some with aluminium flat bar. Spent way to long on them but pretty happy how they are. Next job was the intercooler. Used some more aluminium flat bar and did the bottom mounts first. Top was easy as just one long piece and 2 90 degree coming off rad support and welded them on. The bumper support required some notching to let the outlets sit where I want so will add some reinforcement later to strengthen it. I have also bought ecu and waiting for it to arrive. Went with a Link g4x Xtreme but will be adding a ptmotorsport expander to add a few extra inputs over CAN. Went through a few different configurations on pclink to get what I want to allow future expansion for sensors and gearbox upgrades. Ordered gktech rear arms but looking at the hardrace lower control arms to have some extra adjustment too will see how the alignment looks after first setup. Got 2 more weeks of work before shut down and will have almost 4 weeks to work on this so planning on hopefully firing up mid January.   Also bought a 2015 brz with a heap of good gear, did noosa hill climb a month back. Owned it for 3 days changed alignment and sent it. Finished the weekend 2nd in class and only .3 off the 180sx best time last year. MCA Red coilovers, gktech rear lca, bolt on lock kit and tie rods, whiteline toe arms, cusco 1.5way diff and 4.5 ratio, endless brake pads, headers, exhaust, perrin intake and e85 tune. Electronic steering adjustment, nankang crs with koya wheels 17x9 +35. Have bought rear traction arm and relocation kit, extended studs and v3 tie rod kit. Planning on also getting flex tune as lucky to get 300km a tank with e85 and short ratio. Car is a heap of fun to drive and super easy to work on. AC in the line up at Noosa was mint in 35degree weather.
    • I'm 22 years younger than you mark, and I'm operating in the exact same way! Ha ha ha
    • All clamps are oem    one question is , what is the bit at the top on high pressure pipe where it connectes to intake manifold and other side goes toward the engine( see item in red circle in diabram attached)   ? Seen some people stating that should be removed on boosted application and skyline is boosted from manufacture so little puzzled. Mine is around 23pwi (700 hpish)   also some state it could be the bonjo bolt crash washer so bought two washers
    • what do you mean dead platform? People buy older, out dated and less power cars on "Dead platforms" for over $65k all the time.
    • That is really nice! Very nice finish when you have an oven to do the crinkling nice and evenly!
×
×
  • Create New...