Jump to content
SAU Community

Recommended Posts

Up for sale is my 1999 ER34 Skyline GT-T , Imported in 2007 I have been the only owner of this vehicle in Australia. This car has been my daily driver for the last 11 years and has served me very well, its reliability so far has been A1. 

The car currently has 242,XXX genuine kilometres on it. I have looked after this car as if it was my own child, with no expense spared on maintenance to ensure a reliable car. Engine oil is changed every 5000K, with fluids and other consumables changed at regular intervals, and of course always run on 98. I had always intended to keep this car forever, but life’s circumstances have forced me to change direction. This vehicle has never been raced, thrashed, tracked or abused. -  as hard as that might be to believe, I’m quite often ridiculed for my ‘grandma’ attitude towards driving J

I won’t claim that this car is ‘Mint’ but I consider it to be in very good condition. There are obviously a few imperfections that come with owning a 20 year old car. I’m more than happy to point the not so obvious ones out on any inspections and give a more in depth explanation of its history for buyers with genuine interest.

I have all receipts for parts purchased and work undertaken throughout its lifetime. I have the Auction sheet and all export paperwork.

In addition I also will be offering  with the car sale all the stock parts that have come off the car for example;  clutch fan, Underbody Splash guard, stock ECU, NEO Engine cover, 4 x stock 17’” rims, stock AFM, and various replacements clips and bolts I’ve acquired over time

Please only contact if you are genuinely interested in buying, I don’t have the time (or patience) to deal with low ballers or tyre kickers.

If you require additional photos of particular aspects of the car, they can be given on request.

Thanks for reading!

Price: $17,000 (open to negotiation for genuine buyers only)

Location: Cairns

Contact: Please PM for any enquires or further details

Vehicle Details:

-          Registered until OCT 2019

-          Unopened RB25DET Neo  (242,xxx K)

-          Dyno’d at 244rwkw @ 15 psi (tuned by Dale – Castle Hill Performance)

-          OEM Xenon Headlights

-          Apexi  PowerFC & Hand controller

-          Alpine IDE-178BT head unit

-          HKS GT-RS Turbocharger

-          725cc Injector Dynamics injectors

-          Splitfire Coilpacks

-          Nismo Fuel Pump

-          Aeromotive FPR

-          Blitz SE Return-flow front mount intercooler

-          Apexi Pod Filter (also have stock airbox)

-          Z32 Airflow meter

-          Nismo Thermostat

-          Nissan N1 Waterpump

-          PWR radiator

-          Turbosmart Eboost Street EBC

-          Full CES Racing 3” Stainless  exhaust with Highflow 200 cell cat, Dual tip Magnaflow muffler.

-          Nismo braided brake and clutch lines.

-          Nismo Coppermix Sports (Single plate) clutch kit (with lightened flywheel)

-          Nismo LM-GT4 18x8.5 +30 & 18x9.5 +38. with Bridgestone RE003s

-          Whiteline Front and Rear adjustable swaybars

-          Whiteline Adjustable rear control arms

-          TEIN Super Street Coilovers

-          DBA4000 Slotted rotors

-          Mongoose Alarm

IMG1.jpg

IMG2.jpg

IMG3.jpg

IMG4.jpg

IMG5.jpg

IMG6.jpg

IMG7.jpg

IMG8.jpg

IMG9.jpg

IMG10.jpg

IMG11.jpg

IMG12.jpg

IMG13.jpg

IMG14.jpg

IMG15.jpg

IMG16.jpg

IMG17.jpg

IMG18.jpg

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/476167-for-sale-1999-r34-gt-t-manual/
Share on other sites

  • 1 month later...
  • 2 weeks later...
On 5/1/2019 at 8:47 AM, junkie said:

242k km on it and in better shape than the majority of others with half the mileage. amazing

Because they probably have twice the mileage ?

I reckon it's funny there are still 20-25yo+ Jap cars getting around with under "100,000" on the clock

  • 3 weeks later...
On 5/8/2019 at 10:40 PM, Birds said:

Because they probably have twice the mileage ?

I reckon it's funny there are still 20-25yo+ Jap cars getting around with under "100,000" on the clock

Mine still has only 7X,000 on it. (I think it's 75)

Hasn't had a single KM added to it in 9 years :)

Mine has 98K....I've owned it for over 15 years.  I only drive it on trips, so not that often.  Its not a daily, I have a crappy 4wd that I use for that.  I also use my motorbike for lots of trips.

And the bloke that owned it before me put 1700km on it in 2 years [I have the import docs].  Its an April '98, he imported it in Jan 2000, with what we think is correct mileage at 38k, I bought it off him in Nov 2001.

On 5/27/2019 at 10:42 AM, tridentt150v said:

Mine has 98K....I've owned it for over 15 years.  I only drive it on trips, so not that often.  Its not a daily, I have a crappy 4wd that I use for that.  I also use my motorbike for lots of trips.

And the bloke that owned it before me put 1700km on it in 2 years [I have the import docs].  Its an April '98, he imported it in Jan 2000, with what we think is correct mileage at 38k, I bought it off him in Nov 2001.

In the total of 13 years I've only put 5,000 km on mine. Just none in the last 9 years Ha ha

On 6/4/2019 at 12:05 PM, niZmO_Man said:

Create a for sale thread for it :)

Why? I'm not advertising it forsale, but I am happy to sell it if someone wants to pay. 

We're now having a nice friendly chat about skylines. 

  • 1 month later...

Just seen this thread.. my 99 r34 gtt - red - 2nd oz owner had it since 2005.. 96,000 on the clock. Just starting tracking it, been to sandown and Broadford. Never used as a daily bought it with 36,000 and drove it down from QLD. Best road trip with ma old man !SmartSelect_20190624-165323_Photos.thumb.jpeg.902100addfcf5082d5a0f973f39740a7.jpegreceived_2279016689018696.thumb.jpeg.67cdc78ea38ca8f76372766d78575eac.jpeg

 

 

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wouldn't be concerned at all, other than to suggest having them flow tested when you receive them to confirm they are reasonably similar, and then put the highest to lowest flowing ones in cylinder 6,1,5,2,4,3
    • I’m only posting this cause I thought I had seen a bad review on these somewhere before. Any feedback? Would you guys recommend that if I do buy these I send em to RC to have em checked before installing. Or any other suggestions?   https://www.ebay.com/itm/114009965865?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=JDl-15yLQ8C&sssrc=4429486&ssuid=QTzlFXB1S-S&var=&widget_ver=artemis&media=COPY
    • They see me rollin' they hatin'....... Took me most of the day to make the necessary mods to the mounts to make them fit the car.  Fortunately I was able to just use the mounts that came with the rotisserie. The rear ones are really secure, the front I feel i might reinforce a bit more as it doesn't seem like enough attachment to the vehicle. I'm sure it's fine but better to be safe than (extremely...) sorry.  I drilled and tapped thread into additional M12 holes to each car mount where it attaches to the rotisserie as an extra fail-safe. Without them the side to side movement is just restricted by the allen head pinch bolts, nothing actually goes though the beam. Does now! I still need to adjust the rotisserie to get the car centred in terms of centre of gravity. If it's too high or too low relative to the rotational centre line of the car, it will be like a turtle and roll onto its back or as it currently sits, I dont think I'd be able to rotate it as it sits as it needs to lift the whole car up as it rotates. Ain't happening... I'm going to be nervous as hell the first time I go to spin it on its side...    
    • Oh yes done this when the window started flopping around.  Turns out the guides that run along the rail chanel had crumbed way. Took off the door card and pulled out the window mech, then the window, which you have to pull out through the top. As said unbolt the guide rail and don't spend 30 minutes getting frustrated trying to find a way to slide it out upwards cause that don't frigging work. Drop it down and out through the door hole. All I did to repair it was slice some 10mm clear plastic tube, vertically, then screw it to the guide rail both sides. This tubing rolls inward on both sides and leaves a gap wide enough to hold the window. To finish all I did was lube the plastic tube with olive oil and Bob's your uncle . . . well if he has the operation he can be your Aunt ! !  10 bucks in plastic tube and another 5 minute job done again . . . . YEH BULLSH#T ! My love for Skylines knows no bounds !
    • So was there a solution to this problem? I’m having this issue now. 
×
×
  • Create New...