Jump to content
SAU Community

Recommended Posts

 Hi ther all friends and foes, i have recently had huge problems with my RB25det S2 (auto) , wher the car is running fine when cold, when it starts getting up to temp its starts to mess up, somtimes at 3000 somtimes at 4000, and when its warm up its ok agen. At one od the videos below, i have full throtle, car struggels and dosent do anything, then hits 4000rpm and it launches.

Btw. Dont mind the temp gauge, belive the sensor for the gauge is messed up so it lives it own life

Ther is no air leaks, no vacume leaks, coils are new, plugs are new, tried replacing maf 2 times.

When MAF is disconekted the engien wil stop.

Alsow from what i can finde online, the tps is supose to have 5v (i have around 4.5) when fully open, and betwen 0.3-0.5 when closed (alot of wierd answers on the internett)

 

Stuff that have recently been done:

- Adjusted timing to 15° (pulled TPS and Brown idle controll valve stick)

- New coils

- New plugs

 

"Mods"

-3" exhaust from turbo and back

- pod filter

 

 

20190214_145440.jpg

Link to comment
https://www.sau.com.au/forums/topic/476383-rb25det-s2-wont-run-corekt/
Share on other sites

Disconnect the water temp sensor that goes to the ecu (the one with 2 terminals) when you turn the car off. Start again when the car is cold (overnight ideally).. If your car runs better (ecu has a standby map) then you need to replace that sensor.

  • Like 1
5 hours ago, KiwiRS4T said:

Disconnect the water temp sensor that goes to the ecu (the one with 2 terminals) when you turn the car off. Start again when the car is cold (overnight ideally).. If your car runs better (ecu has a standby map) then you need to replace that sensor.

Wil try :)

 

11 hours ago, Dose Pipe Sutututu said:

Put OEM coil packs in or Splitfires and see if it goes away.

I can try bit dubt it wil do anything, error acured after i finaly figured out my timing isue, feels like the car stil has timing isues but is 99%sure it dosent, 

50 minutes ago, Dose Pipe Sutututu said:

I won't go into detail about those coloured coil packs, but just do a few searches.

I know ther is alot pf hate on the yellow jacket, but was all i had cash for, have been unemploied for 2 years, and they seam fine, been looking over then for all the normall stuff that ppl cpmplain about.

But always worth the try

29 minutes ago, TheKenso said:

I know ther is alot pf hate on the yellow jacket, but was all i had cash for, have been unemploied for 2 years, and they seam fine, been looking over then for all the normall stuff that ppl cpmplain about.

But always worth the try

It's not hate, it's fact. Look at them all you want but don't assume they are actually working properly!

2 years no job is a solid effort 

11 hours ago, KiwiRS4T said:

Disconnect the water temp sensor that goes to the ecu (the one with 2 terminals) when you turn the car off. Start again when the car is cold (overnight ideally).. If your car runs better (ecu has a standby map) then you need to replace that sensor.

Disconekted the temp sensor, drove it for 5 minutes, stoped the car, when i started it 5 min after the car woudent start befor i replugged it

5 hours ago, TheKenso said:

Disconekted the temp sensor, drove it for 5 minutes, stoped the car, when i started it 5 min after the car woudent start befor i replugged it

You shouldn't have stopped the car. If you unplug the sensor the ecu has a default map which has no relation to actual engine temps which will take it through until normal operating temps. By stopping the car you reset the ecu to cold start whereas the engine was no longer cold. I suggest you get a new temp sensor (the one with 2 terminals) - they are only about $30 from an auto electrician.

And there is no way you can tell if your yellow jackets are any good by looking at them. Try gapping your plugs down to 0.8mm or even .6mm

14 hours ago, KiwiRS4T said:

You shouldn't have stopped the car. If you unplug the sensor the ecu has a default map which has no relation to actual engine temps which will take it through until normal operating temps. By stopping the car you reset the ecu to cold start whereas the engine was no longer cold. I suggest you get a new temp sensor (the one with 2 terminals) - they are only about $30 from an auto electrician.

And there is no way you can tell if your yellow jackets are any good by looking at them. Try gapping your plugs down to 0.8mm or even .6mm

Cant leave the car running when u have to get the kid from kindergarden, somone migtj be jelly.

 

Out ther on the webs, when u just search For stuff about the yellow jacket ther ar eppl talking about craks, bad this bad thst so ther are indecators on the coils beeing bad, but are gonna pur the oem back in, not thst i think ther wil be any diffrence

Yellow jackets suck. You don't need to see cracks to realise that when you have experienced it yourself. They can look perfect and not work properly. How they are still around I have no idea.

 

Also just curious how are you managing to spell so badly ? Doesn't your phone do autocorrect? Makes it pretty hard to read.

  • Haha 3
9 hours ago, Ben C34 said:

Yellow jackets suck. You don't need to see cracks to realise that when you have experienced it yourself. They can look perfect and not work properly. How they are still around I have no idea.

 

Also just curious how are you managing to spell so badly ? Doesn't your phone do autocorrect? Makes it pretty hard to read.

Auto corekt is more of pain the help, but atleast i speack 2 languages, 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Major thread necro but how bad of a job is it to DIY? Looking at it online it looks like if you reuse your ring and pinion as long as those are in good condition it should be fine to just pull the axles/front cover and replace the diff that way? Or should I be replacing everything and doing preload measurements/gear mesh testing like the factory service manual mentions for the rear diff?
    • in my list I had the R33 GTR as the best Skyline. Infact I had all GTR's (33>34=32), the NSX, the GTO, the 300ZX, the 180SX, the S15 better than the FD RX7. I had the MR2 and the A80 as 'just' better. I also think the DC5R Integra looks better but this is an 01 onwards car. I also think the FC>FD. It's almost like aesthetics are individual! The elements @GTSBoy likes about the FD and dislikes about the 180 are inverse in my eyes. I hate the rear end of the FD and it's weird tail lights that are bulbous and remind me of early hyundai excels. They are not striking, nor iconic, nor retro cool. The GTO has supercar proportions. I maintain these look much better in person (like the NSX) especially with nice wheels and suspension which is mandatory for all cars pretty much. Some (or all) of these you have to see in person to appreciate. You can't write a car off until you see one in the flesh IMO. Like most people we probably just like/dislike cars which represent certain eras of design or design styles in general. I also think the 60's Jag E type looks HORRIBLE, literally disgusting, and the 2000GT is nothing to write home about. FWIW I don't think the Dodge Viper Gen1's have aged very well either. You can probably see where I rate bubbly coupes like the FD. I know we're straying now but the C4 and C5 absolutely murder the Viper in the looks department as time goes on, for my eyes. Wouldn't surprise me if people who love the FD, also love the MX5, Dodge Viper, Jag E Type, etc etc.
    • I used to hate R31s, and any of the other Nissans that led up to it, and any of the Toyotas with similar styling, because of the boxiness. They were, and remain, childish, simplistic, and generally awful. I appreciate R31s a lot more now, but only the JDM 2 door. The ADM 4 door (and any other 4 door, even if they are unique compared to our local one) can eat a bowl of dicks. The Aussie R31 is also forever tarnished by their association with stereotypical bong clutching Aussie R31 owners of the 90s and early 2000s. I think the Nissans of the 70s (other than 120Y/180B/200B) are far superior looking to the 80s cars. The 240K era Skylines are boss. The same is broadly true of Toyotas. Hondas don't ever register in my thinking, from any era. Mitsus are all horrid shitboxen in any era, and so also don't register. Subarus are always awful, ditto. Daihatsus and Suzukis also don't generally register. They are all invisible. I think the SW20 MR2 looks fiddly. The 3000GT/GTO is like that but way worse. Too many silly plastic barnacles and fiddly gimmicks ruined what could have been a really nice base shape. Kinda-sorta looks like a big heavy ST165 Celica coupe (and I'm not sure if that's a good thing or a bad thing). I think the 180SX is dreadfully bland. It's not bad looking. But it has no excitement to it at all. It's just a liftback coupe thing with no interest in its lines, and bad graphical elements (ie wide expanses of taillight plastic on the rear garnish). The S13 Silvia is a little better - getting closer to R32 shapes. But still....bland. S14? Nope. Don't love it. S15...a little better. Probably a lot better, actually. Benefits from not being like a shrunk in the wash R34 (where the S13 was a shrunk in the wash R32 and the S14 looked like a Pulsar or something else from the stable on Nissan mid 90s horrors). The Z32 was hot as f**k when it came out but hasn't aged as well as the A80. Keep in mind that I think the R33 is the most disgusting looking thing - and out of all the previous cars mentioned is objectively closest to my precious R32. It's just....real bad, almost everywhere you look. And that is down to the majority of what was designed in the 90s being shit. All Nissans from that era look like shit. Most other brands ditto. In that context, the FD absolutely stands out as being by far the best looking car, for reasons already discussed. Going behind the aesthetics, the suspension alone makes it better than almost any other car.  
    • If they just called it the "Mazda Tiffany", it would have been spot on.
    • Yup but for me its the HR ! Cut my teeth on the old holden 6s in the day ! And here's me thinking in the day it was also the 300ZX and the Mitsubishi GT3000 ! All, as well had good lines, but always seemed to need finishing off, style wise.
×
×
  • Create New...