Jump to content
SAU Community

Recommended Posts

Greetings SAU’ers

I've been out of the highly rewarding yet never-ending battle of modded Japanese fang mobiles since circa 2008 when my very nice S15 was loaded onto a flat bed truck, in pieces, never to return. It’s been about ten years now and the pain has finally subsided so time to throw the hat back into the ring.

I have recently picked up a very nice S15 albiet embarrassingly stock. But perfect for a from scratch, no cut corners proper build. Being 10 years richer than the time when S15 #1 bit the dust, I am in a position where I can drop the car at a workshop and tell them to go for it. Sooooooo….

I’m hoping for feedback on tuners in Melbourne. And before someone says “newbie di*khead – do a search….” I have done a search however it is unclear which tuners will do work on the car and tune it i.e. someone like Dr Drift or Revzone, and tuners which will only do dyno tuning i.e. Chequered I read somewhere they only tune…. Which is a shame as they are raved about (in a good way).

So, has anyone had any recent good / bad / excellent experiences with a Melbourne tuning shop, taking into account that I am going to entrust them to do a satisfactory job with good workmanship and parts I might or might not supply…. I don't want to be just bled dry of cash and recommend whatever parts combo suits them/easiest for them and/or they make the most cash off. I really like the idea of Nistune I have been down the Power FC route before…. I think they are troublesome. I see Dr Drift does nistune and also Chasers and RevZone, anyone been to these places recently? I think I remember RevZone being the upmarket option, doing A1 work but expensive?

The build will be bolt ons only, not touching internals, but when I say bolt ons it will be the full arsenal.

Feedback most appreciated! Would love some recommendations but even just as handy please advise where to stay away from, it’s a jungle out there and I don’t wanna get lost in it. No need to slag off any shops on here but PLEASE PM me if you have advice that is not quite “constructive criticism” - i'd be most grateful.

Thank you all and thank you for going easy on the newbie, I look forward to sharing more about the build once it kicks off.

Sabbadin automotive. SR20 specialist, will do all work, fabrication and inhouse dyno tuning. Excellent one stop shop. Can supply new oem and aftermarket parts at reasonable prices. Also has his own S15 racecar that has gone through many years of development.

 

Forced motorworx, also highly versed in sr20 builds, will carry out all work and fab, usually outsources tuning to chequered.

 

And yes, chequered is pretty much tuning only. You can imagine that someone who tunes all day everyday is pretty damn good at it and up there with the best. (Can be frustrating if your car has minor issues and tune can't be finished.)

 

I have heard good things about revzone but have no experience with them.

 

Racepace is also one to consider as a one shop solution.

 

Springy motors is another one that can build and tune a good sr20 and carry out all other work.

 

Plenty of options, do a bit of research on the above shops and take your pick.

 

 

Personally i generally do preparation and mechanical work myself on my car. I've had no issues using chequered tuning for multiple cars. Tunes have always been great.

  • Like 2
  • Thanks 1

 I have an S15 last year I did the big plunge and built SR 2.2 stroker very very quick car racepace motosport in Bayswater did the complete build custom turbo and tuned I can highly recommend them

  • Thanks 1

Many thanks gents, I think all my questions have been answered! And yes a few people have said Forced Motorworx a good option.

And yeah heard lots of good things about Chequered, might end up there one day once everything is up and running

I've just started using RevZone and have been pretty happy with the work. I like to understand exactly what happened on the dyno and review the logs, issues and solutions with the tuner which Justin and his team are happy to do. My car has a fair bit of Motec gear in it and a pretty custom setup, so it took some mucking around to get it right. When I got the car back, the cold start wasn't awesome (not terrible either, just some hunting around 20c) so I sent Justin a quick email to see if they could give me some pointers as to the cause because there's a few comp tables running concurrently at that time in my setup. Rather than just give me the answer or tell me to bring it back, he offered to send his tuner to my house to fix the problem free of charge. Pretty good service I reckon.

I've had cars tuned at many other shops in the past and have been less than impressed. Good power tunes but shit attention to detail and poor drive-ability. 

  • Thanks 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm not up to date on the latest, but for basic modifications like pod filter, lower springs etc you can get a modification permit at the time of inspection.  For more serious modifications you will need engineering.  Intercoolers used to fall into the mod permit rule but its been a long while since i looked it up.   Either way you will be able to get it registered, just a case of $300 vs $3k . 
    • Hi everyone! I’m the new owner of a 1996 R33 GTS-T, I’ve purchased this car over from Queensland and brought it to Western Australia and I’ve found that there is a hole cut out in the engine bay for the FMIC that enters into the wheel well (fender liners are in the boot). For anyone that has had to get their car over the PITS here, will this be a major issue?   
    • Yeah I've spotted this one too, whenever it's lotto superdraw week and I'm browsing car sales dot com for my new ride They must be dreaming, maybe it's worth 150k for the link to Brock?
    • 100% accurate!  We are a pack of know it alls....  But, I bet people go to you when they have a problem! I've been on a bit of a clean up rampage too over the past month!  I've thrown more shit in the bin over the past 2 weeks than I have in the past 3 years combined! Anyway, it's all good fun being different! My wife sometimes does not agree!  
    • ADHD in all form isn't about "can focus, or can't focus" or is hyper active or isn't etc.   It's all a dysregulation. Either time feels to be stationary, or time just vanishes in a split second. We are either under focussed on the task at hand (as we're over focussed on our surroundings) or we have no idea an atomic bomb went off beside us as we're so hyper focussed and locked in on things.   Not to mention the rapid fire thought process. What it takes a "normal" process to think up a solution to a problem, ADHD will be able to give you 5 different ways to solve the problem, and the pros and cons of each. While we can be highly impulsive and lack the ability to "control ourselves" we can also become paralysed with the inability to make a decision for ourselves. While most of us have an OCD like requirement for perfection, we lack the ability often to remain focussed to get things to a perfect state. Those with undiagnosed ADHD as adults, can often find the last part actually stops them ever attempting to do things that they have the ability to do, as the reasoning is often "if I can't do it perfectly, it's not worth doing"   As for projects... Ha ha ha, I still need to take the other half of my wall trim down in the Fiance's office so I can paint it. Need to finish digging and running the back yard drains, my R33, getting the Ninja bike registered (now being sold), the moped project, fixing either of the lawn mowers so they're reliable, along with a myriad of other things.   It's why I've been going through lately and just being brutal and clearing projects off that I won't actually ever complete. IE, moped will go to the tip, or be given away, bike is being sold, Subaru project being sold, some parts for other projects given away. Or I've been making myself focus on one thing at a time, by ticking off the smallest quickest ones first.   There's also a reason by our mid twenties we seem to be "know it alls", as we've all been down some of the weirdest and oddest rabbit holes when you follow the dopamine trail. It's often also why we're more a jack of all trades, but not a master of one.   However, pretty much all of my hobby projects, in one way or another, all come back around to automotive. That's my zen area.
×
×
  • Create New...