Thrust carrier height for npc7056-10 R33 gts-t

[Pattey21]

Hi guys,

Just order a NPC7056-10 (organic 300rwkw) for my r33 gts-t.

 

I also wanted to replace the throwout carrier sleeve and release bearing.

 

Spoke to Golbey who called NPC and said the 20mm sleeve suits the throwout bearing they supply however a stock sleeve height is 18mm.

Just Wanting to know what a working combo is with a new sleeve carrier and bearing whether I use the npc provided or a Nissan one.

Cheers

[wildeagle44]

I have used both stock nissan and npc supplied throwout with that clutch, both work no issue. 

Currently have the nissan bearing installed. Friction point is slightly higher up on the pedal, but again, no issues. 

[Pattey21]

2 hours ago, wildeagle44 said:

I have used both stock nissan and npc supplied throwout with that clutch, both work no issue. 

Currently have the nissan bearing installed. Friction point is slightly higher up on the pedal, but again, no issues. 

Thanks for your response. 

Did you purchase a new sleeve carrier

Like this one.https://www.efisolutions.com.au/thrust-bearing-carrier-sleeve-20mm-r31-r32-r33-r34

when you used the NPC supplied bearing as it supposed to be 20mm(bearing width)

Or did you still use your stock carrier sleeve for a R33 should be 18mm https://www.efisolutions.com.au/thrust-bearing-carrier-sleeve-18mm-r32-r33-r34-z33

Interesting you found the disengagement point higher for Nissan bearing as it supposed to be 2mm thinner than the NPC bearing 

[wildeagle44]

Have been using the stock r33 carrier the whole time. 

[GTScotT]

I've fitted many of these and have never changed carrier. Use your stock 18mm carrier.