Jump to content
SAU Community

Recommended Posts

Getting around to doing the much needed maintenance on my skyline. 

It's a 1991 R32 GT-R. I realized that it still has the stock shocks and pretty sure they're blown. Pretty bouncy in the rear and the roads here in TX suck. 

Is there a strut that can be interchanged with the stock ones. All I see when I look up the part  number on the strut is OEM from Japan for way more than I'd like to pay. For the price of 2 I minus well get some coilovers. 

Pic for reference with the part number: 

56210-05U0020190517_193615.thumb.jpg.5b4fe31d1b968398b5b1f032db6ba715.jpg

Link to comment
https://www.sau.com.au/forums/topic/477080-r32-gtr-rear-strut-replacement/
Share on other sites

Just now, GTSBoy said:

No non nonononononono.

Why use stock type stuff? If you wish to retain stock type, at least upgrade to Bilstein B6. Otherwise, there are a large number of excellent coilover options in the US, and here.

Or that, Haha. Coilovers are probably best, but depends on your budget

1 hour ago, GTSBoy said:

Budget is not a consideration. Anyone who owns an R32 GTR has already committed to spending the purchase price again every 2 years.

Not meeeeeee :D

 

OP, you should have local Koni and Bilstein options. Hell, if you have standard springs, throw some KYB dampers in and enjoy.

If you're after adjustability, spend the money on KW (unless you just want height adjustment, then you can get TEIN street, they're relatively comfortable and cheaper).

Nismo S-Tune is a good bolt in upgrade, KYB dampers and uprated springs. Dunno if it's worth the money though.

E.g.:

https://www.tein.com/srch/us_search.php?maker=NISSAN&carmodel=SKYLINE&modelyear=1989-1994&item=default

Yeah I didnt see the point in buying stock when they're almost the price of some good coils. I was just looking to see if there was some cross over stock rear struts I can use and get locally. I appreciate the feed back and the links. Actually seen some twins for about 900 the demon tweeks website has them for cheaper but I wonder if that's not including shipping. 

Teins have traditionally had very hard springs and dampers that may or may not have been appropriately matched. They have reputedly gotten a lot better in the last 10 years, but I'm still leery of them. Hell, even just 7(?) years ago I decided to go with modified Bilsteins and separate springs rather than coilovers. But these days, I would just spend the money. ~$2.5k buys you a hell of a lot of very well built coilover these days.

5 hours ago, Jjtxaz24 said:

So are the teins listed above a cheap alternative? Poor ride quality? Cant be worse than these blown shocks I have now. 

My friends 33 gtr came off the boat with a set of tein coilovers and if you told me it had some 4x4 fence post cut to size and stuck in there to hold the car up I would have believed it. The ride was so stiff you would lift out of the seat if you hit a dip in the road, after an afternoon out you were sore. I took them off the car and installed a different set a year or two ago but I can'r remember the brand off the top of my head.  Ive heard good thing about the fortune 500 coilovers with swift springs, built in the states so easy to get but I haven't had any first had experience.

Comparing used Bilstein in my Subaru wagon, the TEIN Street Basis Z is quite comfortable. Body control is overall on par (some positives, some negatives). For example, the short travel you can definitely feel, but the "softer" dampening controls bumps quite well even on 6kg/5kg springs. Considering the price, if you're after some standard replacements + lowering they are great.

Note that Street is different to the other TEINs, which would be rough as (e.g. the old ones that I had on my 32R).

It really depends on your intended use and how much you want to spend.

I'm not going to be tracking or racing the car. My use at the moment until I get the maintenance done and all the little things out the way will be just daily driving it and hitting up car shows. Cars not in rough shape but it does have its imperfections. Once that's done I can focus in the stuff I really wanna do and get a little more horsepower out of it.

The roads here in TX arent the best. Pretty rough in most parts. Suspension at the moment is super soft, well the rears are. I'm not sure how the GTR suspension is stock but it looks to be rear struts are Original and the fronts are some sort of coils. The level the car sits at is great though. Heres some pics. IMG_1374.thumb.jpg.95435d3b4c3609d09c80ae4ace263b61.jpg20190511_201631.thumb.jpg.f903d87517147e9ae636387d4f335c37.jpg

when I had it lifted off the floor see how droopy the rear suspension is? 

20190516_183557.thumb.jpg.5095cfafcaf97c7d54999169e1cf5714.jpg

 

  • Like 1

If you go Tein you really need the Mono tube stuff. The valving is far superior compared to any of the Tein twin tube stuff. I had Tein NR twin tube about 7 - 10 years ago and they were so shit, super hard, very bad dampening twin tube shock, way worse than stock GTR shocks. Got rid of them and went Tein Mono flex about 5 years ago and was completely amazed at the difference. Excellent twisty stuff control, compliant on rough roads, way more so than any stock Gtr, evo, sti or wrx suspension I've been in. Definitely better on bad roads than my 2001 or 2015 wrx's or my stock 33 v spec suspension. No problem with high speeds either, like 250kph+ on undulating highway roads (we had open speed limits then), and Mono flex is supposed to be track coilovers.

Stretch for some good mono tube based ones if you can afford it, the valving difference is worth it. If you just want to replace the blown shocks with something decent from Tein I'm sure the streets will be adequate enough, as it will still be better than brand new Nissan suspension, let alone stuffed ones.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Unfortunately haven’t taken pics yet after it was finished. All the edges are hemmed nicely, just had to cut holes for the gear shifter and seat bolts and seat belt bolts in the rear. The molds seem like they’re done with steam and a layer of glue on the underside to hold a bit of shape but still soft enough that it’s a good fit when it’s all pressed down.
    • When's the rear mounted turbo kit coming? Needs dose and V8 chop idle lol.
    • I was very unimpressed with how the car came up from the A pillar forward, before I hit things (twice). It all has to go. It had to go, but now it has to go... more. So we finally found the very first Shennanigans with the entirely perfectly setup engine that had no problems being pulled apart to improve on 'was perfectly fine'. Cam bearings looked a bit... stock. Which isn't entirely bad given they were stock and this is a ~20 year old engine. So new cam bearings are on the way because it's somewhat difficult to get to this stage to do it later, and it will trash the block. It was quite unusual that it wasn't done when the perfectly new-looking VCM cam was originally installed by [unknown] What IS unusual is the cam that was installed there was advanced SIX degrees. As to why there is no way to know.. however it could have been @Dose Pipe Sutututu's mate who wanted a larger cam sound but also wanted it to come on earlier to be more usable. This is my dyno sheet with the previous setup - This cam is not supposed to peak until 7000+ RPM, according to VCM. This is what lead me down the whole 'my heads/intake setup is running out of puff and can't support the cam' line of thinking to begin with. Anyway too late now - New cam is in! It could be rather funny if this smaller cam acts like a larger cam because it isn't advanced six degrees. In the spirit of everything is working amazingly - the COMP cam required no dialling in whatsoever. It was about 0.5 degrees advanced, which seems pretty bang on. Any adjustment either way would be further out. I'm told as a chain breaks in it ends up regarding back about 0.5 a degree as the chain breaks in, making it bang on. In the spirit of everything was previously working amazingly - The timing gear that was taken out turned out to be was an N-Motion double timing chain kit, with adjustable cam gear (which is how it was 6 degrees advanced) and all looks entirely perfectly new. It also had a Torrington bearing, which was one of the reasons I ended up getting the Cloyes kit which they used in the C5R 24 hour racecar - Because I couldn't confirm what was in the engine when talking to Tony Mamo. I did believe however it was a Double chain kit of some kind... but found no supporting documentation or evidence for it.
    • I recently did this to my R33 with the full set from Car Mats Direct, they can't do the vinyl anymore that's advertised on the website due to a supplier issue so I ended up with the Black Loop Pile which looks great. I went all out with rubber sound deadening sheets from Repco and also added the sound deadening foam layer option with the carpet. Makes a world of difference and got rid of all the weird smells in the 29 year old interior. It was a bit of work but I'd 100% recommend it, Car Mats Direct had awesome customer service and quick postage. Replaced my seats with some sporty ones from Autotechnia while I was at it, feels like a new car.
×
×
  • Create New...