Jump to content
SAU Community

Help me with my r33 gtst


Recommended Posts

Guest Slide

Somebody help me!!!!!!!!!!!!!!!!

I have taken my R33 to a number of stupid so called specialists and they have all given me different answers which have cost me nearly $2000.

On standard boost (7psi) it runs like new ,Anything over (i mean even 1 psi over) it pops not detonates. it sounds like it is backfiring.

it looses boost and it sounds like it is just feeding it out the exhaust. verrrry embarassing.

sound like it is farting. I am using a turbosmart dual stage boost controller (tried a different 1 already) 750hp fuel pump, ngk irridium plugs,fuel lines, injectors have been cleaned ,3'' turbo back exhaust, pod filter ect. I have tried tripping the computer did not fix.

Help Help Help (eeeger to run more boooost) i feel like popeye without spinach

Link to comment
https://www.sau.com.au/forums/topic/47752-help-me-with-my-r33-gtst/
Share on other sites

Sounds like boost cut to me.

How are you measuring boost? Boost cut happens at about 10psi or a bit over. The symptoms match pretty much exactly what you described.

You could get a boost cut defender but you're better off getting a full ECU replacement.

Guest Slide

anything after 7psi confussed everyone i sent my car to

people have said to me the following with reports.

1:change computer

2:change bov(i am still using factory plum back)

3:change boost actuator

4:change plugs (so i did)

5:fuel pump (so i did)

6:have injectors cleaned(they were left to recirculate for 13 hours)

have tried using tape over the coil packs to avoid shorts from faulty coil packs.

i have taken it to 2 places where i have said i am not paying unless it is fixed came back and they both said cant help you.

Someone please give me an answer.

I am a Gold Coast local.

Anyone know anything

If someone knows a servicer around my area please post

  • 1 year later...

funny, i always thought my car was spiking, but the symtops you show are exactly what im experiencing???, so its missing big time.

Im havnig the exact same problem mate!, anything over stock 7psi (or 1/2 way on the stock gauge), will start missing, feels like 100 times a second, and yes fartings a good word:)

just wondering if you've overcome the issue yet? do i really need a safc???

I think Robo is onto something... you need to get it dynoed and post up the A/F ratios etc... my bet would be its just running extremely rich and blowing out your spark... remember the closer you gap your plugs the weaker the spark gets (may help you fix the problem in the short term tho)

other than that if you reckon it is losing boost could you just have a boost leak somewhere that only become apparent when you go over 7psi?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would again like too thank Matt for his help in me sourcing the detachable hard top for the little red car, without Matt's assistance in inspecting it and locking it down, I can guarantee it would have sold before I could get up to see it,  and as that was the only available NC hardtop in Australia, I consider myself extremely lucky on multiple levels To say I'm more that happy would be an understatement And, it is 100% water tight, I drove through torrential rain coming back south, and by torrential, they type of rain that doing 40kph in a 110kph zone was a real thing, and even then, the standing water on the Hwy was deep enough to throw waves I'm also more than happy that the huge "BEASTS" that Matt calls dogs didn't eat me for lunch, I'm sure the sniffs and licks were more to "taste test" me, over being to friendly Now to work out what colour to get it painted, panel match, or gloss black........first world problems are real
    • Actually I might have figured out. Looks like there is a tab according to google images but it's hidden. Silly me.
    • No clips on this one like the other connector. Only that red tab that I can push slightly up.
    • For any loom connector that has an obvious release that resists pushing far enough to unclip, just spray some silicone lube into it. You might also benefit from using a bent screwdriver or small pick to push in the right place at the right angle.
    • Hey all, I went to try and fix my indicator not canceling, but I couldn't remove the clockspring cable under the column so I could twist that green thin. Anyone know how to remove this cable? I see this red tab but didn't have any luck. I was thinking of unscrewing it but wasn't sure if it would cause issues. I did notice for my indicator stalk, 2 out of 3 cables were plugged in but the last cable wouldn't fit in the stalk. I'm getting it's for fog lights. It was like this when I originally pulled it off.  
×
×
  • Create New...