Jump to content
SAU Community

Help me with my r33 gtst


Recommended Posts

Guest Slide

Somebody help me!!!!!!!!!!!!!!!!

I have taken my R33 to a number of stupid so called specialists and they have all given me different answers which have cost me nearly $2000.

On standard boost (7psi) it runs like new ,Anything over (i mean even 1 psi over) it pops not detonates. it sounds like it is backfiring.

it looses boost and it sounds like it is just feeding it out the exhaust. verrrry embarassing.

sound like it is farting. I am using a turbosmart dual stage boost controller (tried a different 1 already) 750hp fuel pump, ngk irridium plugs,fuel lines, injectors have been cleaned ,3'' turbo back exhaust, pod filter ect. I have tried tripping the computer did not fix.

Help Help Help (eeeger to run more boooost) i feel like popeye without spinach

Link to comment
https://www.sau.com.au/forums/topic/47752-help-me-with-my-r33-gtst/
Share on other sites

Sounds like boost cut to me.

How are you measuring boost? Boost cut happens at about 10psi or a bit over. The symptoms match pretty much exactly what you described.

You could get a boost cut defender but you're better off getting a full ECU replacement.

Guest Slide

anything after 7psi confussed everyone i sent my car to

people have said to me the following with reports.

1:change computer

2:change bov(i am still using factory plum back)

3:change boost actuator

4:change plugs (so i did)

5:fuel pump (so i did)

6:have injectors cleaned(they were left to recirculate for 13 hours)

have tried using tape over the coil packs to avoid shorts from faulty coil packs.

i have taken it to 2 places where i have said i am not paying unless it is fixed came back and they both said cant help you.

Someone please give me an answer.

I am a Gold Coast local.

Anyone know anything

If someone knows a servicer around my area please post

  • 1 year later...

funny, i always thought my car was spiking, but the symtops you show are exactly what im experiencing???, so its missing big time.

Im havnig the exact same problem mate!, anything over stock 7psi (or 1/2 way on the stock gauge), will start missing, feels like 100 times a second, and yes fartings a good word:)

just wondering if you've overcome the issue yet? do i really need a safc???

I think Robo is onto something... you need to get it dynoed and post up the A/F ratios etc... my bet would be its just running extremely rich and blowing out your spark... remember the closer you gap your plugs the weaker the spark gets (may help you fix the problem in the short term tho)

other than that if you reckon it is losing boost could you just have a boost leak somewhere that only become apparent when you go over 7psi?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...