Jump to content
SAU Community

R33 gts25t R32 gtst - COLD AIRBOX AND POD SET-UP

Team RaceworX

By Team RaceworX,
in Group Buys

 Share

Recommended Posts

  • Replies 99
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

  • 2 weeks later...
grandmasterb Grand Master

grandmasterb

Posted
Posted
Guys,

Is there a problem with oil getting into the AFM?

I have been told that it will ruin the AFM after prolonged use.

Is this true?

Yes after prolonged use it will go into the AFM but nothing a little contact cleaner and a steady hand can't fix. Dont want to kill the post but i have done signifigane dyno testing with air box's and found that a partition box with the air still accessible from the top is better than a completley enclose pod. The new Apexi filter is a non oil based filter and uses surrounding air from all area's. The Unifilter are a great product and i have used one in the past and the kit price is very well priced. But can i ask one question, why dont all you people who want a box make you own? It takes about 30 mins and cost ya about $20 :(

Duncan Grand Master

Duncan

Posted
Posted

yeah no doubt some people are cable of making their own shield, this is a great option for people who can't or don't have the time.

The other thing I should mention is that I have seen a lot of cars coming from jp with an old HKS pod or similar. Generally, they either filter really poorly or are well and truely ready for replacement. Support a locally made and engineered product instead ;)

grandmasterb Grand Master

grandmasterb

Posted
Posted
yeah no doubt some people are cable of making their own shield, this is a great option for people who can't or don't have the time.

The other thing I should mention is that I have seen a lot of cars coming from jp with an old HKS pod or similar.  Generally, they either filter really poorly or are well and truely ready for replacement.  Support a locally made and engineered product instead :cheers:

Couldn't agree more with you there Duncan, the ram pod should be one of the first things that people replace on there car when they first import it. Clean the AFM completly and then maybe look into using a non oil based filter from there. The Uni filter products are great and the contrstuction is top notch, if your in the market for a new filter guys take advantage of this buy as its a good price and a good product :headspin:

  • 2 weeks later...
Beer Baron Grand Master

Beer Baron

Posted
Posted

drinkan. can you help me out with a partition/box to suit my pod filter wearing 32GTR? do you still run the stock air box in your improved GTR? if not what are you using? :D

Duncan Grand Master

Duncan

Posted
Posted

Yeah unfortunately we have to use the standard airbox for Combined Touring and Targa :P.

pm sent re details of the 32GTR kit, we can get hold of these as well

Genesis® Grand Master

Genesis®

Posted
Posted

Hi Duncan, please send me a PM as well re details of the partition/box for a 32GTR. I have got the Apexi twin air pods setup.

thanks in advance

glenn

chrissso Proficient

chrissso

Posted
Posted

Just a quick note for those who already have a pod filter... I can get ABS blanks with a 90 deg bend in them... Got one for myself, because I have custom intercooler plumbing. I just need to shape it myself. If there is intrest, PM me. They are about $30 plus P & H. Probably less for group buyy.

Pics attached.

Chris

  • 2 weeks later...
petemillis Explorer

petemillis

Posted
Posted

A free bump for the Unifilter Rampod induction kits.

I'm importing these into the UK from the good folk in Hornsby. Feedback has been excellent. I'm running one on my own GTSt, and also replacement Unifilter panel filters in my Delica, and Unifilter in my KTM bike.

The oil from these will NOT contaminate the AFM. Unlike some light oils that other filter manufacturers use, the Unifilters are oiled with a tackified foam filter oil. When you re-oil the foam, you squeeze out as much oil as humanly possible leaving only a sticky surface on the foam. Mine has been on my GTSt for ages now and there is absolutely no sign of AFM contamination.

I have found absolutely no noticeable diference in performance between runs with an Apexi dual funnel intake, a Unifilter Rampod induction kit and running with no filter at all (just the Rampod with the foam removed). Throttle response with the Unifilter Rampod and heatshield is noticeably better than when running the standard airbox. I am running 0.95 bar of boost and I suspect that the standard airbox MAY have been a little restrictive as this is well over the standard boost.

The Unifilters will also filter out far more crap than any dry foam filter, metal gauze filter or paper element filter is able to. A dry foam filter will only filter out particles that are larger than the spaces through which air flows in the foam. Metal gauze filter will only filter out particles larger than the holes in the gauze, and the same goes for paper element filter.

By the very nature of foam filters that are oiled with tackified oil, particles down to just a few microns across are filtered out as they cling to the sticky surface of the foam, rather than being drawn through. The majority of aftermarket filters will only filter down to 45 microns. Engine wear is caused by particle sizes as small as 17 microns, and something like a Unifilter will filter down to just a few microns.

Re the heatshield - it's not an enclosed box, but rather a partition that diverts the heat away from the intake, and is open towards the rear of the passenger side headlamp. It will not therefore restrict the intake of air into the pod as the pod remains open to air in all directions - so no worries there.

Final point - I've got to say that the metal construction of the Rampod intake tube is far better than the moulded plastic Jap Crap that nearly everyone for some reason is totally fixated on. It's about time people started to reliase that better stuff can be had from elsewhere other than Japan, and are far more sensible prices. Over here in the UK, the HKS and Blitz stuff is costing in the region of £200 just for the intake. The Unifilter kits, coming halfway around the world, are costing not much more than half of that including the heatshield and all taxes and freight.

Sorry for rambling..........just think you al should think about stuff other than what modified cars have on them when they leave Japan.

  • 4 months later...
  • 2 weeks later...
9krpm Mentor

9krpm

Posted
Posted
Hi Duncan, please send me a PM as well re details of the partition/box for a 32GTR.  I have got the Apexi twin air pods setup.

thanks in advance

glenn

can I have a pm too?

Duncan Grand Master

Duncan

Posted
Posted

Hi Yogi, Unifilter only sell them as full kits, but thats good news since it gives you the chance to change your dirty, poorly filtering jp filter for a quality australian product :O

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      R32 GTR EV? The leaf of the Godzilla's!

      By Duncan · Posted

      I can't agree. If we hadn't all been brought up with the noise caused by the inefficiency of an ICE, no-one would actually ask for all that. An EV is like any other car, it just goes better. 
    • Duncan
      Neil's R33 Gts-t Build

      By Duncan · Posted

      2 more things I have to work out Easy one first...can anyone describe how to pull the fuel pump and sender from a 33? I can feel there is some sort of mount and clips but don't have a manual and don't know the trick......if not I'll spend some quality time in the boot witha lighter tomorrow. Second question is harder.  He had changed the upper plenum to a plazmaman but clearly got to a point with the vacuum hoses where he said "f**k it, I'm going inside for a beer" and never came back to that job because it was a mess. Am I right to think that I need: 1. Pre throttle (16mm nipple on inlet) to AAC's main 20mm fitting as the main pre throttle feed 2. ACC has a second 13m outlet joined to that 20mm fitting which I think is the pre throttle air supply for the cold start valve? 3. Cold start valve's outlet fitting then goes to Plenum (to bypass throttle?) There is some adapter on the back of the ACC with 2 fittings (13mm and 10mm), do I run the 10mm through a 1 way valve to the Brake Booster (4) and the 13mm back to a 13mm nipple on the Plenum as the Idle control (5)? 6. Run a 6mm vacuum line from the Turbosmart BOV to the Plenum? 7. Run a 5mm vacuum line from the Fuel Pressure Reg to the Plenum? 8. Run a 5mm vacuum line from the Turbosmart Boost controller to the Plenum? (Wastegate already has a pre turbo pressure source running to the solenoid then the wastegate on the other side of the bay)  Any help appreciated, the GTR is quite different setup and while the Stagea also has FFP it is different again. (And no Dose, I'm not pissing it all off and putting a ethrottle on it....)
    • Duncan
      Neil's R33 Gts-t Build

      By Duncan · Posted

      OK, onto some questions to try and speed up the process a little. Does anyone know what core this Garret is? I know it is a high flowed standard turbo but nothing else about it. Tag says OK 0169J - 446179-5032 Same question for the injectors, I don't know what they flow and ideally can work it out before it hits the dyno, they are a mustard yellow side feed
    • Duncan
      Neil's R33 Gts-t Build

      By Duncan · Posted

      Quick side trip into the engine externals, alternator and PS were in place including tensioned belts, but the PS was dry (my guess is he had the steering rack reco-ed). Filled it up with Transmax Z but it will need more bleeding once the engine is running no doubt. BTW I've said before, I don't know what kind of soft animals you have in the city, but out here they breed the rats tough. I bet they were disappointed when they tasted synthetic ATF.... Coilpacks are Splitfires with a factory loom in reasonable condition. I didn't pull one put I bet the spark plugs are new as its a new engine
    • Duncan
      Neil's R33 Gts-t Build

      By Duncan · Posted

      Onto intake pressure test. I have a Raceworks (damn brand thieves!) pressure test adapter that lets you apply pressure through a standard tyre valve and comes with a pressure gauge.....I just blocked off the other end immediately before the throttle body. Applied 30psi....and the turbo intake immediately popped off with a bang. Sorted that but it was still leaking, turns out there is a pinhole leak at the BOV adapter that I'll have to find a local place to TIG up. I'm sure it makes SFA difference with such a small leak but I want it to be right. Everything else up to the throttle body was good. Also cleaned and oiled the KNX cone filter, and this is the AFM if anyone can identify it (car runs a PowerFC)
×
×
  • Create New...