Jump to content
SAU Community

Recommended Posts

the JMS r33 dyno at autosalon is totally incorrect, no NOS, just a big time bodged figure. Somethin went wrong with the dyno. The JMS car is actually capable of aroun 320rwkw, ask WIPLASH the current owner. Also I believe JMS always run there cars with Toluene, so that disqualifies them straight away id say.

yeah that JMS dyno done at autosalon was a little fake, around 330rwkw as said.

around 380rwkw would be the max a rb25 has done, obehaves fiqures are believeable looking at the setup and times achieved, but i no longer believe many dyno figues published due to the large differences at different places.

Ill get back to you in a few weeks, mine should top just about all

yeah that JMS dyno done at autosalon was a little fake, around 330rwkw as said.  

around 380rwkw would be the max a rb25 has done, obehaves fiqures are believeable looking at the setup and times achieved, but i no longer believe many dyno figues published due to the large differences at different places.  

Ill get back to you in a few weeks, mine should top just about all

There is an R32 GTSt being put together in NZ with an RB25DET motor at the moment which is a "street car" - is running a VERY high mount TA51 on it, I suspect that should be able to get out of the 300-400rwkw zone :wassup:

INASNT with standard internals and no decompression - 320 rwkw. Does have a mighty turbo on it and engine management. Maybe he can give us the rundown on the rest.

Yep that was a few weeks ago on Selectamaz dyno in epping with GT3040 and 1.4 bar boost with 98 ron fuel which was sitting in my tank for about 2 weeks.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes...but look at the numbers. There is a tiny tiny fraction of the number of Joules available, compared to what is used/needed. Just because things are "possible" doesn't make them meaningful.
    • Thanks for taking the time to post that ! If anything changes or happens please do update us. 
    • Somehow Vertimass/Oak Ridge National Labs has figured out a catalyst that can convert ethanol into C9-C10 hydrocarbons in basically a single step without ending up with a bunch of ethylene or similar waste products: https://patents.google.com/patent/WO2023224867A1/en I still don't think anything like this will keep us from needing to transition to EVs regardless along with all kinds of other electrification, but things like this will go a long way towards alleviating the problem of how to electrify things like planes. Renewable diesel is seemingly an easier problem as well, Chevron is already running refineries for the stuff and the primary feedstock is tallow and other waste fats from agriculture.
    • Ok so I have sorted everything with my uniclutch and  i can offer up a bit of feedback and some things that might help others.    I found problems with factory damper line. Weird shit and had trouble with peddle adjustment    I used this https://au.gktech.com/products/r33-gts-t-skyline-braided-clutch-line?_pos=2&_sid=22b01b9b9&_ss=r Also when adjusting peddle leave a bit of play. You can get into a over stroke condition easy.. Make sure you can push the slave forward after adjusting to confirm fluid can return to master then you will need to pump it up heaps…..not sure why but that’s how it is.    last thing the splined adapter is machined perfectly. If your input shaft is old like mine was I would put a bit of valve grinding paste on it and stroke it like a 15 year old. Just to give it a tad more clearance and to better match it to the spline.    reason is on a near flat shift I have had situation where the peddle returns a millisecond after you lift from the clutch. No slip or anything but I reckon this is due to tolerance on the spline being way tighter than stock clutch and binding for a sec. I think this will go away but also my spline was old. Box is old so I guess I should have checked better. It’s a super neat fit.    it feels light as and holds awesome without any noise    
    • My Fuga Hybrid is JDM, 2014 model but very similar to the V37 from the looks of things..same platform just physically larger and very comfortab;e
×
×
  • Create New...