Jump to content
SAU Community

Recommended Posts

On 23/08/2021 at 7:24 PM, Ben C34 said:

How many microns is the stainless filter? Just saying micron makes no sense.

Im actually not sure. I've never thought about it as it came with the car and I honestly never really cared that much until now.

I'm assuming it's 40 microns, but I am actually not sure. I'm investigating if I get a new mesh so I know for sure. Or if anyone has any other options on appropriate fuel filters. Definately something I am not ignoring now

Actually thinking about it logically, it could also just be the wideband sensor acting up...

I've heard they start to read lean as they wear out.... It's not overly old (about 18 months) and hasn't actually done all that much milage (2,000kms tops) but I guess it has had a hard life being on the track

Actually thinking about it logically, it could also just be the wideband sensor acting up...

I've heard they start to read lean as they wear out.... It's not overly old (about 18 months) and hasn't actually done all that much milage (2,000kms tops) but I guess it has had a hard life being on the track

I've had one for years (mounted near the cat, which is where they say to mount them, NOT the dump)

Wideband AFR is only one measurement, presumably injector ms has not changed.

I also had scenarios where as Ben is alluding to, one filter was blocked, and the previous one wasn't.

I.e Ryco into 25micron filter into the 10 micron filter buckets on the injectors themselves. One or more of these may be clogged/acting up and if your filters aren't fine enough, it'll be your injectors.

And if your filters are too fine, you'll be constantly changing them. Cars are fun. I noticed this pretty much any time I changed from 98 back to E85 I'd have this issue but it could easily be some clog in my system that gets stirred up from changing solvants and not a general problem affecting everyone :P

Just got the injectors back, there was no issue with them, they all flowed the same and the pattern looked good.

The fuel filter looked good. I'll probably pull the pump this weekend to check the sock.

However, I'm now 90% certain its a failed Wideband. The guys who did the install when I got the new ECU put in just swapped the old o2 sensor for the wideband. Might organise to get a new bung welded in before the cat. 

The mystery just got interesting. Pulled my wideband sensor and it actually doesn't make sense. I have a new Haltech WB1 yet the sensor in the engine bay is a LSU4.2 sensor. This may explain why the sensor always gave me some very weird readings...  

Not sure why someone would put this sensor in... Hopefully was just a mistake. Have ordered a new LSU4.9 sensor 

 

The fact that there is a sensor in the engine bay is alarming enough when it comes to widebands, but the 4.2 is more sensitive than the 4.9 in that aspect (apparently).

My 4.2(s) has lasted a very long time mounted in the specific manner they request to be, which is on a certain angle, and at least (!) 1 meter away from the exhaust manifold.

If it's in the dump pipe in the stock O2 location, in a dump, 20cm from a turbine housing, expect to be periodically replacing these.

  • Like 1
  • 2 weeks later...

still waiting on my new wideband sensor. Sapresbox are taking forever, looks like they didnt have any stock in the country and mail is taking forever these days!  When it arrives i want to get a new bung welded in further along the dump pipe.

Ive been doing a few small jobs with the car since we are in lockdown anyway. Moved the oil cooler to a better position, got a taarks oil filter relocation kit to get the oil filter in a better position. 

Also ordered a 3qt Accusump that I want to pop in the boot. Was only $385 on Amazon (with no valve), went back to $450 shortly after i ordered. I'm thinking i will just run a manual valve rather than the electronic one.

  • 2 weeks later...

So got the new wideband, turned on the "auto tune" on the ecu and it was all looking good. However, I did strip a knock sensor and then started looking through the ecu. Watched a few hp academy videos and realised my ecu had a few glaring issues (such as the flex fuel sensor being disabled)

Anyway I lost a bit of faith in the tune after that as there were a lot of little issues (which may have been fine, but I didn't feel comfortable anymore).

Went to a new workshop, Glen at ESP was amazing, really nice bloke and I feel actually cared about getting the right result.

He did swap my knock sensors to the Bosch donut type sensors, I know it's not 100% needed, but it's cheap and adds a level of insurance. 

Also got a clutch switch put in for flat foot, rev match, launch control etc.

Car is running well and without ANY engine mods at all the car has gone from making 305kw atw at 25-20psi to now making 330kw are at 18psi... It's night and day different! Very very happy!

Scan23092021203301_001~2.jpg

Glad you spent sometime reviewing yourself, reading your thread again I am confused why the tuner would say the adaptronic modular has no can capability because it definatly does. Sounds like you have found someone with their head screwed on to support you rather than just sell another solution and fail to set it up properly.

Looks like it will be heaps of fun to drive.

  • 5 weeks later...

Some bittersweet news. Sold my skyline today. Got an offer I couldn't refuse :(

Am planning on getting either a F30 335i or F20 M135i to replace it.

Loved this car and love the community on here. Will be very sad without it!

  • Sad 4

So I'll be that guy - what was the offer? Given what you're replacing it with it gives a rough indication of course, but I'm sure many enquiring minds want to know what offers exist about now.

  • Like 1
  • Haha 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hello all I have 2 r34 sedans , one turbo one na, only recently aquired the na 34.  Man what is with these things.... My turbo 34 started sounding like a super charger, it was screaming at anything above 4000rpm , I took the alternator apart and replaced the front bearing which is the only one I think you can access and it did not fix the issue so presumably the bearing in the rear of the alternator is gone. ( diagnosed it was the alternator by taking off the aux belts one by one to figure out which pulley or bearing it was )  My friend gave me one he had lying around, Installed it , it did not squeal for maybe 500kms and now its started to squeal again briefly on startup  Recently got an na r34 and I replaced the timing belt, water pump + all the auxillirary belts. Runs amazing but it suddenly developed the same squeaking problem but significantly worse, Ive had my neighbour come down screaming at me because it was waking her up everytime I moved the car. It takes a good 2 minutes before it quietens down.  Im yet to diagnose where its coming from but im fairly sure its coming from the alternator aswell. My question isnt about how to fix it but rather where can you get a new alternator for an rb25 neo??? Ive searched everywhere but I havent been able to find a direct fit oem type replacement thats not genuine. All the automotive stores sell an oex one - BXA035 - which I picked up for cheap through a friend with staff discount , got it home only to find the connector is completelty different.... As far as im aware bxa035 is for rb20/30's and after a bit of figuring out the bxa035 has an ev14 type connector, which is tiny compared to the rb25 connector. I actually had an ev14 connector lying around which I was considering just replacing the bigger plug with to get the alternator working but the bxa035 is rated for 70amp vs the rb25 alternators are 90amp ( or so ive been told ? ) That paired along with the fact im about to install an amp + sub in the back and I have the stock sized small battery Im not sure itll do the job unless anyone has another opinion?  I know and have seen all the websites selling the ls1 alternator conversion kit but I am not going down that route, nor do I have the money to. Hopefully I can figure out how to get 2 brand new alternators for both cars. I would buy second hand which there seems to be many of but considering how common this seems to be im sure If I installed a second hand one it would start squealing in no time  Or even better if anyone knows how to fix the issue directly with the alternator itself... Any input appreciated Thank you     Link for bxa035 connector picture
    • As above, replace as many as you can afford. If anything, due to old age.
    • Can confirm previous shop that built my motor had no fking clue about oil control and caused my motor to shit itself after two track days. Current shop, Birrong Automotive, has managed to build me a motor, not to mention, has also let me tune it myself and it has yet to blow up after 7 track days. Great oiling success, yashimash.
    • It definitely seems like you have no beef, with only digging up a 5 year old post, to comment on an inflammatory item with total insensitivity, and of which had nothing to do with the thread.  Yep, you definitely seem like a great person and your friends and family would be so proud to know of your lovely actions
    • Thanks buddy, so happy to be back! Managed to pickup a Unicorn R34 completely stock and clean. Looking forward to adding some goodies to it and posting one here. I'm shocked that so many forums stopped. If you could find my old profile - I'd love that if its possible. My old account was JET200GT. My email might need to be fixed too. To use this one. I think it was the same though..
×
×
  • Create New...