Jump to content
SAU Community

Can no longer move the Auto Shift knob on R32 GSTS

Strexx
 Share

Recommended Posts

Strexx Enthusiast

Strexx

Posted
Posted

So I just bought the car as a project - Have driven it successfully a couple of times but now I cannot move the auto shift stick out of Park - Foot on the brake turn the steering wheel and still no go. Quick Google search would imply the issue is electrical - Could I assume a connection/plug is faulty or I may have popped a fuse? Can you give me any advice how I may got the car to drive again or identify where the fault may be?

GTSBoy Grand Master

GTSBoy

Posted
Posted

Download the R32 GTR service manual and look for the GTS4 auto wiring in the wiring diagrams (will be the same as what you have). Look for the shift interlock and start tracking it down from there.

There is a manual release on these things, I think. Don't remember where it is though.

Time and excuse enough for a manual conversion if you ask me!

Strexx Enthusiast

Strexx

Posted
  • Author
Posted

It seems that none of the fuses have popped... A bit more digging around and it seems that there are two contact closure switches atop of the brake pedal, one for brake light the other for the shift lock.. However when I got under to take a look - I found the Shift Lock Release Button hidden out of sight on the lower back of the shift knob. So now at least I can drive the car - I'll get a torch under the dash tomorrow. Thanks

gem_ute Newbie

gem_ute

Posted
Posted

Had a similar issue on my 34. There is small black plastic clip in things that the plunger of the switch contacts with that break fall out. (There are a number of posts about brake lights staying on - same issue) I had both fail within a week and i just put 2x 1/4 inch zenith bolts in as the head thickness of the bolt just happened to be the same as the plastic thing.

Might not be the same issue but worth a look. 

  • 1 month later...
Strexx Enthusiast

Strexx

Posted
  • Author
Posted

Still have this problem - But I have found out more info.  So to recap, the shift lock was not allowing me to move the Tbar - this was very frustrating as I had to use the unlock button every time.  Then I left the car for about two weeks whilst I replaced the steering rack and when I lowered it down to the ground the TBar worked - In fact it worked for about 3 days then it locked again....It remained locked but today I jumped in the car and it remained unlocked all day - been pushing it back and forth and it will not fault.  I did jump under the dash and took a look and fiddled with the switch above the brake pedal (Mind you my brake light are fine) and found nothing.. So the fault remains intermittent - Can anybody tell me what it possibly could be that is causing this issue. Doing my head in!

  • 3 weeks later...
Strexx Enthusiast

Strexx

Posted
  • Author
Posted

Update - Replaced the switch on the brake pedal and the t-bar remained unlocked - I could hear a clicking sound at t-bar but that sound has since gone and the T-Bar remains locked up again - This is doing my head in - any ideas?

Strexx Enthusiast

Strexx

Posted
  • Author
Posted

I know I've posted this before but I'm struggling to get a solution - I have an intermittent fault whereby the T-Bar shift remains locked and the only way to allow me to place it in a gear is to use the front manually shift lock button.  Sometimes it works fine and sometimes it doesn't.  I've replaced the switch atop of the brake pedal and thought that that fixed it but it did not. After replacing that switch I remember hearing a click on the solenoid at the T-Bar but that has since stopped and the T-Bar remains locked continuously.

I've checked the fuses and nothing has blown.

Today I opened it all up and did not find the solenoid stuck (See photo (with hook)) so I simply unscrewed it from the mechanism and taped it aside. Now it never locks - it can't. So I made the assumption that this particular solenoid must be broken and I should go buy a replacement. I'll try to buy both solenoid (3470 Select lock - Shift lock) & switch (34980 Switch Assembly - Park Position) - This seemed the most appropriate way forward. However, whilst search through E-Bay tonight I came across a Shift Lock (2854001U02) and I'm trying to understand where this fits in and the likely hood that this item may also be part of the problem. Where is it located?

So although the issue is resolved it not a true fix - and that's what I'm aiming to achieve.

Any ideas would be appreciated.

20191125_094742.thumb.jpg.e3548abfb26c0c4d0e86a3760355c045.jpg1603916885_DSC_7343Medium_zpstbendzff.jpg.24000fb86178c4a0d2d3849beeb2f0b2.jpg

GTSBoy Grand Master

GTSBoy

Posted
Posted (edited)

The shift lock is the control box and beeper. It sits above your left knee/shin.

As soon as you f**k off the auto trans and convert to manual you can unplug it, like I did.

Have you considered spraying the inside of the solenoid with some brake-kleen or similar solvent, followed by some silicone or teflon spray lube?

Edited by GTSBoy

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • drifter17a
      R34 gtt rb25det neo timing belt kit

      By drifter17a · Posted

      So now doing the change and first time dealing with rb so little nervous giving engine power and potential for screwing it up When you align all marks and then remove crank bolt, timing move little I assume you can put the bolt back in once you have removed the pully to get timing to where you want?   here is pic of my both intake and exchust cam aligned, depending on angle you look they seem to be either aligned or a half tooth or so out. Any thoughts? Should you angle your face and look at each mark that way as if looking straight rather than from above as it can be misleading   <a href="https://ibb.co/ZpnhcvbF"><img src="https://i.ibb.co/HfWrGR9b/IMG-4447.jpg" alt="IMG-4447" border="0"></a> <a href="https://ibb.co/4wm2wn4q"><img src="https://i.ibb.co/JWBqWwr1/IMG-4445.jpg" alt="IMG-4445" border="0"></a>   https://ibb.co/ZpnhcvbF https://ibb.co/4wm2wn4q
    • sunsetR33
      braided lines for the turbos

      By sunsetR33 · Posted

      Thanks for the reply @GTSBoy Haven't really thought of that yet, but you are right. If the hose was damaged it should be absolutely pissing by now. I'll put some heat sleeve around it for good measure since I'm already removing the line anyway.  Maybe I'll put on some of the stock hardlines if I ever fully remove the turbos again. Maybe when T51R modding the compressor housings? Might be a fun mod on GT28s for that "fake single turbo" effect.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 1: I did some work on the car already before finalizing this post and my "issues" list. I dropped the Tomei exhaust in favor of the HKS Hi Power Silent. Sounds nice and I can actually hear myself think now. Also gives me a realistic chance to legally drive without silencer inserts. A bit of cheating was necessary to still be able to mount the Top Secret style diffuser. Some malusage of washers and a bit of "convincing" toward the brackets and exhaust hanger seemed to do the trick. The shaky steering wheel has been resolved as various suspension components were worn, like sway bar bushings and link bars. Most notably the two steering tie rod ends. Had some trouble finding bushings because my sway bars are not OEM thickness, 23.x up front and 27 rear. But non adjustable, so no aftermarket I suppose. Maybe they are nismo units? Turbo oil drain hoses were definitely still the originals and are new now. Wasn't the cause of the turbo oil leak sadly. Currently removing the rear turbo because of it, I suspect the braided oil feed line is the culprit. This issue needs to be dealt with so I can work towards actually getting the turbo setup legal and inspected. Two new issues to add to the list as well. Rear Main seal is probably leaking. Time will show how bad it is, I don't really want to drop the gearbox right now just for the stupid seal. Could fix a few other things in one go once I do that. Front right driveshaft grease is going past the cv boot, so at some point I'll fix that too.
    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      Ok so no 4cyl clutch... Yeah it is a factory manual. So if iam correct i need clutch and flywheel too? I can use something that suits something like R32 GTST?   EDIT: https://www.ebay.com/itm/224291042776 Is this ok?   EDIT2: i maybe forget to mention this(dk how important it is) but the trans will be behind RB25DET NEO(iam doing swap) It will be there for a little while. Iam planing to do bigbox or BMW tranny..
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      You're probably right about that one. Thanks for your suggestions, I hope I don't need a new 3rd brake light. Although wiring issues might arguably be worse. Right now I'm in the midst of a turbo removal because of my oil leak, other problems are going to have to wait for now.
×
×
  • Create New...