Jump to content
SAU Community

Trump Cancels CA's Emissions Standards = Skylines for All?


Recommended Posts

As some of you may be aware, trump ended CA's waiver to have its own emissions standards above Fed law. I don't know all the details and it sounds like a big legal fight to follow but does this mean CA folks only need to follow federal rule for importing 25+ year old cars? No $10k fee for CA compliance work? No obd2 requirement? 

Just wanted to start the conversation! I'm not sure if the changes impacts all CA's own laws or if it's only for future rules like the increased fuel efficiency standards for new cars... 

 

BBC News - Trump strips California of power to set auto emission standards
https://www.bbc.co.uk/news/world-us-canada-49746701

This will last as long as the next election when the Dems finally convince enough of you lazy arse Yanks to vote in your elections to kick his orange arse out of Washington and back to prostitute infested backrooms in Eastern Europe where he belongs.

  • Like 3
25 minutes ago, GTSBoy said:

This will last as long as the next election when the Dems finally convince enough of you lazy arse Yanks to vote in your elections to kick his orange arse out of Washington and back to prostitute infested backrooms in Eastern Europe where he belongs.

Aww come on mate, don't hold back, say what you really feel.

  • Haha 1
55 minutes ago, GTSBoy said:

This will last as long as the next election when the Dems finally convince enough of you lazy arse Yanks to vote in your elections to kick his orange arse out of Washington and back to prostitute infested backrooms in Eastern Europe where he belongs.

Yeah agreed with Rusty lol.  I actually echo what you're saying but I take the initiative to vote even while living overseas but there are a lot of lazy ones out there.  I don't have much faith lately so we could see Trump remain in office another term.  We'll see next November.

That all said, even assuming this lasts until Jan 2021 when the next presidential term starts, that's a pretty decent loophole in to get some series 2 GTR's and 1996 ITR's in and save people a ton of money on compliance work!  I don't know how it will play out in the courts but shoot if I can catch the loop hole I may send over my series 1 now and save $10k on compliance work or pick up a series 2.

Agreed.  The new cars, sure I am ok with them trying to reduce emissions, but for the handful of folks who want to import a 25 year old car (should be 15 like Canada if we're going down that road), let us just abide by the fed law.  I sold my bnr34 because of this and switched to a series 1 BCNR33. (1996+ is a no-go cause of OBD2 requirements in CA...that's a whole different story though).  I'll still have to pay $10k for CA compliance work though.

I would not count on the federal government being able to do anything for you in particular, this is mostly a fight over CA's new car emissions requirements (LEV III by 2020) + ZEV marketshare from 4.5% in 2018 to 22% by 2025. The EPA doesn't regulate direct import beyond the 21 year rule for EPA compliance, other states have 25 year rule for smog exemption. CA's smog check is by far the most draconian but there's nothing really stopping them from requiring smog check every 2 years for all cars made after 1976. 1994-2003 emissions standards are also the same for both CA and federal, tier 1 limits are identical. The federal government and CA are on the same page here so really the state is just enforcing federal law by requiring you to meet tier 1 emissions.

Federal law also mandated OBD2 in 1996 so technically CA is just enforcing federal law again. It's just that other states aren't interested in doing so due to time and cost constraints.

Don't get me wrong, I would love to import a series 2 or 3 instead of a series 1 but I think it's important to be realistic.

Forgot to mention this but keep in mind that the EPA technically does not allow you to modify any emissions control systems in a car regardless of age. EGR deletes, decat, DPF delete, SCR delete, smog pump deletes, thermostatic air cleaner delete, evap delete, etc... are all illegal in the US. The only reason why anyone gets away with this stuff is because the state they live in doesn't care to actually enforce the law and the federal EPA doesn't have the resources to chase down individuals like this. California doesn't even enforce these laws in some counties, if you live in a very rural area smog only happens upon sale.

Personally my assessment is even regardless of enforcement, we should be mindful of the emissions that gasoline engines produce. Unburned gasoline vapors are acutely toxic in high concentration and carcinogenic at lower ones, NOx damages your lungs, PM2.5 gets into your brain and can cause early onset dementia, and carbon monoxide is pretty universally understood to be bad for you. Keeping catalytic converters on does not cost as much power as it might seem.

Edited by joshuaho96

Hi Josh, thanks for all the info there.  I didn't know the Fed mandated OBD2 in 1996+ so then yeah there would still be no way to get a car in through CA.  I just got my series 1 that I already love so all is good.  I was just thinking it would have been a good opportunity to bring over a car and save some money on compliance work.  

That PM2.5 stuff is real.  It comes over here in Japan from China and leaves a yellow dust everywhere.  Super gross stuff.   

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I’m only posting this cause I thought I had seen a bad review on these somewhere before. Any feedback? Would you guys recommend that if I do buy these I send em to RC to have em checked before installing. Or any other suggestions?   https://www.ebay.com/itm/114009965865?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=JDl-15yLQ8C&sssrc=4429486&ssuid=QTzlFXB1S-S&var=&widget_ver=artemis&media=COPY
    • They see me rollin' they hatin'....... Took me most of the day to make the necessary mods to the mounts to make them fit the car.  Fortunately I was able to just use the mounts that came with the rotisserie. The rear ones are really secure, the front I feel i might reinforce a bit more as it doesn't seem like enough attachment to the vehicle. I'm sure it's fine but better to be safe than (extremely...) sorry.  I drilled and tapped thread into additional M12 holes to each car mount where it attaches to the rotisserie as an extra fail-safe. Without them the side to side movement is just restricted by the allen head pinch bolts, nothing actually goes though the beam. Does now! I still need to adjust the rotisserie to get the car centred in terms of centre of gravity. If it's too high or too low relative to the rotational centre line of the car, it will be like a turtle and roll onto its back or as it currently sits, I dont think I'd be able to rotate it as it sits as it needs to lift the whole car up as it rotates. Ain't happening... I'm going to be nervous as hell the first time I go to spin it on its side...    
    • Oh yes done this when the window started flopping around.  Turns out the guides that run along the rail chanel had crumbed way. Took off the door card and pulled out the window mech, then the window, which you have to pull out through the top. As said unbolt the guide rail and don't spend 30 minutes getting frustrated trying to find a way to slide it out upwards cause that don't frigging work. Drop it down and out through the door hole. All I did to repair it was slice some 10mm clear plastic tube, vertically, then screw it to the guide rail both sides. This tubing rolls inward on both sides and leaves a gap wide enough to hold the window. To finish all I did was lube the plastic tube with olive oil and Bob's your uncle . . . well if he has the operation he can be your Aunt ! !  10 bucks in plastic tube and another 5 minute job done again . . . . YEH BULLSH#T ! My love for Skylines knows no bounds !
    • So was there a solution to this problem? I’m having this issue now. 
    • not expensive, just irreplaceable if you don't go sub 60 at wakie in that thing people will start talking
×
×
  • Create New...