Apexi power fc

[FR33ZE]

i am just curious of the power fc i just wana know if the power fc is plug n play or u have 2 wire it up?

[Jimbo2000]

yes p+p

[GunMetalR33]

NO wiring, Search For PFC it has been convered lots!

[Bl4cK32]

P+P - BUT it needs to be tuned....

[FR33ZE]

do i have 2 tune it strait away and what about boost controling wat do i need 4 it or does it come with the kit usually

[Jimbo2000]

boost kit is extra

there ARE base maps that come with the computer but they're not very good,( for jap petrol) so yes you can drive it to a dyno but its probably better just to let them chuck it in and tune, takes all of 2 minutes to plug

[GunMetalR33]

I drove mine around on the base map for a while and there were no probs. BUT I took it very easy becuase you dont know if its gonna lean out or not. If you are going to use a bleed you will need to go into the etc menu and turn off the boost controll from there otherwise you car wont start or idle right.

[FR33ZE]

so what will run with a power fc (boosting)

[Jimbo2000]

[GunMetalR33]

so what will run with a power fc (boosting)

WTF?

OK, If you install your PFC without the OPTIONAL BOOST KIT then you will have to tell the PFC that you do not have the boost kit (done in hand controller menu) and the car will boost up to stock psi levels (7psi)

NOTE: If you dont have a hand controller then you cannot tell the PFC that there is no Boost Kit and your car wont start...

Your 2 other options are:

1) Buy a Bleed valve or EBC and tell the PFC that you dont have the boost kit

2) buy the boost kit for the PFC and use the hand controller to set boost levels.

I would suggest number 2... Unless you are strapped for cash? (you can get a bleed for about $50)

[FR33ZE]

man i have the hand controller i am wondering if the i can boost it with the plain ecu

[drunkenmaster]

No. It is an EFI computer, not a boost controller.