hardsteppa Posted October 7, 2019 Share Posted October 7, 2019 so have finally finished putting the box back together, but now it's all assembled and housings are back on, I have an issue where it's locked in 4th gear constantly and will only turn by hand in 4th or neutral, but the whole shaft turns in neutral, not just one end. It selects all gears fine but won't turn in any other gear. Before I put the housings back on I confirmed all gears select and shift as they should and all turn accordingly with the gear selected, but once the front housing is back on, it locks up. I stripped it back down to make sure hadn't made any error in reassembly and the syncros bearings etc all sitting as they should, and everything was fine but as soon as the front housing went back on, it locks up again. I haven't filled it with any fluid yet so I'm thinking maybe is there too much friction on the 4th syncro when it's dry? (although I did put a little grease on it on it when reassembling for the 2nd time, hasn't made any difference). This box was a 2nd-hander off gumtree so I never actually used it myself to know of any issue with it prior. At a standstill with it now so, ideas are welcome. Link to comment https://www.sau.com.au/forums/topic/478869-rb25det-gearbox-rebuild-issue-4th-gear-locked/ Share on other sites More sharing options...
BK Posted October 7, 2019 Share Posted October 7, 2019 Definitely sounds like 4th synchro is not letting go. Usually some oil squirted there fixes it and sounds like you're onto it being a dry problem. Have seen that happen on our boxes, and have had calls about boxes doing that with new sychros we have supplied. Link to comment https://www.sau.com.au/forums/topic/478869-rb25det-gearbox-rebuild-issue-4th-gear-locked/#findComment-7917305 Share on other sites More sharing options...
hardsteppa Posted October 7, 2019 Author Share Posted October 7, 2019 Thank you once again for your help. I was going to give it a part-fill before putting it back in the car and give it a thorough turning over to get oil over everything; hopefull does the trick. Link to comment https://www.sau.com.au/forums/topic/478869-rb25det-gearbox-rebuild-issue-4th-gear-locked/#findComment-7917309 Share on other sites More sharing options...
hardsteppa Posted October 8, 2019 Author Share Posted October 8, 2019 and, yep good as gold now it has some oil in it. Link to comment https://www.sau.com.au/forums/topic/478869-rb25det-gearbox-rebuild-issue-4th-gear-locked/#findComment-7917357 Share on other sites More sharing options...
BK Posted October 8, 2019 Share Posted October 8, 2019 Thought so new kid ? good stuff ? Squirt some actual oil around the sychros next time you do a box and I bet it'll never happen again to you. Link to comment https://www.sau.com.au/forums/topic/478869-rb25det-gearbox-rebuild-issue-4th-gear-locked/#findComment-7917361 Share on other sites More sharing options...
BK Posted October 14, 2019 Share Posted October 14, 2019 Hey mate on a more serious note, please tell me you used Threebond 1207C sealant on the bottom three front cover bolts and NOT threadlocker (or even worse nothing) ? Had to pull my dog box out of my 32 on the weekend, after the one box we didn't do ourselves and outsourced pissed oil out of the front cover. Noticed a slight drip under bellhousing and though fcuk, they didn't did they ? Found this as expected... Pretty annoying to pull a box out to reseal 3 bolts, but said transmission specialist was very apologetic after I showed him the stuff up. We didn't check front cover before install, but why would we ? It was done by a very experienced transmission specialist that knows what they're doing, so it can and does happen to anyone. It is in the Nissan manual after all so no excuse.... Check, check, check Link to comment https://www.sau.com.au/forums/topic/478869-rb25det-gearbox-rebuild-issue-4th-gear-locked/#findComment-7917706 Share on other sites More sharing options...
hardsteppa Posted October 15, 2019 Author Share Posted October 15, 2019 Fk i knew i forgot something!!......which was, to get milk ? Gearbox is in, sealed up tight and running sweeeeet. Link to comment https://www.sau.com.au/forums/topic/478869-rb25det-gearbox-rebuild-issue-4th-gear-locked/#findComment-7917777 Share on other sites More sharing options...
BK Posted October 15, 2019 Share Posted October 15, 2019 Awesome then ! Hopefully the milk you picked was the 100% full cream stuff, none of this gay fat free shit ! ? Link to comment https://www.sau.com.au/forums/topic/478869-rb25det-gearbox-rebuild-issue-4th-gear-locked/#findComment-7917782 Share on other sites More sharing options...
BK Posted October 15, 2019 Share Posted October 15, 2019 Out of curiosity, what did you use for sealant and what box oil you running ? Link to comment https://www.sau.com.au/forums/topic/478869-rb25det-gearbox-rebuild-issue-4th-gear-locked/#findComment-7917823 Share on other sites More sharing options...
hardsteppa Posted October 22, 2019 Author Share Posted October 22, 2019 Permatex grey sealant. Penrite gl4, some love, and then some more penrite gl4. Link to comment https://www.sau.com.au/forums/topic/478869-rb25det-gearbox-rebuild-issue-4th-gear-locked/#findComment-7918287 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now