Jump to content
SAU Community

Recommended Posts

Hi guys.I want to ask, can stock MFD cooperate with change to single turbo T04Z with aftermarket ECU ( in my case: european Ecumaster Emu classic :https://www.ecumaster.com/products/emu-classic/).

I don't want to use additional gauges.I want to stick with electronic screen display.Or is it possible to make a cooperation between aftmrkt ECU and mfd.?

Some say,Nismo MFD can bare that stuff with aftermarket ECUs,but still as far as Nismo MFD is hard to get,i want to know in the first place,can the primary one can handle this.

Thanks in advance for replies.

1 hour ago, Baroque said:

but still as far as Nismo MFD is hard to get

At this very moment, on this very forum.....

https://www.sau.com.au/forums/topic/478965-nismo-mfd-new/

 

As to the question....no, I'm pretty sure that the Nissan made display likes to talk to the Nissan made ECU, and nothing else.

Depends on the ECU - Mine's a Vipec (older model) - injector duty and throttle don't display properly but rest is fine.  It was resolved on newer Vipecs.  Lots of others work properly - PowerFC, Haltechs, newer Vipec/Link

Thank you guys.Good to know that even nismo is for sale,but at least i know its all about ECU,because at first i thought primary one,work only with stock ECU,and nismo handle other ECUs.So, i should get in depth about my potential Ecumaster and,if its not gonna work,i will choose between those written by choyda. Is there any differences or whats better or worse between these 3 you said above choyda??

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...