Jump to content
SAU Community

Can stock MFD cooperate with this? R34 RB26

Baroque
 Share

Recommended Posts

Baroque Apprentice

Baroque

Posted
Posted

Hi guys.I want to ask, can stock MFD cooperate with change to single turbo T04Z with aftermarket ECU ( in my case: european Ecumaster Emu classic :https://www.ecumaster.com/products/emu-classic/).

I don't want to use additional gauges.I want to stick with electronic screen display.Or is it possible to make a cooperation between aftmrkt ECU and mfd.?

Some say,Nismo MFD can bare that stuff with aftermarket ECUs,but still as far as Nismo MFD is hard to get,i want to know in the first place,can the primary one can handle this.

Thanks in advance for replies.

GTSBoy Grand Master

GTSBoy

Posted
Posted
1 hour ago, Baroque said:

but still as far as Nismo MFD is hard to get

At this very moment, on this very forum.....

https://www.sau.com.au/forums/topic/478965-nismo-mfd-new/

 

As to the question....no, I'm pretty sure that the Nissan made display likes to talk to the Nissan made ECU, and nothing else.

choyda Veteran

choyda

Posted
Posted

Depends on the ECU - Mine's a Vipec (older model) - injector duty and throttle don't display properly but rest is fine.  It was resolved on newer Vipecs.  Lots of others work properly - PowerFC, Haltechs, newer Vipec/Link

Baroque Apprentice

Baroque

Posted
  • Author
Posted

Thank you guys.Good to know that even nismo is for sale,but at least i know its all about ECU,because at first i thought primary one,work only with stock ECU,and nismo handle other ECUs.So, i should get in depth about my potential Ecumaster and,if its not gonna work,i will choose between those written by choyda. Is there any differences or whats better or worse between these 3 you said above choyda??

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      Turn signal wiring question

      By Dose Pipe Sutututu · Posted

      Convert to dual filament bulb   FWIW, it will look odd - I dare say a bit dumb as it looks like your flasher relay has shit the bed.
    • GTSBoy
      Possible swap on R34 RB20DE NEO?

      By GTSBoy · Posted

      If the RB20 box in the car is a push clutch, then yes, you will need to deal with the pull clutch on the turbo box. You either buy a pull clutch and don't use the old one, or you do the things needed to convert the turbo box's clutch arrangement over to push. Which is a bit of a f**karound. "Making" a custom tailshaft is the easy part. But you will need to source the front clip yoke - the bit that goes into the output of the gearbox. These are not as easy to find. They are out there, but they don't grow on trees the way that they used to.
    • GTSBoy
      Turn signal wiring question

      By GTSBoy · Posted

      Indicator bulbs are way too bright to use as a "corner marker" (we call them parking lights too). Sure. Go ahead and do it. But realise that you wil need to come up with all your own wiring to do it, as no-one will have a standard howto worked out for Skylines. It's just a matter of abandoning everything that Nissan have done and starting from scratch. You'd probably be better off retrofitting tailght/brakelight globe bases into the front indicator housings and using the taillight circuit for your corner marker and the brake light as the indicator. You'd need to work out how to kill the marker circuit while the indicator is flashing, otherwise it won't flash on-off, just bright-less bright.
    • Kapr
      Possible swap on R34 RB20DE NEO?

      By Kapr · Posted

      Hi. A little bit of an update. It maybe(hope not) looks like i would need a new tranny(it would be "maybe" a cheaper or better option anyway) So i need some info. I know i need a different propshaft(i can make custom one) LSD is not a problem cuz the engine will be still(for now) N/A RB20. So if i buy RB25DET NEO tranny...is there something else i need? I read something about push/pull type but i do not know if i need to "change" something or i can just plug n play onto my engine a go? Thanks for the advice  
    • OakvilleGTR
      Turn signal wiring question

      By OakvilleGTR · Posted

      Good morning all, Bit of a random question but figured I’d finally throw it out after wondering for a long while. Before I start, I'm hoping to do this purely out of personal preference. I think it would look better at night, and don't mind at all spending a few hours and dollars to get it done. I've copied this from a non-Skyline specific forum, so I apologize for the explanation of our headlight switch setup that we all know. Here we go: Zero lights (switch off) Parking lights (switch position 1) being a rectangular marker on the outside of the housing, my low beam being the projector in the centre (position 2), and a high beam triggered by my turn signal stalk. Most North American cars I’ve owned of this era have power to the amber corner (turning indicator) light as part of the first switch (parking lights). I’d love to have these amber corners receive power when the headlights and parking lights are on (headlight switch), yet still blink when using the turn signal which is of course a separate switch. Hopefully I’ve explained my question correctly. Is anyone aware of a way in which I might be able to achieve this? Thanks in advance
×
×
  • Create New...