Jump to content
SAU Community

Recommended Posts

hey all,

Im going back and forth what to do.

Im building a r32 gtst at the mo. the engine is tired tired, blowing smoke etc. I was going to drop a rb25 i had laying around but i cant be assed going through regency and dealing with all that rubbish now.

Id like to keep under the hood as standard as possible. Was going to forge it, but is there any worth while strocker kits? Is it even worth the time and effort? especially seeing as im going to keep a low mounted turbo, internally gated.

I keep going back and forth between just rebuilding, adding a cam and smaller responsive turbo and leave it at that.

Any ideas?

Link to comment
https://www.sau.com.au/forums/topic/479199-rb20/
Share on other sites

Well, the RB24 was born from jamming the 25 crank in and boring it out, wasn't it? Or was that RB23 and you get 24 from a 26 crank? Either way, you could enbiggen it reasonably easily.

'Twere me though, having to live with an RB20 again, I'd strap a supercharger onto it down low on the exhaust side and twincharge the f**ker. Make an effective 3L out of the 20+blower and then turbo for that.

You know you want to.

Link to comment
https://www.sau.com.au/forums/topic/479199-rb20/#findComment-7919893
Share on other sites

Why bother with Regency, stick the 25 in. No half arsed copper could tell the difference by looking in the bay, plenty of plods have looked in my bay and none have said "Hey thats a 3.0litre in there". Just need plenty of thick paint over the engine number.

Link to comment
https://www.sau.com.au/forums/topic/479199-rb20/#findComment-7919899
Share on other sites

as said rb25 with rb20 covers on it no one would know

 

Anyway i had a full forged etc rb22 in my drift car for years - in terms of better than rb20 yes but marginally more came from the boost I was able to put in it and because I was drifting so always in high revs.... eventually swapped to stock rb25 - which was just way better

ie: either mild rb20 or rb25 too much $ for not enough return for rb20 stroker

Link to comment
https://www.sau.com.au/forums/topic/479199-rb20/#findComment-7919901
Share on other sites

Pretty sure no one, well no one that matters, cares about cam covers.

When I have been pulled over it was always only the rego plate check, and obvious defectable modifications, the only time the engine/body number and tags were wanted was when I had my 25/30 engineered and added to the rego,  1 Hwy patrol officer who was very thorough (he seemed overly angry at the world) and once at a pop up RTA (RMS) inspection station on the Foreshore in Botany.

This all counts for nothing if your involved in a big crash and/or insurance companies get involved.

If a insurance company can prove you car is not roadworthy they pay nothing, having a different engine than what is on the rego papers instantly makes the car unroadworthy.

It would negate the green slip 3rd party as well.

Food for thought for a worse case senario situation.

Link to comment
https://www.sau.com.au/forums/topic/479199-rb20/#findComment-7919906
Share on other sites

36 minutes ago, mlr said:

having a different engine than what is on the rego papers instantly makes the car unroadworthy

I always hear that kind of statement but never directly from anyone that it has happened to

  

 

Has it ever actually happened?

Link to comment
https://www.sau.com.au/forums/topic/479199-rb20/#findComment-7919907
Share on other sites

1 hour ago, mlr said:

If a insurance company can prove you car is not roadworthy they pay nothing, having a different engine than what is on the rego papers instantly makes the car unroadworthy.

 

38 minutes ago, Ben C34 said:

I always hear that kind of statement but never directly from anyone that it has happened to

Has it ever actually happened?

The actual truth is that the "illegal" / "unroadworthy" / "unapproved" modification has to contribute to the incident that causes the claim for the company to deny the claim. If the insurance company cannot show that the mod was at least partially responsible for the claim, they cannot deny the claim.

That's a pretty low bar though, and one would have to be pretty wary about things that would be very easy for them to make a statement that you couldn't refute. Wheel spacers would be an easy one for them, for example. An illegal, much bigger than permitted, non-engineered engine swap would be something that they would have to have seen a lot of times before and be well prepared with statements about how that could cause just about any incident.

I wouldn't ever bet against a motivated insurance company.

Link to comment
https://www.sau.com.au/forums/topic/479199-rb20/#findComment-7919909
Share on other sites

1 hour ago, GTSBoy said:

 

The actual truth is that the "illegal" / "unroadworthy" / "unapproved" modification has to contribute to the incident that causes the claim for the company to deny the claim. If the insurance company cannot show that the mod was at least partially responsible for the claim, they cannot deny the claim.

That's a pretty low bar though, and one would have to be pretty wary about things that would be very easy for them to make a statement that you couldn't refute. Wheel spacers would be an easy one for them, for example. An illegal, much bigger than permitted, non-engineered engine swap would be something that they would have to have seen a lot of times before and be well prepared with statements about how that could cause just about any incident.

I wouldn't ever bet against a motivated insurance company.

In my insurance agreement it states that my insurance can be void if I don't inform the insurer of any changes.

Not my insurance company, but.....

3. Modifying your car (without telling your insurer)

https://www.finder.com.au/car-insurance-exclusions

My suggestion is to read your agreement, in the end expect the insurance company to come at you pistols blazing.

 

Link to comment
https://www.sau.com.au/forums/topic/479199-rb20/#findComment-7919917
Share on other sites

If you advise your insurance company of a modification and that modification is not actually approved by the vehicle standards department, they can still crap on your claim. If you read these clauses in most (if not all) insurance documentation you will see weasel words hidden in there about how the mods have to actually be legal.

If I told my insurance company that I'd put a forward facing hornet scoop on my car, over the top of a tunnel rammed carb fed 600 cu.in V8, they'd say, "Thanks for the advice". It would not be any good if I had an accident where I scalped a pedestrian when the throttle cable jammed open in a carpark burnout and put the car into the crowd though. They would be well within their rights to point to the pedestrian maimer on the bonnet covering the non-emissions compliant, 3x too large engine and laugh at me.

Link to comment
https://www.sau.com.au/forums/topic/479199-rb20/#findComment-7919919
Share on other sites

21 minutes ago, GTSBoy said:

If you advise your insurance company of a modification and that modification is not actually approved by the vehicle standards department, they can still crap on your claim. If you read these clauses in most (if not all) insurance documentation you will see weasel words hidden in there about how the mods have to actually be legal.

If I told my insurance company that I'd put a forward facing hornet scoop on my car, over the top of a tunnel rammed carb fed 600 cu.in V8, they'd say, "Thanks for the advice". It would not be any good if I had an accident where I scalped a pedestrian when the throttle cable jammed open in a carpark burnout and put the car into the crowd though. They would be well within their rights to point to the pedestrian maimer on the bonnet covering the non-emissions compliant, 3x too large engine and laugh at me.

Yeap, this is why I paid a kidney to insure my "engineered" shit box R33 Skyline with comprehensive, and ended up swapping to third party fire and theft.

I am currently working on getting my 86 engineered, doing so will be fine for my rego and green slip, BUT, the cost of comprehensive insurance for it will be as high as Amy Winehouse on a bender.

That's if I can find a insurer that will cover it.

Meh, third party fire & theft may be an cheaper option or third party property cover if all else fails.

The only way to be safe insurance wise it to get an engineering certificate for all modifications stating the car meets all required guidelines and declare every modification on your insurance agreement.

It's possible to be covered and not get rogered, but you need to follow the bouncing ball then stick your hand deep into your pocket.

Or, risk it for the biscuit......

Mmmmmmm, biscuits 

1163321574_images(6).jpeg.1b28a8004c6da63fa74f92a920d0d789.jpeg

Link to comment
https://www.sau.com.au/forums/topic/479199-rb20/#findComment-7919921
Share on other sites

1 hour ago, Adz2332 said:

or more budget friendly option lol

I thought it was way cool, till I looked at the price. Well, if you had a HR31 GTS-R that didn't have one, and it was mint, then yeah, I guess, maybe....

 

$5k, wow

Link to comment
https://www.sau.com.au/forums/topic/479199-rb20/#findComment-7919964
Share on other sites

I  got my car certified for all the mods. Yes it cost $600 but that's peanuts compared to the $$$ I poured in to the mods. In NZ all the mods that are allowable if certed are covered by regs so you make sure your car can be approved before you get an inspection. If in doubt or you don't have access to such regs talk to an inspector before you start to make sure its going to be able to be certed.

  • Thanks 1
Link to comment
https://www.sau.com.au/forums/topic/479199-rb20/#findComment-7919968
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Now that the break-in period for both clutch and transmission is nearly over I'd like to give some tips before I forget about everything that happened, also for anyone searching up how to do this job in the future: You will need at least 6 ton jack stands at full extension. I would go as far as to say maybe consider 12 ton jack stands because the height of the transmission + the Harbor Freight hydraulic platform-style transmission jack was enough that it was an absolute PITA getting the transmission out from under the car and back in. The top edge of the bellhousing wants to contact the subframe and oil pan and if you're doing this on the floor forget about trying to lift this transmission off the ground and onto a transmission jack from under the car. Also do not try to use a scissor jack transmission lift. You have to rotate the damn thing in-place on the transmission jack which is hard enough with an adjustable platform and a transmission cradle that will mostly keep the transmission from rolling off the jack but on a scissor lift with a tiny non-adjustable platform? Forget it. Use penetrating oil on the driveshaft bolts. I highly recommend getting a thin 6 point combination (box end + open end) wrench for both the rear driveshaft and front driveshaft and a wrench extension. These bolts are on tight with very little space to work with and those two things together made a massive difference. Even a high torque impact wrench is just the wrong tool for the job here and didn't do what I needed it to do. If your starter bolts aren't seized in place for whatever reason you can in fact snake in a 3/8 inch ratchet + 6 point standard chrome socket up in there and "just" remove the bolts for the starter. Or at least I could. It is entirely by feel, you can barely fit it in, you can barely turn the stupid ratchet, but it is possible. Pull the front pipe/downpipe before you attempt to remove the transmission. In theory you don't have to, in practice just do it.  When pulling the transmission on the way out you don't have to undo all the bolts holding the rear driveshaft to the chassis like the center support bearing and the rear tunnel reinforcement bar but putting the transmission back in I highly recommend doing this because it will let you raise the transmission without constantly dealing with the driveshaft interfering in one way or another. I undid the bottom of the engine mount but I honestly don't know that it helped anything. If you do this make sure you put a towel on the back of the valve cover to keep the engine from smashing all the pipes on the firewall. Once the transmission has been pulled back far enough to clear the dowels you need to twist it in place clockwise if you're sitting behind the transmission. This will rotate the starter down towards the ground. The starter bump seems like it might clear if you twist the transmission the other way but it definitely won't. I have scraped the shit out of my transmission tunnel trying so learn from my mistake. You will need a center punch and an appropriate size drill bit and screw to pull the rear main seal. Then use vice grips and preferably a slide hammer attachment for those vice grips to yank the seal out. Do not let the drill or screw contact any part of the crank and clean the engine carefully after removing the seal to avoid getting metal fragments into the engine. I used a Slide Hammer and Bearing Puller Set, 5 Piece from Harbor Freight to pull the old pilot bearing. The "wet paper towel" trick sucked and just got dirty clutch water everywhere. Buy the tool or borrow it from a friend and save yourself the pain. It comes right out. Mine was very worn compared to the new one and it was starting to show cracks. Soak it in engine oil for a day in case yours has lost all of the oil to the plastic bag it comes in. You may be tempted to get the Nismo aftermarket pilot bearing but local mechanics have told me that they fail prematurely and if they do fail they do far more damage than a failed OEM pilot bushing. I mentioned this before but the Super Coppermix Twin clutch friction disks are in fact directional. The subtle coning of the fingers in both cases should be facing towards the center of the hub. So the coning on the rearmost disk closest to the pressure plate should go towards the engine, and the one closest to the flywheel should be flipped the other way. Otherwise when you torque down the pressure plate it will be warped and if you attempt to drive it like this it will make a very nasty grinding noise. Also, there is in fact an orientation to the washers for the pressure plate if you don't want to damage the anodizing. Rounded side of the washer faces the pressure plate. The flat side faces the bolt head. Pulling the transmission from the transfer case you need to be extremely careful with the shift cover plate. This part is discontinued. Try your best to avoid damaging the mating surfaces or breaking the pry points. I used a dead blow rubber hammer after removing the bolts to smack it sideways to slide it off the RTV the previous mechanic applied. I recommend using gasket dressing on the OEM paper gasket to try and keep the ATF from leaking out of that surface which seems to be a perpetual problem. Undoing the shifter rod end is an absolute PITA. Get a set of roll pin punches. Those are mandatory for this. Also I strongly, strongly recommend getting a palm nailer that will fit your roll pin punch. Also, put a clean (emphasis on clean) towel wrapped around the back end of the roll pin to keep it from shooting into the transfer case so you can spend a good hour or two with a magnet on a stick getting it out. Do not damage the shifter rod end either because those are discontinued as well. Do not use aftermarket flywheel bolts. Or if you do, make sure they are exactly the same dimensions as OEM before you go to install them. I have seen people mention that they got the wrong bolts and it meant having to do the job again. High torque impact wrench makes removal easy. I used some combination of a pry bar and flathead screwdriver to keep the flywheel from turning but consider just buying a proper flywheel lock instead. Just buy the OS Giken clutch alignment tool from RHDJapan. I hated the plastic alignment tool and you will never be confident this thing will work as intended. Don't forget to install the Nismo provided clutch fork boot. Otherwise it will make unearthly noises when you press the clutch pedal as it says on the little installation sheet in Japanese. Also, on both initial disassembly and assembly you must follow torque sequence for the pressure plate bolts. For some reason the Nismo directions tell you to put in the smaller 3 bolts last. I would not do this. Fully insert and thread those bolts to the end first, then tighten the other larger pressure plate bolts according to torque sequence. Then at the end you can also torque these 3 smaller bolts. Doing it the other way can cause these bolts to bind and the whole thing won't fit as it should. Hope this helps someone out there.
    • Every one has seemed to of have missed . . . . . . . The Mazda Cosmo . . . . . . what a MACHINE ! !
    • I might have gone a little more South Efrican.  But this is off topic.   😍😍 FD 😍😍
    • I think you might have skipped a whole vowel sounds there C.
×
×
  • Create New...