Jump to content
SAU Community

Recommended Posts

Hi all,

 

I'm in the States just outside of Detroit, Michigan and I have an R33 GTS25T. I bought it in January this year with allegedly 123,000 km on it (impulse buy and probably paid too much for it from an importer). I enjoyed it for 5,000km before something in the engine let go in August and it started knocking badly at startup one morning. The oil and filter had lots of copper sheen and a little fleck in it, so I pulled the engine in October. Haven't done much since then but tonight I plan to take apart the bottom end to hopefully find exactly what went wrong. I'm hoping it's just worn bearings and I can get the crank polished and pop in new bearings, but if it's worse than that I'll have to figure out a replacement engine or find someone to rebuild my RB25.

 

I've been coming to SAU since I bought my car, lots of great info here, and I figured I should register.

 

Josh

20191005_190252.jpg

IMG_20190808_220916_600.jpg

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/479215-hello-from-detroit/
Share on other sites

Welcome aboard Josh (boat joke in there somewhere!).

You have a super clean looking car, engine troubles aside. Sorry to hear it didn't last all that long for you. 

The hive mind that is SAU should be able to help you with any issues or questions you have... not me though. I don't know anything! ? (I just come here for the pictures!)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would like more noise related info for my truly uneducated guess  Does it do it at idle or when revving, clutch engaged, and disengaged? Does it only do it when the car is moving? I've heard "similar" noises from a clutch pack that left the chat room, and CV joints that have chewed themselves out But as Matt said, how's the yokes, tailshaft and centre bearing going after their last little issue Fingers crossed it is something simple  Weird noises make me cringe 
    • One other question, is there a chance that changing the idle speed can lead you down a rabbit hole and is the reason the tuner didn't touch it? Reason I ask is because if that's the reason the tuner avoided it then I probably shouldn't be touching it lol.
    • Pfft. As if I'd ever point a high pressure washer at my car.
    • The nature of my commute has changed. Way back then it was traffic lights all the way, for ~28km. It sucked. When they finally stitched the expressway together I could do a good 15+km of it at a steady 80-100 with no stopping. That alone has gotten me down to flat 10s. Prior to that it was mid-high 10s. I can't remember the delta that I saw when I got the idle down. It was only ~150 rpm, because the idle speed was never terrible, but for the delta in consumption to be noticeable it would have had to have been at least 0.2-0.3 L/100km - which is not to be sneezed at when it comes for absolute free. It's only about 50L per year, but that's ~$100. A few extra pizzas is always welcome. Note that I have a record of every tank of fuel that has ever gone through my car except for a handful put in by someone else, like my mechanic. I can show you the difference between stock RB20 and tuned RB20, stock RB5Neo and tuned, winter and summer fuel blends, winter and summer fuel blends when the ambient temperature is not appropriate for the blend, working O2 sensor, blown O2 sensor, boosting f**k out of it and frightened to boost it because it is pinging, and so on. OK, I probably can't do all that now with 100% clarity - but at the time when any of those things were in event, you could see it in the records. There's 25+ years of simple tank after tank records, so you have to look for landmarks to work out approximately how old any single record is. What's really important is the meta data and that lives in my head.
    • If you're claiming the issues are not skyline specific, then either the USA is living in the 90s / early 2000s, OR you have the issue of "survivor bias". Which is you're mainly hearing and listening to those with terrible experiences, and haven't found the guys who have cars with good decent builds and no problems. It happens in AU too, that plenty of people keep having issues, and they keep going to the workshops that are known to be shit "because I read on the internet". Even worse, are those who keep posting on the internet as though they know for a fact what something is, when they've never touched/looked at said item in their life, and again are making assumptions, based on something they read, or because it's a certain way in other cars. It's even funnier when those same people debate the facts with the people who've lived and breathed this stuff for over 15 years. Example, I've had someone tell me you can't do something with a Skyline, because they read it on the internet, except I can tell they're wrong, as I did that exact thing back in 2008 with my Skyline.
×
×
  • Create New...