Jump to content
SAU Community

Recommended Posts

INASNT - have you ever tried changing the oil filter on an early R32GTR with the HICAS pump in there too??

You need little monkey hands of a midget and arms like a flexi-joint to get in there!

So yes, it is much easier.

As the car is still in the garage on jack stands, there is no chance of running over anything :)

have to clear the defect by next week or the car becomes unregistered.

  • Replies 219
  • Created
  • Last Reply

Top Posters In This Topic

INASNT - have you ever tried changing the oil filter on an early R32GTR with the HICAS pump in there too??

Checks garage.......................................................

Nope :)

have to clear the defect by next week or the car becomes unregistered.

Is there anything in the vicroads book about having items sticking out from under the undercarage of the car?

Talked to Toby today on the phone, I'm going down there tomorrow and let him see my car to figure out the installation, but I'd reckon it'll be easy as my ARC FMIC piping returns back to the stock piping location so there's plenty of space behind my driver side front bar!

Come on guys need at least one more person to make the group buy happen.

I dont want to hold onto these guys hard earned dollars for much longer.

Can people please respond to my PM's. All I need is a yes or no.

Ok, this round of the group buy isn't going well.

I have the following people confirmed

1. RS73 - Rainto

2. JGB33 - Jason

3. LTSJayce - Jayson

Is anyone else able to commit to this? Have I missed anyone?

sorry mate I am keen as, but have had a car accident and other incidentals - I am going to have to wait until mid-end January before I can have the cash available. Sorry, I might have to wait until the next buy.

Speaking only for myself,I'm happy to wait so as to get the good price.My mechanic is on hol's anyway,so I can't get into the workshop to fit it up anyway...

1. RS73 - Rainto

It's Rianto not Rainto :-)

Just thought to let u guys know, I've had mine installed yesterday.

They did a good job, very neat and sturdy installation mount/bracket

was used and it's sitting there quite stealth behind the frontbar.

Yes. Toby has been kind enuf to let us have the group buy price even thou we only have three people. So the other two kits will ship shortly. I have transfered the funds to Meridian.

Speaking only for myself,I'm happy to wait so as to get the good price.My mechanic is on hol's anyway,so I can't get into the workshop to fit it up anyway...

As weird as it is replying to my own post,I just had to say :) -my kit just showed up!Talk about fast service!Those of you waiting-it's worth the (short) wait;for those thinking about getting a kit:do it!Great value for money!The filter relocation block is a work of art,I reckon!

  • 2 months later...
  • 1 month later...

hi sorry not suer if this has been answered.. thread soo long read the first few pages... do they sell the hose kits with the core? ie just the push lock hoses and fittings or braided lines and fittings?

thanks

The prices in the first post include a Serk 19 Row oil cooler. As for all the fittings and line we can pretty much cusomise it all depending weather you want braided or pushlock, remote oil filter or not, and mounted front left bar, front right bar, or behind radiator.

Price varies depending on the hose type and length. Also the type of fittings required.

But you can just tell me what hose type , and where you will mount it and I can give you a price. Please look at the first post for a rough guide.

Hi Scots.

I just want my where Adz has his.

Drivers side behind the air duct in the front bumper.

Puch Lock fittings.

Want it ASAP please.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • It only looks tidy, as most of the stuff that was on the whole back wall, is now in the trailer to go to the tip, or has been shoved in my 2.2x2.4m "Spare parts room", and now I can't get to anything in there Ha ha ha I could definitely do with a bit more space, but I'd just end up with your problems I'm going to enclose the car port beside the garage, and move a lot of stuff into it I think. OR... It will be setup as a fabrication area, and the main garage will have parts storage in it. I'm not sure yet... Need some pictures of that big shed you've got with the bikes and Skyline in
    • No. I think it's gone. 😭 I think you can get body coloured ones on eBay so I think I'll get one of those... Or just hang a red ribbon from the hole and whack a TOW sticker next to it.
    • Can't say I've had a bad experience with one on my car, then again it only gets washed once or twice a year... The wheels on the other hand, get a good spray often due to my shitty dusty pads.
    • @MBS206 thats pretty neat and tidy to me!  I'll get a photo of mine when I'm out there next. It might require multiple photos to understand the scale of the atrocities though... In total I have 4 sheds of varying sizes and layouts. Main shed is 14x8, second shed is 3x8, third shed is 11x2.5, fourth shed is around 6x4.  All are pretty much full.   The main goal of my cleaning tsunami is to make the main shed predominantly car and motorbikes only. Second shed is my metal fab room (2 x bench grinders, drill press, bench belt sander, metal band saw, scrap metal storage and some of my garden tools.  3rd shed is more bigger garden stuff, storage for engine crane, jack stands, concrete grinder, concrete mixer, air compressor lives there, and it now has two 2mx2m pallet racking shelves with itemised boxes holding building stuff, electrical stuff, plumbing stuff, etc, etc.  The 4th shed is Ryobi electric ride on mower, mini boom sprayer, ancient Kubota tractor, more garden stuff!  I have got a lot of shit....  Then there's the pool house (8mx4m) and the pool pump shed (4mx4m).  I built all of the sheds over the 11 years we've been here.  The main shed was a Ranbuild kit, the rest are all custom made to fit the areas available. Building the main shed taught me a LOT as I had no idea about building anything prior to that!  I've still got one more in me. It will be my man cave which I poured the extra concrete for way back when I poured the concrete for the main shed. The idea is the Skyline will be a centre piece of the main cave once (if...) it's finished.  I told my now 14 year old son yesterday that I will 100% drive him to his year 10 formal in 2 years. Still a long way off but at least I now have a date to work towards! 🤣
    • Modern oils are amazing. Add tyres to that as well.
×
×
  • Create New...